lkml.org 
[lkml]   [2020]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v3 2/5] phy: samsung-ufs: add UFS PHY driver for samsung SoC
Date
Hi Kishon

> -----Original Message-----
> From: Kishon Vijay Abraham I <kishon@ti.com>
> Sent: 20 March 2020 11:10
> To: Alim Akhtar <alim.akhtar@samsung.com>; robh+dt@kernel.org;
> devicetree@vger.kernel.org; linux-scsi@vger.kernel.org
> Cc: krzk@kernel.org; avri.altman@wdc.com; martin.petersen@oracle.com;
> kwmad.kim@samsung.com; stanley.chu@mediatek.com;
> cang@codeaurora.org; linux-samsung-soc@vger.kernel.org; linux-arm-
> kernel@lists.infradead.org; linux-kernel@vger.kernel.org
> Subject: Re: [PATCH v3 2/5] phy: samsung-ufs: add UFS PHY driver for samsung
> SoC
>
> Hi Alim,
>
> On 3/19/2020 8:30 PM, Alim Akhtar wrote:
> > This patch introduces Samsung UFS PHY driver. This driver supports to
> > deal with phy calibration and power control according to UFS host
> > driver's behavior.
> >
> > Reviewed-by: Kiwoong Kim <kwmad.kim@samsung.com>
> > Signed-off-by: Seungwon Jeon <essuuj@gmail.com>
> > Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> > Cc: Kishon Vijay Abraham I <kishon@ti.com>
> > ---
> > drivers/phy/samsung/Kconfig | 9 +
> > drivers/phy/samsung/Makefile | 1 +
> > drivers/phy/samsung/phy-exynos7-ufs.h | 85 +++++++
> > drivers/phy/samsung/phy-samsung-ufs.c | 311
> ++++++++++++++++++++++++++
> > drivers/phy/samsung/phy-samsung-ufs.h | 100 +++++++++
> > include/linux/phy/phy-samsung-ufs.h | 70 ++++++
>
> Why is this added in include directory? will it be used by controller driver?
>
Thanks for point this out, as of today it is not used in ufs controller driver. Will move this to driver directory.

> Thanks
> Kishon
> > 6 files changed, 576 insertions(+)
> > create mode 100644 drivers/phy/samsung/phy-exynos7-ufs.h
> > create mode 100644 drivers/phy/samsung/phy-samsung-ufs.c
> > create mode 100644 drivers/phy/samsung/phy-samsung-ufs.h
> > create mode 100644 include/linux/phy/phy-samsung-ufs.h
> >
> > diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
> > index 9e483d1fdaf2..fc1e3c17f842 100644
> > --- a/drivers/phy/samsung/Kconfig
> > +++ b/drivers/phy/samsung/Kconfig
> > @@ -29,6 +29,15 @@ config PHY_EXYNOS_PCIE
> > Enable PCIe PHY support for Exynos SoC series.
> > This driver provides PHY interface for Exynos PCIe controller.
> >
> > +config PHY_SAMSUNG_UFS
> > + tristate "SAMSUNG SoC series UFS PHY driver"
> > + depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
> > + select GENERIC_PHY
> > + help
> > + Enable this to support the Samsung UFS PHY driver for
> > + Samsung SoCs. This driver provides the interface for UFS
> > + host controller to do PHY related programming.
