lkml.org 
[lkml]   [2020]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH V3 2/4] mailbox: imx: restructure code to make easy for new MU
Date
Hi Oleksij,

> Subject: Re: [PATCH V3 2/4] mailbox: imx: restructure code to make easy for
> new MU
>
> Hi Peng,
>
> On 26.02.20 05:40, peng.fan@nxp.com wrote:
> > From: Peng Fan <peng.fan@nxp.com>
> >
> > Add imx_mu_generic_tx for data send and imx_mu_generic_rx for
> > interrupt data receive.
> > Add 'type' for MU type.
> >
> > With these, it will be a bit easy to introduce i.MX8/8X SCU type MU
> > dedicated to communicate with SCU.
> >
> > Signed-off-by: Peng Fan <peng.fan@nxp.com>
> > ---
> >
> > V3:
> > New patch, restructure code.
> >
> > drivers/mailbox/imx-mailbox.c | 100
> ++++++++++++++++++++++++++++--------------
> > 1 file changed, 67 insertions(+), 33 deletions(-)
> >
> > diff --git a/drivers/mailbox/imx-mailbox.c
> > b/drivers/mailbox/imx-mailbox.c index 2cdcdc5f1119..901a3431fdb5
> > 100644
> > --- a/drivers/mailbox/imx-mailbox.c
> > +++ b/drivers/mailbox/imx-mailbox.c
> > @@ -36,7 +36,17 @@ enum imx_mu_chan_type {
> > IMX_MU_TYPE_RXDB, /* Rx doorbell */
> > };
> >
> > +enum imx_mu_type {
> > + IMX_MU_TYPE_GENERIC,
> > +};
>
> I assume this enum is not needed, see my next email

This is to just differentiate with SCU MU, ok, will check your next email.
Then back if anything I not follow up.

> > +struct imx_mu_priv;
> > +struct imx_mu_con_priv;
> > +
> > struct imx_mu_dcfg {
> > + enum imx_mu_type type;
> > + int (*tx)(struct imx_mu_priv *priv, struct imx_mu_con_priv *cp, void
> *data);
> > + int (*rx)(struct imx_mu_priv *priv, struct imx_mu_con_priv *cp);
> > u32 xTR[4]; /* Transmit Registers */
> > u32 xRR[4]; /* Receive Registers */
> > u32 xSR; /* Status Register */
> > @@ -67,20 +77,6 @@ struct imx_mu_priv {
> > bool side_b;
> > };
> >
> > -static const struct imx_mu_dcfg imx_mu_cfg_imx6sx = {
> > - .xTR = {0x0, 0x4, 0x8, 0xc},
> > - .xRR = {0x10, 0x14, 0x18, 0x1c},
> > - .xSR = 0x20,
> > - .xCR = 0x24,
> > -};
> > -
> > -static const struct imx_mu_dcfg imx_mu_cfg_imx7ulp = {
> > - .xTR = {0x20, 0x24, 0x28, 0x2c},
> > - .xRR = {0x40, 0x44, 0x48, 0x4c},
> > - .xSR = 0x60,
> > - .xCR = 0x64,
> > -};
>
> Please, do not move it.

Ok. Then I need to add imx_mu_generic_tx prototype above the
upper two.

Thanks,
Peng.

