lkml.org 
[lkml]   [2020]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 08/42] docs: scsi: convert aic7xxx.txt to ReST
Date
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../scsi/{aic7xxx.txt => aic7xxx.rst} | 446 ++++++++++--------
Documentation/scsi/index.rst | 1 +
Documentation/scsi/scsi-parameters.txt | 2 +-
drivers/scsi/aic7xxx/Kconfig.aic7xxx | 2 +-
4 files changed, 258 insertions(+), 193 deletions(-)
rename Documentation/scsi/{aic7xxx.txt => aic7xxx.rst} (49%)

diff --git a/Documentation/scsi/aic7xxx.txt b/Documentation/scsi/aic7xxx.rst
similarity index 49%
rename from Documentation/scsi/aic7xxx.txt
rename to Documentation/scsi/aic7xxx.rst
index 7c5d0223d444..bad0e5567b21 100644
--- a/Documentation/scsi/aic7xxx.txt
+++ b/Documentation/scsi/aic7xxx.rst
@@ -1,8 +1,11 @@
-====================================================================
-= Adaptec Aic7xxx Fast -> Ultra160 Family Manager Set v7.0 =
-= README for =
-= The Linux Operating System =
-====================================================================
+.. SPDX-License-Identifier: GPL-2.0
+.. include:: <isonum.txt>
+
+========================================================
+Adaptec Aic7xxx Fast -> Ultra160 Family Manager Set v7.0
+========================================================
+
+README for The Linux Operating System

The following information is available in this file:

@@ -12,13 +15,15 @@ The following information is available in this file:
4. Contacting Adaptec

1. Supported Hardware
+=====================

The following Adaptec SCSI Chips and Host Adapters are supported by
- the aic7xxx driver.
+ the aic7xxx driver.

- Chip MIPS Host Bus MaxSync MaxWidth SCBs Notes
- ---------------------------------------------------------------
- aic7770 10 EISA/VL 10MHz 16Bit 4 1
+ ======== ===== ========= ======== ========= ===== ===============
+ Chip MIPS Host Bus MaxSync MaxWidth SCBs Notes
+ ======== ===== ========= ======== ========= ===== ===============
+ aic7770 10 EISA/VL 10MHz 16Bit 4 1
aic7850 10 PCI/32 10MHz 8Bit 3
aic7855 10 PCI/32 10MHz 8Bit 3
aic7856 10 PCI/32 10MHz 8Bit 3
@@ -28,12 +33,13 @@ The following information is available in this file:
aic7880 10 PCI/32 20MHz 16Bit 16
aic7890 20 PCI/32 40MHz 16Bit 16 3 4 5 6 7 8
aic7891 20 PCI/64 40MHz 16Bit 16 3 4 5 6 7 8
- aic7892 20 PCI/64-66 80MHz 16Bit 16 3 4 5 6 7 8
+ aic7892 20 PCI/64-66 80MHz 16Bit 16 3 4 5 6 7 8
aic7895 15 PCI/32 20MHz 16Bit 16 2 3 4 5
aic7895C 15 PCI/32 20MHz 16Bit 16 2 3 4 5 8
aic7896 20 PCI/32 40MHz 16Bit 16 2 3 4 5 6 7 8
aic7897 20 PCI/64 40MHz 16Bit 16 2 3 4 5 6 7 8
- aic7899 20 PCI/64-66 80MHz 16Bit 16 2 3 4 5 6 7 8
+ aic7899 20 PCI/64-66 80MHz 16Bit 16 2 3 4 5 6 7 8
+ ======== ===== ========= ======== ========= ===== ===============

1. Multiplexed Twin Channel Device - One controller servicing two
busses.
@@ -44,15 +50,16 @@ The following information is available in this file:
for all possible target/lun combinations.
5. Block Move Instruction Support - Doubles the speed of certain
sequencer operations.
- 6. `Bayonet' style Scatter Gather Engine - Improves S/G prefetch
+ 6. 'Bayonet' style Scatter Gather Engine - Improves S/G prefetch
performance.
7. Queuing Registers - Allows queuing of new transactions without
pausing the sequencer.
8. Multiple Target IDs - Allows the controller to respond to selection
as a target on multiple SCSI IDs.