> > +
> > config PHY_SAMSUNG_USB2
> > tristate "Samsung USB 2.0 PHY driver"
> > depends on HAS_IOMEM
> > diff --git a/drivers/phy/samsung/Makefile
> > b/drivers/phy/samsung/Makefile index db9b1aa0de6e..3959100fe8a2 100644
> > --- a/drivers/phy/samsung/Makefile
> > +++ b/drivers/phy/samsung/Makefile
> > @@ -2,6 +2,7 @@
> > obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
> > obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
> > obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o
> > +obj-$(CONFIG_PHY_SAMSUNG_UFS) += phy-samsung-ufs.o
> > obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
> > phy-exynos-usb2-y += phy-samsung-usb2.o
> > phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-
> usb2.o
> > diff --git a/drivers/phy/samsung/phy-exynos7-ufs.h
> > b/drivers/phy/samsung/phy-exynos7-ufs.h
> > new file mode 100644
> > index 000000000000..da981c1ac040
> > --- /dev/null
> > +++ b/drivers/phy/samsung/phy-exynos7-ufs.h
> > @@ -0,0 +1,85 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * UFS PHY driver data for Samsung EXYNOS7 SoC
> > + *
> > + * Copyright (C) 2015 Samsung Electronics Co., Ltd.
> > + */
> > +#ifndef _PHY_EXYNOS7_UFS_H_
> > +#define _PHY_EXYNOS7_UFS_H_
> > +
> > +#include "phy-samsung-ufs.h"
> > +
> > +#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL 0x720
> > +#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_MASK 0x1
> > +#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_EN BIT(0)
> > +
> > +/* Calibration for phy initialization */ static const struct
> > +samsung_ufs_phy_cfg exynos7_pre_init_cfg[] = {
> > + PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_ANY),
> > + PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_ANY),
> > + PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_ANY),
> > + PHY_COMN_REG_CFG(0x017, 0x84, PWR_MODE_ANY),
> > + PHY_TRSV_REG_CFG(0x035, 0x58, PWR_MODE_ANY),
> > + PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_ANY),
> > + PHY_TRSV_REG_CFG(0x037, 0x40, PWR_MODE_ANY),
> > + PHY_TRSV_REG_CFG(0x03b, 0x83, PWR_MODE_ANY),
> > + PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_ANY),
> > + PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_ANY),
> > + PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_ANY),
> > + PHY_TRSV_REG_CFG(0x04c, 0x5b, PWR_MODE_ANY),
> > + PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_ANY),
> > + PHY_TRSV_REG_CFG(0x05c, 0x14, PWR_MODE_ANY),
> > + END_UFS_PHY_CFG
> > +};
> > +
> > +static const struct samsung_ufs_phy_cfg exynos7_post_init_cfg[] = {
> > + END_UFS_PHY_CFG
> > +};
> > +
> > +/* Calibration for HS mode series A/B */ static const struct
> > +samsung_ufs_phy_cfg exynos7_pre_pwr_hs_cfg[] = {
> > + PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_HS_ANY),
> > + PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_HS_ANY),
> > + PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_HS_ANY),
> > + /* Setting order: 1st(0x16, 2nd(0x15) */
> > + PHY_COMN_REG_CFG(0x016, 0xff, PWR_MODE_HS_ANY),
> > + PHY_COMN_REG_CFG(0x015, 0x80, PWR_MODE_HS_ANY),
> > + PHY_COMN_REG_CFG(0x017, 0x94, PWR_MODE_HS_ANY),
> > + PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_HS_ANY),
> > + PHY_TRSV_REG_CFG(0x037, 0x43, PWR_MODE_HS_ANY),
> > + PHY_TRSV_REG_CFG(0x038, 0x3f, PWR_MODE_HS_ANY),
> > + PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_HS_G2_SER_A),
> > + PHY_TRSV_REG_CFG(0x042, 0xbb, PWR_MODE_HS_G2_SER_B),
> > + PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_HS_ANY),
> > + PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_HS_ANY),
> > + PHY_TRSV_REG_CFG(0x034, 0x35, PWR_MODE_HS_G2_SER_A),
> > + PHY_TRSV_REG_CFG(0x034, 0x36, PWR_MODE_HS_G2_SER_B),
> > + PHY_TRSV_REG_CFG(0x035, 0x5b, PWR_MODE_HS_G2_SER_A),
> > + PHY_TRSV_REG_CFG(0x035, 0x5c, PWR_MODE_HS_G2_SER_B),
> > + END_UFS_PHY_CFG
> > +};
> > +
> > +/* Calibration for HS mode series A/B atfer PMC */ static const
> > +struct samsung_ufs_phy_cfg exynos7_post_pwr_hs_cfg[] = {
> > + PHY_COMN_REG_CFG(0x015, 0x00, PWR_MODE_HS_ANY),
> > + PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_HS_ANY),
> > + END_UFS_PHY_CFG
> > +};
> > +
> > +static const struct samsung_ufs_phy_cfg
> *exynos7_ufs_phy_cfgs[CFG_TAG_MAX] = {
> > + [CFG_PRE_INIT] = exynos7_pre_init_cfg,
> > + [CFG_POST_INIT] = exynos7_post_init_cfg,
> > + [CFG_PRE_PWR_HS] = exynos7_pre_pwr_hs_cfg,
> > + [CFG_POST_PWR_HS] = exynos7_post_pwr_hs_cfg,
> > +};
> > +
> > +static struct samsung_ufs_phy_drvdata exynos7_ufs_phy = {
> > + .cfg = exynos7_ufs_phy_cfgs,
> > + .isol = {
> > + .offset = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL,
> > + .mask = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_MASK,
> > + .en = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_EN,
> > + },
> > +};
> > +
> > +#endif /* _PHY_EXYNOS7_UFS_H_ */
> > diff --git a/drivers/phy/samsung/phy-samsung-ufs.c
> > b/drivers/phy/samsung/phy-samsung-ufs.c
> > new file mode 100644
> > index 000000000000..2d5db24de49b
> > --- /dev/null
> > +++ b/drivers/phy/samsung/phy-samsung-ufs.c
> > @@ -0,0 +1,311 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * UFS PHY driver for Samsung SoC
> > + *
> > + * Copyright (C) 2015 Samsung Electronics Co., Ltd.
> > + * Author: Seungwon Jeon <essuuj@gmail.com>
> > + * Author: Alim Akhtar <alim.akhtar@samsung.com>
> > + *
> > + */
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/err.h>
> > +#include <linux/of.h>
> > +#include <linux/io.h>
> > +#include <linux/iopoll.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <linux/module.h>
> > +#include <linux/phy/phy.h>
> > +#include <linux/phy/phy-samsung-ufs.h> #include
> > +<linux/platform_device.h> #include <linux/regmap.h>