>
> > static struct imx_mu_priv *to_imx_mu_priv(struct mbox_controller
> *mbox)
> > {
> > return container_of(mbox, struct imx_mu_priv, mbox); @@ -111,6
> > +107,40 @@ static u32 imx_mu_xcr_rmw(struct imx_mu_priv *priv, u32 set,
> u32 clr)
> > return val;
> > }
> >
> > +static int imx_mu_generic_tx(struct imx_mu_priv *priv,
> > + struct imx_mu_con_priv *cp,
> > + void *data)
> > +{
> > + u32 *arg = data;
> > +
> > + switch (cp->type) {
> > + case IMX_MU_TYPE_TX:
> > + imx_mu_write(priv, *arg, priv->dcfg->xTR[cp->idx]);
> > + imx_mu_xcr_rmw(priv, IMX_MU_xCR_TIEn(cp->idx), 0);
> > + break;
> > + case IMX_MU_TYPE_TXDB:
> > + imx_mu_xcr_rmw(priv, IMX_MU_xCR_GIRn(cp->idx), 0);
> > + tasklet_schedule(&cp->txdb_tasklet);
> > + break;
> > + default:
> > + dev_warn_ratelimited(priv->dev, "Send data on wrong channel
> type: %d\n", cp->type);
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int imx_mu_generic_rx(struct imx_mu_priv *priv,
> > + struct imx_mu_con_priv *cp)
> > +{
> > + u32 dat;
> > +
> > + dat = imx_mu_read(priv, priv->dcfg->xRR[cp->idx]);
> > + mbox_chan_received_data(cp->chan, (void *)&dat);
> > +
> > + return 0;
> > +}
> > +
> > static void imx_mu_txdb_tasklet(unsigned long data)
> > {
> > struct imx_mu_con_priv *cp = (struct imx_mu_con_priv *)data; @@
> > -123,7 +153,7 @@ static irqreturn_t imx_mu_isr(int irq, void *p)
> > struct mbox_chan *chan = p;
> > struct imx_mu_priv *priv = to_imx_mu_priv(chan->mbox);
> > struct imx_mu_con_priv *cp = chan->con_priv;
> > - u32 val, ctrl, dat;
> > + u32 val, ctrl;
> >
> > ctrl = imx_mu_read(priv, priv->dcfg->xCR);
> > val = imx_mu_read(priv, priv->dcfg->xSR); @@ -152,8 +182,7 @@
> > static irqreturn_t imx_mu_isr(int irq, void *p)
> > imx_mu_xcr_rmw(priv, 0, IMX_MU_xCR_TIEn(cp->idx));
> > mbox_chan_txdone(chan, 0);
> > } else if (val == IMX_MU_xSR_RFn(cp->idx)) {
> > - dat = imx_mu_read(priv, priv->dcfg->xRR[cp->idx]);
> > - mbox_chan_received_data(chan, (void *)&dat);
> > + priv->dcfg->rx(priv, cp);
> > } else if (val == IMX_MU_xSR_GIPn(cp->idx)) {
> > imx_mu_write(priv, IMX_MU_xSR_GIPn(cp->idx),
> priv->dcfg->xSR);
> > mbox_chan_received_data(chan, NULL); @@ -169,23 +198,8
> @@ static
> > int imx_mu_send_data(struct mbox_chan *chan, void *data)
> > {
> > struct imx_mu_priv *priv = to_imx_mu_priv(chan->mbox);
> > struct imx_mu_con_priv *cp = chan->con_priv;
> > - u32 *arg = data;
> > -
> > - switch (cp->type) {
> > - case IMX_MU_TYPE_TX:
> > - imx_mu_write(priv, *arg, priv->dcfg->xTR[cp->idx]);
> > - imx_mu_xcr_rmw(priv, IMX_MU_xCR_TIEn(cp->idx), 0);
> > - break;
> > - case IMX_MU_TYPE_TXDB:
> > - imx_mu_xcr_rmw(priv, IMX_MU_xCR_GIRn(cp->idx), 0);
> > - tasklet_schedule(&cp->txdb_tasklet);
> > - break;
> > - default:
> > - dev_warn_ratelimited(priv->dev, "Send data on wrong channel
> type: %d\n", cp->type);
> > - return -EINVAL;
> > - }
> >
> > - return 0;
> > + return priv->dcfg->tx(priv, cp, data);
> > }
> >
> > static int imx_mu_startup(struct mbox_chan *chan) @@ -367,6 +381,26
> > @@ static int imx_mu_remove(struct platform_device *pdev)
> > return 0;
> > }
> >
> > +static const struct imx_mu_dcfg imx_mu_cfg_imx6sx = {
> > + .type = IMX_MU_TYPE_GENERIC,
> > + .tx = imx_mu_generic_tx,
> > + .rx = imx_mu_generic_rx,
> > + .xTR = {0x0, 0x4, 0x8, 0xc},
> > + .xRR = {0x10, 0x14, 0x18, 0x1c},
> > + .xSR = 0x20,
> > + .xCR = 0x24,
> > +};
> > +
> > +static const struct imx_mu_dcfg imx_mu_cfg_imx7ulp = {
> > + .type = IMX_MU_TYPE_GENERIC,
> > + .tx = imx_mu_generic_tx,
> > + .rx = imx_mu_generic_rx,
> > + .xTR = {0x20, 0x24, 0x28, 0x2c},
> > + .xRR = {0x40, 0x44, 0x48, 0x4c},
> > + .xSR = 0x60,
> > + .xCR = 0x64,
> > +};
> > +
> > static const struct of_device_id imx_mu_dt_ids[] = {
> > { .compatible = "fsl,imx7ulp-mu", .data = &imx_mu_cfg_imx7ulp },
> > { .compatible = "fsl,imx6sx-mu", .data = &imx_mu_cfg_imx6sx },
> >
>
> Kind regards,
> Oleksij Rempel
>
> --
> Pengutronix e.K. |
> |
> Industrial Linux Solutions |
> https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.p
> engutronix.de%2F&amp;data=02%7C01%7Cpeng.fan%40nxp.com%7Ccf660c
> 3909e14128e65f08d7be898905%7C686ea1d3bc2b4c6fa92cd99c5c301635%
> 7C0%7C0%7C637187370224967554&amp;sdata=ZdgIGuzpnhX1liQO4KmCtXx
> jjg%2BnDJoPze4pfVXIAig%3D&amp;reserved=0 |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0
> |
> Amtsgericht Hildesheim, HRA 2686 | Fax:
> +49-5121-206917-5555 |
\
 
 \ /
  Last update: 2020-03-02 10:59    [W:0.072 / U:1.940 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site