lkml.org 
[lkml]   [2020]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 14/42] docs: scsi: convert dpti.txt to ReST
Date
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/scsi/dpti.rst | 92 +++++++++++++++++++++++++++++++++++
Documentation/scsi/dpti.txt | 83 -------------------------------
Documentation/scsi/index.rst | 1 +
drivers/scsi/Kconfig | 2 +-
drivers/scsi/dpt/dpti_ioctl.h | 2 +-
drivers/scsi/dpt_i2o.c | 2 +-
drivers/scsi/dpti.h | 2 +-
7 files changed, 97 insertions(+), 87 deletions(-)
create mode 100644 Documentation/scsi/dpti.rst
delete mode 100644 Documentation/scsi/dpti.txt

diff --git a/Documentation/scsi/dpti.rst b/Documentation/scsi/dpti.rst
new file mode 100644
index 000000000000..0496919d87d3
--- /dev/null
+++ b/Documentation/scsi/dpti.rst
@@ -0,0 +1,92 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================
+Adaptec dpti driver
+===================
+
+Redistribution and use in source form, with or without modification, are
+permitted provided that redistributions of source code must retain the
+above copyright notice, this list of conditions and the following disclaimer.
+
+This software is provided ``as is`` by Adaptec and
+any express or implied warranties, including, but not limited to, the
+implied warranties of merchantability and fitness for a particular purpose,
+are disclaimed. In no event shall Adaptec be
+liable for any direct, indirect, incidental, special, exemplary or
+consequential damages (including, but not limited to, procurement of
+substitute goods or services; loss of use, data, or profits; or business
+interruptions) however caused and on any theory of liability, whether in
+contract, strict liability, or tort (including negligence or otherwise)
+arising in any way out of the use of this driver software, even if advised
+of the possibility of such damage.
+
+This driver supports the Adaptec I2O RAID and DPT SmartRAID V I2O boards.
+
+Credits
+=======
+
+The original linux driver was ported to Linux by Karen White while at
+Dell Computer. It was ported from Bob Pasteur's (of DPT) original
+non-Linux driver. Mark Salyzyn and Bob Pasteur consulted on the original
+driver.
+
+2.0 version of the driver by Deanna Bonds and Mark Salyzyn.
+
+History
+=======
+
+The driver was originally ported to linux version 2.0.34
+
+==== ==========================================================================
+V2.0 Rewrite of driver. Re-architectured based on i2o subsystem.
+ This was the first full GPL version since the last version used
+ i2osig headers which were not GPL. Developer Testing version.
+V2.1 Internal testing
+V2.2 First released version
+
+V2.3 Changes:
+
+ - Added Raptor Support
+ - Fixed bug causing system to hang under extreme load with
+ - management utilities running (removed GFP_DMA from kmalloc flags)
+
+V2.4 First version ready to be submitted to be embedded in the kernel
+
+ Changes:
+
+ - Implemented suggestions from Alan Cox
+ - Added calculation of resid for sg layer
+ - Better error handling
+ - Added checking underflow conditions
+ - Added DATAPROTECT checking
+ - Changed error return codes
+ - Fixed pointer bug in bus reset routine
+ - Enabled hba reset from ioctls (allows a FW flash to reboot and use
+ the new FW without having to reboot)
+ - Changed proc output
+==== ==========================================================================
+
+TODO
+====
+- Add 64 bit Scatter Gather when compiled on 64 bit architectures
+- Add sparse lun scanning
+- Add code that checks if a device that had been taken offline is
+ now online (at the FW level) when test unit ready or inquiry
+ command from scsi-core
+- Add proc read interface
+- busrescan command
+- rescan command
+- Add code to rescan routine that notifies scsi-core about new devices
+- Add support for C-PCI (hotplug stuff)
+- Add ioctl passthru error recovery
+
+Notes
+=====
+The DPT card optimizes the order of processing commands. Consequently,
+a command may take up to 6 minutes to complete after it has been sent
+to the board.
+
+The files dpti_ioctl.h dptsig.h osd_defs.h osd_util.h sys_info.h are part of the
+interface files for Adaptec's management routines. These define the structures used
+in the ioctls. They are written to be portable. They are hard to read, but I need
+to use them 'as is' or I can miss changes in the interface.
diff --git a/Documentation/scsi/dpti.txt b/Documentation/scsi/dpti.txt
deleted file mode 100644
index f36dc0e7c8da..000000000000
--- a/Documentation/scsi/dpti.txt
+++ /dev/null
@@ -1,83 +0,0 @@
- /* TERMS AND CONDITIONS OF USE
- *
- * Redistribution and use in source form, with or without modification, are
- * permitted provided that redistributions of source code must retain the
- * above copyright notice, this list of conditions and the following disclaimer.
- *
- * This software is provided `as is' by Adaptec and
- * any express or implied warranties, including, but not limited to, the
- * implied warranties of merchantability and fitness for a particular purpose,
- * are disclaimed. In no event shall Adaptec be
- * liable for any direct, indirect, incidental, special, exemplary or
- * consequential damages (including, but not limited to, procurement of
- * substitute goods or services; loss of use, data, or profits; or business
- * interruptions) however caused and on any theory of liability, whether in
- * contract, strict liability, or tort (including negligence or otherwise)
- * arising in any way out of the use of this driver software, even if advised
- * of the possibility of such damage.
- *
- ****************************************************************
- * This driver supports the Adaptec I2O RAID and DPT SmartRAID V I2O boards.
- *
- * CREDITS:
- * The original linux driver was ported to Linux by Karen White while at
- * Dell Computer. It was ported from Bob Pasteur's (of DPT) original
- * non-Linux driver. Mark Salyzyn and Bob Pasteur consulted on the original
- * driver.
- *
- * 2.0 version of the driver by Deanna Bonds and Mark Salyzyn.
- *
- * HISTORY:
- * The driver was originally ported to linux version 2.0.34
- *
- * V2.0 Rewrite of driver. Re-architectured based on i2o subsystem.
- * This was the first full GPL version since the last version used
- * i2osig headers which were not GPL. Developer Testing version.
- * V2.1 Internal testing
- * V2.2 First released version
- *
- * V2.3
- * Changes:
- * Added Raptor Support
- * Fixed bug causing system to hang under extreme load with
- * management utilities running (removed GFP_DMA from kmalloc flags)
- *
- *
- * V2.4 First version ready to be submitted to be embedded in the kernel
- * Changes:
- * Implemented suggestions from Alan Cox
- * Added calculation of resid for sg layer
- * Better error handling
- * Added checking underflow conditions
- * Added DATAPROTECT checking
- * Changed error return codes
- * Fixed pointer bug in bus reset routine
- * Enabled hba reset from ioctls (allows a FW flash to reboot and use the new
- * FW without having to reboot)
- * Changed proc output
- *
- * TODO:
- * Add 64 bit Scatter Gather when compiled on 64 bit architectures
- * Add sparse lun scanning
- * Add code that checks if a device that had been taken offline is
- * now online (at the FW level) when test unit ready or inquiry
- * command from scsi-core
- * Add proc read interface
- * busrescan command
- * rescan command
- * Add code to rescan routine that notifies scsi-core about new devices
- * Add support for C-PCI (hotplug stuff)
- * Add ioctl passthru error recovery
- *
- * NOTES:
- * The DPT card optimizes the order of processing commands. Consequently,
- * a command may take up to 6 minutes to complete after it has been sent
- * to the board.
- *
- * The files dpti_ioctl.h dptsig.h osd_defs.h osd_util.h sys_info.h are part of the
- * interface files for Adaptec's management routines. These define the structures used
- * in the ioctls. They are written to be portable. They are hard to read, but I need
- * to use them 'as is' or I can miss changes in the interface.
- *
- */
-
diff --git a/Documentation/scsi/index.rst b/Documentation/scsi/index.rst
index 6fe00709cbce..b553dd9904bf 100644
--- a/Documentation/scsi/index.rst
+++ b/Documentation/scsi/index.rst
@@ -18,5 +18,6 @@ Linux SCSI Subsystem
BusLogic
cxgb3i
dc395x
+ dpti