> > +
> > +#include "phy-samsung-ufs.h"
> > +
> > +#define for_each_phy_lane(phy, i) \
> > + for (i = 0; i < (phy)->lane_cnt; i++) #define for_each_phy_cfg(cfg)
> > +\
> > + for (; (cfg)->id; (cfg)++)
> > +
> > +#define PHY_DEF_LANE_CNT 1
> > +
> > +static void samsung_ufs_phy_config(struct samsung_ufs_phy *phy,
> > + const struct samsung_ufs_phy_cfg *cfg, u8 lane) {
> > + enum {LANE_0, LANE_1}; /* lane index */
> > +
> > + switch (lane) {
> > + case LANE_0:
> > + writel(cfg->val, (phy)->reg_pma + cfg->off_0);
> > + break;
> > + case LANE_1:
> > + if (cfg->id == PHY_TRSV_BLK)
> > + writel(cfg->val, (phy)->reg_pma + cfg->off_1);
> > + break;
> > + }
> > +}
> > +
> > +int samsung_ufs_phy_wait_for_lock_acq(struct phy *phy) {
> > + struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
> > + const unsigned int timeout_us = 100000;
> > + const unsigned int sleep_us = 10;
> > + u32 val;
> > + int err;
> > +
> > + err = readl_poll_timeout(
> > + ufs_phy->reg_pma +
> PHY_APB_ADDR(PHY_PLL_LOCK_STATUS),
> > + val, (val & PHY_PLL_LOCK_BIT), sleep_us, timeout_us);
> > + if (err) {
> > + dev_err(ufs_phy->dev,
> > + "failed to get phy pll lock acquisition %d\n", err);
> > + goto out;
> > + }
> > +
> > + err = readl_poll_timeout(
> > + ufs_phy->reg_pma +
> PHY_APB_ADDR(PHY_CDR_LOCK_STATUS),
> > + val, (val & PHY_CDR_LOCK_BIT), sleep_us, timeout_us);
> > + if (err) {
> > + dev_err(ufs_phy->dev,
> > + "failed to get phy cdr lock acquisition %d\n", err);
> > + goto out;
> > + }
> > +
> > +out:
> > + return err;
> > +}
> > +
> > +int samsung_ufs_phy_calibrate(struct phy *phy) {
> > + struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
> > + struct samsung_ufs_phy_cfg **cfgs = ufs_phy->cfg;
> > + const struct samsung_ufs_phy_cfg *cfg;
> > + int i;
> > + int err = 0;
> > +
> > + if (unlikely(ufs_phy->ufs_phy_state < CFG_PRE_INIT ||
> > + ufs_phy->ufs_phy_state >= CFG_TAG_MAX)) {
> > + dev_err(ufs_phy->dev, "invalid phy config index %d\n",
> > + ufs_phy-
> >ufs_phy_state);
> > + return -EINVAL;
> > + }
> > +
> > + if (ufs_phy->is_pre_init)
> > + ufs_phy->is_pre_init = false;
> > + if (ufs_phy->is_post_init) {
> > + ufs_phy->is_post_init = false;
> > + ufs_phy->ufs_phy_state = CFG_POST_INIT;
> > + }
> > + if (ufs_phy->is_pre_pmc) {
> > + ufs_phy->is_pre_pmc = false;
> > + ufs_phy->ufs_phy_state = CFG_PRE_PWR_HS;
> > + }
> > + if (ufs_phy->is_post_pmc) {
> > + ufs_phy->is_post_pmc = false;
> > + ufs_phy->ufs_phy_state = CFG_POST_PWR_HS;
> > + }
> > +
> > + switch (ufs_phy->ufs_phy_state) {
> > + case CFG_PRE_INIT:
> > + ufs_phy->is_post_init = true;
> > + break;
> > + case CFG_POST_INIT:
> > + ufs_phy->is_pre_pmc = true;
> > + break;
> > + case CFG_PRE_PWR_HS:
> > + ufs_phy->is_post_pmc = true;
> > + break;
> > + case CFG_POST_PWR_HS:
> > + break;
> > + default:
> > + dev_err(ufs_phy->dev, "wrong state for phy calibration\n");
