lkml.org 
[lkml]   [2020]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: graph connection to node is not bidirectional kernel-5.6.0-rc6
rob,

issue got resolved. the problem was end node of the panel had the label.

- panel2: eppendorf {
+ lvds-out {

https://github.com/vinaysimhabn/kernel-msm/commit/a7bf9ccd0b61cb355fe7fa768e65b6f04cfa686f

thanks.

On Thu, Mar 19, 2020 at 10:46 PM Vinay Simha B N <simhavcs@gmail.com> wrote:
>
> On Thu, Mar 19, 2020 at 10:36 PM Rob Herring <robh@kernel.org> wrote:
> >
> > On Thu, Mar 19, 2020 at 9:56 AM Vinay Simha B N <simhavcs@gmail.com> wrote:
> > >
> > > On Thu, Mar 19, 2020 at 9:16 PM Rob Herring <robh@kernel.org> wrote:
> > > >
> > > > On Thu, Mar 19, 2020 at 1:31 AM Vinay Simha B N <simhavcs@gmail.com> wrote:
> > > > >
> > > > > hi,
> > > > >
> > > > > I am getting the endpoint' is not bidirectional(d2l_in, dsi0_out)
> > > > > warning in compilation, built boot image works on qcom apq8016-ifc6309
> > > > > board with the dsi->bridge->lvds panel.
> > > > > Because of this warning i cannot create a .yaml documentation examples.
> > > > > Please suggest.
> > > > >
> > > > > tc_bridge: bridge@f {
> > > >
> > > > ^^^^^^^^
> > > >
> > > > > arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi:253.28-255.9: Warning
> > > > > (graph_endpoint): /soc/i2c@78b8000/bridge@39/ports/port@0/endpoint:
> > > >
> > > > ^^^^^^^^^
> > > >
> > > > Looks like you have 2 different bridges.
> > > >
> > > i had two bridges, if we disable one bridge also we get the warning
> > >
> > > arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi:333.53-335.35: Warning
> > > (graph_endpoint): /soc/auo,b101xtn01/port/endpoint: graph connection
> > > to node '/soc/i2c@78b8000/bridge@f/ports/port@1/endpoint' is not
> > > bidirectional
> >
> > You can't just disable nodes. To switch which bridge is enabled, you
> > already have to modify remote-endpoint at the other end. So the
> > requirement is you have to modify both 'remote-endpoint' properties
> > (or really all 3).
> >
> > The other options is if you want both connections described, then you
> > need 2 'endpoint' nodes to connect both bridges.
> even after removing one bridge(dsi2hdmi) in the device tree, currently
> using only one bridge(dsi2lvds), i do still get the compilation warning.
>
> graph connection
> to node '/soc/i2c@78b8000/bridge@f/ports/port@1/endpoint' is not
> bidirectional
>
> This compilation warning does not cause any problem with the boot image created
> dsi -> dsi2lvds bridge-> lvds panel . Able to get the display properly.
>
> https://github.com/vinaysimhabn/kernel-msm/blob/08e4821646b5c128559c506a5777d8782f1ff79e/Documentation/devicetree/bindings/display/bridge/toshiba%2Ctc358775.yaml
>
> But while creating documentation yaml, it is not allowing to add this examples.
> --
> regards,
> vinaysimha



--
regards,
vinaysimha

\
 
 \ /
  Last update: 2020-03-20 05:33    [W:1.877 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site