scsi_transport_srp/figures
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 9f5b2ddec6e0..5e834fba7934 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -448,7 +448,7 @@ config SCSI_DPT_I2O
help
This driver supports all of Adaptec's I2O based RAID controllers as
well as the DPT SmartRaid V cards. This is an Adaptec maintained
- driver by Deanna Bonds. See <file:Documentation/scsi/dpti.txt>.
+ driver by Deanna Bonds. See <file:Documentation/scsi/dpti.rst>.

To compile this driver as a module, choose M here: the
module will be called dpt_i2o.
diff --git a/drivers/scsi/dpt/dpti_ioctl.h b/drivers/scsi/dpt/dpti_ioctl.h
index 6bc33f4f020d..25e9251f8c78 100644
--- a/drivers/scsi/dpt/dpti_ioctl.h
+++ b/drivers/scsi/dpt/dpti_ioctl.h
@@ -5,7 +5,7 @@
begin : Thu Sep 7 2000
copyright : (C) 2001 by Adaptec

- See Documentation/scsi/dpti.txt for history, notes, license info
+ See Documentation/scsi/dpti.rst for history, notes, license info
and credits
***************************************************************************/

diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index abc74fd474dc..5362fb0b96a7 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -8,7 +8,7 @@
July 30, 2001 First version being submitted
for inclusion in the kernel. V2.4

- See Documentation/scsi/dpti.txt for history, notes, license info
+ See Documentation/scsi/dpti.rst for history, notes, license info
and credits
***************************************************************************/

diff --git a/drivers/scsi/dpti.h b/drivers/scsi/dpti.h
index 42b1e28b5884..6da9ab1fcfe8 100644
--- a/drivers/scsi/dpti.h
+++ b/drivers/scsi/dpti.h
@@ -5,7 +5,7 @@
begin : Thu Sep 7 2000
copyright : (C) 2001 by Adaptec

- See Documentation/scsi/dpti.txt for history, notes, license info
+ See Documentation/scsi/dpti.rst for history, notes, license info
and credits
***************************************************************************/

--
2.21.1
\
 
 \ /
  Last update: 2020-03-02 09:20    [W:0.335 / U:2.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site