> > + }
> > +
> > + cfg = cfgs[ufs_phy->ufs_phy_state];
> > + if (!cfg)
> > + goto out;
> > +
> > + for_each_phy_cfg(cfg) {
> > + for_each_phy_lane(ufs_phy, i) {
> > + samsung_ufs_phy_config(ufs_phy, cfg, i);
> > + }
> > + }
> > +
> > + if (ufs_phy->ufs_phy_state == CFG_POST_PWR_HS)
> > + err = samsung_ufs_phy_wait_for_lock_acq(phy);
> > +out:
> > + return err;
> > +}
> > +
> > +static int samsung_ufs_phy_clks_init(struct samsung_ufs_phy *phy) {
> > + struct clk *child, *parent;
> > +
> > + child = devm_clk_get(phy->dev, "ref_clk");
> > + if (IS_ERR(child))
> > + dev_err(phy->dev, "failed to get ref_clk clock\n");
> > + else
> > + phy->ref_clk = child;
> > +
> > + parent = devm_clk_get(phy->dev, "ref_clk_parent");
> > + if (IS_ERR(parent))
> > + dev_err(phy->dev, "failed to get ref_clk_parent clock\n");
> > + else
> > + phy->ref_clk_parent = parent;
> > +
> > + return clk_set_parent(child, parent); }
> > +
> > +static int samsung_ufs_phy_init(struct phy *phy) {
> > + struct samsung_ufs_phy *_phy = get_samsung_ufs_phy(phy);
> > +
> > + _phy->lane_cnt = phy->attrs.bus_width;
> > + _phy->ufs_phy_state = CFG_PRE_INIT;
> > +
> > + _phy->is_pre_init = true;
> > + _phy->is_post_init = false;
> > + _phy->is_pre_pmc = false;
> > + _phy->is_post_pmc = false;
> > +
> > + samsung_ufs_phy_clks_init(_phy);
> > +
> > + samsung_ufs_phy_calibrate(phy);
> > +
> > + return 0;
> > +}
> > +
> > +static int samsung_ufs_phy_power_on(struct phy *phy) {
> > + struct samsung_ufs_phy *_phy = get_samsung_ufs_phy(phy);
> > + int ret;
> > +
> > + ret = clk_prepare_enable(_phy->ref_clk);
> > + if (ret) {
> > + dev_err(_phy->dev, "%s: ref_clk enable failed %d\n",
> > + __func__, ret);
> > + return ret;
> > + }
> > +
> > + samsung_ufs_phy_ctrl_isol(_phy, false);
> > + return 0;
> > +}
> > +
> > +static int samsung_ufs_phy_power_off(struct phy *phy) {
> > + struct samsung_ufs_phy *_phy = get_samsung_ufs_phy(phy);
> > +
> > + samsung_ufs_phy_ctrl_isol(_phy, true);
> > + clk_disable_unprepare(_phy->ref_clk);
> > + return 0;
> > +}
> > +
> > +static int samsung_ufs_phy_set_mode(struct phy *generic_phy,
> > + enum phy_mode mode, int submode) {
> > + struct samsung_ufs_phy *_phy = get_samsung_ufs_phy(generic_phy);
> > +
> > + _phy->mode = PHY_MODE_INVALID;
> > +
> > + if (mode > 0)
> > + _phy->mode = mode;
> > +
> > + return 0;
> > +}
> > +
> > +static struct phy_ops samsung_ufs_phy_ops = {
> > + .init = samsung_ufs_phy_init,
> > + .power_on = samsung_ufs_phy_power_on,
> > + .power_off = samsung_ufs_phy_power_off,
> > + .calibrate = samsung_ufs_phy_calibrate,
> > + .set_mode = samsung_ufs_phy_set_mode,
> > +}
> > +;
> > +static const struct of_device_id samsung_ufs_phy_match[];
> > +
> > +static int samsung_ufs_phy_probe(struct platform_device *pdev) {
> > + struct device *dev = &pdev->dev;
> > + struct resource *res;
> > + const struct of_device_id *match;
> > + struct samsung_ufs_phy *phy;
> > + struct phy *gen_phy;
> > + struct phy_provider *phy_provider;
> > + const struct samsung_ufs_phy_drvdata *drvdata;
> > + int err = 0;
> > +
> > + match = of_match_node(samsung_ufs_phy_match, dev->of_node);
> > + if (!match) {
> > + err = -EINVAL;
> > + dev_err(dev, "failed to get match_node\n");
> > + goto out;
> > + }
> > +
> > + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
> > + if (!phy) {
> > + err = -ENOMEM;
> > + goto out;
> > + }
> > +
> > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy-
> pma");
> > + phy->reg_pma = devm_ioremap_resource(dev, res);
> > + if (IS_ERR(phy->reg_pma)) {
> > + err = PTR_ERR(phy->reg_pma);
> > + goto out;
> > + }
> > +
> > + phy->reg_pmu = syscon_regmap_lookup_by_phandle(
> > + dev->of_node, "samsung,pmu-syscon");
> > + if (IS_ERR(phy->reg_pmu)) {
> > + err = PTR_ERR(phy->reg_pmu);
> > + dev_err(dev, "failed syscon remap for pmu\n");
> > + goto out;
> > + }
> > +
> > + gen_phy = devm_phy_create(dev, NULL, &samsung_ufs_phy_ops);
> > + if (IS_ERR(gen_phy)) {
> > + err = PTR_ERR(gen_phy);
> > + dev_err(dev, "failed to create PHY for ufs-phy\n");
> > + goto out;
> > + }
> > +
> > + drvdata = match->data;
> > + phy->dev = dev;
> > + phy->drvdata = drvdata;
> > + phy->cfg = (struct samsung_ufs_phy_cfg **)drvdata->cfg;
> > + phy->isol = &drvdata->isol;
> > + phy->lane_cnt = PHY_DEF_LANE_CNT;
> > +
> > + phy_set_drvdata(gen_phy, phy);
> > +
> > + phy_provider = devm_of_phy_provider_register(dev,
> of_phy_simple_xlate);
> > + if (IS_ERR(phy_provider)) {
> > + err = PTR_ERR(phy_provider);
> > + dev_err(dev, "failed to register phy-provider\n");
> > + goto out;
> > + }
> > +out:
> > + return err;
> > +}
> > +
> > +static const struct of_device_id samsung_ufs_phy_match[] = {
> > + {
> > + .compatible = "samsung,exynos7-ufs-phy",
> > + .data = &exynos7_ufs_phy,
> > + },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, samsung_ufs_phy_match);
> > +
> > +static struct platform_driver samsung_ufs_phy_driver = {
> > + .probe = samsung_ufs_phy_probe,
> > + .driver = {
> > + .name = "samsung-ufs-phy",
> > + .of_match_table = samsung_ufs_phy_match,
> > + },
> > +};
> > +module_platform_driver(samsung_ufs_phy_driver);
> > +MODULE_DESCRIPTION("Samsung SoC UFS PHY Driver");
> > +MODULE_AUTHOR("Seungwon Jeon <essuuj@gmail.com>");
> > +MODULE_AUTHOR("Alim Akhtar <alim.akhtar@samsung.com>");
> > +MODULE_LICENSE("GPL v2");
> > diff --git a/drivers/phy/samsung/phy-samsung-ufs.h
> > b/drivers/phy/samsung/phy-samsung-ufs.h
> > new file mode 100644
> > index 000000000000..d0ae2b416b2b
> > --- /dev/null
> > +++ b/drivers/phy/samsung/phy-samsung-ufs.h
> > @@ -0,0 +1,100 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * UFS PHY driver for Samsung EXYNOS SoC
> > + *
> > + * Copyright (C) 2015 Samsung Electronics Co., Ltd.
> > + * Author: Seungwon Jeon <essuuj@gmail.com>
> > + * Author: Alim Akhtar <alim.akhtar@samsung.com>
> > + *
> > + */
> > +#ifndef _PHY_SAMSUNG_UFS_
> > +#define _PHY_SAMSUNG_UFS_
> > +
> > +#define PHY_COMN_BLK 1
> > +#define PHY_TRSV_BLK 2
> > +#define END_UFS_PHY_CFG { 0 }
> > +#define PHY_TRSV_CH_OFFSET 0x30
> > +#define PHY_APB_ADDR(off) ((off) << 2)
> > +
> > +#define PHY_COMN_REG_CFG(o, v, d) { \
> > + .off_0 = PHY_APB_ADDR((o)), \
> > + .off_1 = 0, \
> > + .val = (v), \
> > + .desc = (d), \
> > + .id = PHY_COMN_BLK, \
> > +}
> > +
> > +#define PHY_TRSV_REG_CFG(o, v, d) { \
> > + .off_0 = PHY_APB_ADDR((o)), \
> > + .off_1 = PHY_APB_ADDR((o) + PHY_TRSV_CH_OFFSET), \
> > + .val = (v), \
> > + .desc = (d), \
> > + .id = PHY_TRSV_BLK, \
> > +}
> > +
> > +/* UFS PHY registers */
> > +#define PHY_PLL_LOCK_STATUS 0x1e
> > +#define PHY_CDR_LOCK_STATUS 0x5e
> > +
> > +#define PHY_PLL_LOCK_BIT BIT(5)
> > +#define PHY_CDR_LOCK_BIT BIT(4)
> > +
> > +/* PHY calibration point/state */
> > +enum {
> > + CFG_PRE_INIT,
> > + CFG_POST_INIT,
> > + CFG_PRE_PWR_HS,
> > + CFG_POST_PWR_HS,
> > + CFG_TAG_MAX,
> > +};
> > +
> > +struct samsung_ufs_phy_cfg {
> > + u32 off_0;
> > + u32 off_1;
> > + u32 val;
> > + u8 desc;
> > + u8 id;
> > +};
> > +
> > +struct samsung_ufs_phy_drvdata {
> > + const struct samsung_ufs_phy_cfg **cfg;
> > + struct pmu_isol {
> > + u32 offset;
> > + u32 mask;
> > + u32 en;
> > + } isol;
> > +};
> > +
> > +struct samsung_ufs_phy {
> > + struct device *dev;
> > + void __iomem *reg_pma;
> > + struct regmap *reg_pmu;
> > + struct clk *ref_clk;
> > + struct clk *ref_clk_parent;
> > + const struct samsung_ufs_phy_drvdata *drvdata;
> > + struct samsung_ufs_phy_cfg **cfg;
> > + const struct pmu_isol *isol;
> > + u8 lane_cnt;
> > + int ufs_phy_state;
> > + enum phy_mode mode;
> > + bool is_pre_init;
> > + bool is_post_init;
> > + bool is_pre_pmc;
> > + bool is_post_pmc;
> > +};
> > +
> > +static inline struct samsung_ufs_phy *get_samsung_ufs_phy(struct phy
> > +*phy) {
> > + return (struct samsung_ufs_phy *)phy_get_drvdata(phy); }
> > +
> > +static inline void samsung_ufs_phy_ctrl_isol(
> > + struct samsung_ufs_phy *phy, u32 isol) {
> > + regmap_update_bits(phy->reg_pmu, phy->isol->offset,
> > + phy->isol->mask, isol ? 0 : phy->isol->en); }
> > +
> > +#include "phy-exynos7-ufs.h"
> > +
> > +#endif /* _PHY_SAMSUNG_UFS_ */
> > diff --git a/include/linux/phy/phy-samsung-ufs.h
> > b/include/linux/phy/phy-samsung-ufs.h
> > new file mode 100644
> > index 000000000000..1def56207f5d
> > --- /dev/null
> > +++ b/include/linux/phy/phy-samsung-ufs.h
> > @@ -0,0 +1,70 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * phy-samsung-ufs.h - Header file for the UFS PHY of Samsung SoC
> > + *
> > + * Copyright (C) 2015 Samsung Electronics Co., Ltd.
> > + * Author: Seungwon Jeon <essuuj@gmail.com>
> > + * Author: Alim Akhtar <alim.akhtar@samsung.com>
> > + *
> > + */
> > +
> > +#ifndef _PHY_EXYNOS_UFS_H_
> > +#define _PHY_EXYNOS_UFS_H_
> > +
> > +#include "phy.h"
> > +
> > +/* description for PHY calibration */ enum {
> > + /* applicable to any */
> > + PWR_DESC_ANY = 0,
> > + /* mode */
> > + PWR_DESC_PWM = 1,
> > + PWR_DESC_HS = 2,
> > + /* series */
> > + PWR_DESC_SER_A = 1,
> > + PWR_DESC_SER_B = 2,
> > + /* gear */
> > + PWR_DESC_G1 = 1,
> > + PWR_DESC_G2 = 2,
> > + PWR_DESC_G3 = 3,
> > + PWR_DESC_G4 = 4,
> > + PWR_DESC_G5 = 5,
> > + PWR_DESC_G6 = 6,
> > + PWR_DESC_G7 = 7,
> > + /* field mask */
> > + MD_MASK = 0x3,
> > + SR_MASK = 0x3,
> > + GR_MASK = 0x7,
> > +};
> > +
> > +#define PWR_MODE(g, s, m) ((((g) & GR_MASK) << 4) |\
> > + (((s) & SR_MASK) << 2) | ((m) & MD_MASK))
> > +#define PWR_MODE_HS(g, s) ((((g) & GR_MASK) << 4) |\
> > + (((s) & SR_MASK) << 2) | PWR_DESC_HS)
> > +#define PWR_MODE_HS_G1_ANY PWR_MODE_HS(PWR_DESC_G1,
> PWR_DESC_ANY)
> > +#define PWR_MODE_HS_G1_SER_A PWR_MODE_HS(PWR_DESC_G1,
> PWR_DESC_SER_A)
> > +#define PWR_MODE_HS_G1_SER_B PWR_MODE_HS(PWR_DESC_G1,
> PWR_DESC_SER_B)
> > +#define PWR_MODE_HS_G2_ANY PWR_MODE_HS(PWR_DESC_G2,
> PWR_DESC_ANY)
> > +#define PWR_MODE_HS_G2_SER_A PWR_MODE_HS(PWR_DESC_G2,
> PWR_DESC_SER_A)
> > +#define PWR_MODE_HS_G2_SER_B PWR_MODE_HS(PWR_DESC_G2,
> PWR_DESC_SER_B)
> > +#define PWR_MODE_HS_G3_ANY PWR_MODE_HS(PWR_DESC_G3,
> PWR_DESC_ANY)
> > +#define PWR_MODE_HS_G3_SER_A PWR_MODE_HS(PWR_DESC_G3,
> PWR_DESC_SER_A)
> > +#define PWR_MODE_HS_G3_SER_B PWR_MODE_HS(PWR_DESC_G3,
> PWR_DESC_SER_B)
> > +#define PWR_MODE_HS_ANY
> PWR_MODE(PWR_DESC_ANY,\
> > + PWR_DESC_ANY, PWR_DESC_HS)
> > +#define PWR_MODE_PWM_ANY PWR_MODE(PWR_DESC_ANY,\
> > + PWR_DESC_ANY, PWR_DESC_PWM)
> > +#define PWR_MODE_ANY PWR_MODE(PWR_DESC_ANY,\
> > + PWR_DESC_ANY, PWR_DESC_ANY)
> > +#define IS_PWR_MODE_HS(d) (((d) & MD_MASK) == PWR_DESC_HS)
> > +#define IS_PWR_MODE_PWM(d) (((d) & MD_MASK) ==
> PWR_DESC_PWM)
> > +#define IS_PWR_MODE_ANY(d) ((d) == PWR_MODE_ANY)
> > +#define IS_PWR_MODE_HS_ANY(d) ((d) == PWR_MODE_HS_ANY)
> > +#define COMP_PWR_MODE(a, b) ((a) == (b))
> > +#define COMP_PWR_MODE_GEAR(a, b) ((((a) >> 4) & GR_MASK) == \
> > + (((b) >> 4) & GR_MASK))
> > +#define COMP_PWR_MODE_SER(a, b) ((((a) >> 2) & SR_MASK)
> == \
> > + (((b) >> 2) & SR_MASK))
> > +#define COMP_PWR_MODE_MD(a, b) (((a) & MD_MASK) ==
> ((b) & MD_MASK))
> > +
> > +#endif /* _PHY_EXYNOS_UFS_H_ */
> >

\
 
 \ /
  Last update: 2020-03-20 12:48    [W:0.081 / U:9.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site