+ ============== ======= =========== =============== =============== =========
Controller Chip Host-Bus Int-Connectors Ext-Connectors Notes
- --------------------------------------------------------------------------
+ ============== ======= =========== =============== =============== =========
AHA-274X[A] aic7770 EISA SE-50M SE-HD50F
AHA-274X[A]W aic7770 EISA SE-HD68F SE-HD68F
SE-50M
@@ -73,7 +80,7 @@ The following information is available in this file:
AHA-2915C aic7860 PCI/32 SE-50M
AHA-2940AU/CN aic7860 PCI/32 SE-50M SE-HD50F
AHA-2944W aic7870 PCI/32 HVD-HD68F HVD-HD68F
- HVD-50M
+ HVD-50M
AHA-3940W aic7870 PCI/32 2 X SE-HD68F SE-HD68F 2
AHA-2940UW aic7880 PCI/32 SE-HD68F
SE-50M SE-HD68F
@@ -85,12 +92,12 @@ The following information is available in this file:
AHA-3940UWD aic7880 PCI/32 2 X SE-HD68F 2 X SE-VHD68F 3
AHA-3940U aic7880 PCI/32 2 X SE-50M SE-HD50F 3
AHA-2944UW aic7880 PCI/32 HVD-HD68F HVD-HD68F
- HVD-50M
+ HVD-50M
AHA-3944UWD aic7880 PCI/32 2 X HVD-HD68F 2 X HVD-VHD68F 3
AHA-4944UW aic7880 PCI/32
AHA-2930UW aic7880 PCI/32
AHA-2940UW Pro aic7880 PCI/32 SE-HD68F SE-HD68F 4
- SE-50M
+ SE-50M
AHA-2940UW/CN aic7880 PCI/32
AHA-2940UDual aic7895 PCI/32
AHA-2940UWDual aic7895 PCI/32
@@ -102,27 +109,28 @@ The following information is available in this file:
AHA-2940U2B aic7890 PCI/32 LVD-HD68F LVD-HD68F
AHA-2940U2 OEM aic7891 PCI/64
AHA-2940U2W aic7890 PCI/32 LVD-HD68F LVD-HD68F
- SE-HD68F
- SE-50M
+ SE-HD68F
+ SE-50M
AHA-2950U2B aic7891 PCI/64 LVD-HD68F LVD-HD68F
AHA-2930U2 aic7890 PCI/32 LVD-HD68F SE-HD50F
- SE-50M
+ SE-50M
AHA-3950U2B aic7897 PCI/64
AHA-3950U2D aic7897 PCI/64
AHA-29160 aic7892 PCI/64-66
AHA-29160 CPQ aic7892 PCI/64-66
AHA-29160N aic7892 PCI/32 LVD-HD68F SE-HD50F
- SE-50M
+ SE-50M
AHA-29160LP aic7892 PCI/64-66
AHA-19160 aic7892 PCI/64-66
AHA-29150LP aic7892 PCI/64-66
AHA-29130LP aic7892 PCI/64-66
AHA-3960D aic7899 PCI/64-66 2 X LVD-HD68F 2 X LVD-VHD68F
- LVD-50M
+ LVD-50M
AHA-3960D CPQ aic7899 PCI/64-66 2 X LVD-HD68F 2 X LVD-VHD68F
- LVD-50M
+ LVD-50M
AHA-39160 aic7899 PCI/64-66 2 X LVD-HD68F 2 X LVD-VHD68F
- LVD-50M
+ LVD-50M
+ ============== ======= =========== =============== =============== =========

1. No BIOS support
2. DEC21050 PCI-PCI bridge with multiple controller chips on secondary bus
@@ -131,11 +139,14 @@ The following information is available in this file:
SCSI "stub" effects.

2. Version History
- 7.0 (4th August, 2005)
+==================
+
+ * 7.0 (4th August, 2005)
- Updated driver to use SCSI transport class infrastructure
- Upported sequencer and core fixes from last adaptec released
version of the driver.
- 6.2.36 (June 3rd, 2003)
+
+ * 6.2.36 (June 3rd, 2003)
- Correct code that disables PCI parity error checking.
- Correct and simplify handling of the ignore wide residue
message. The previous code would fail to report a residual
@@ -153,18 +164,18 @@ The following information is available in this file:
by some other driver probe that occurred before we
claimed the controller.

- 6.2.35 (May 14th, 2003)
+ * 6.2.35 (May 14th, 2003)
- Fix a few GCC 3.3 compiler warnings.
- Correct operation on EISA Twin Channel controller.
- Add support for 2.5.X's scsi_report_device_reset().

- 6.2.34 (May 5th, 2003)
+ * 6.2.34 (May 5th, 2003)
- Fix locking regression introduced in 6.2.29 that
could cause a lock order reversal between the io_request_lock
and our per-softc lock. This was only possible on RH9,
SuSE, and kernel.org 2.4.X kernels.

- 6.2.33 (April 30th, 2003)
+ * 6.2.33 (April 30th, 2003)
- Dynamically disable PCI parity error reporting after
10 errors are reported to the user. These errors are
the result of some other device issuing PCI transactions
@@ -172,172 +183,224 @@ The following information is available in this file:
problem, continuing to report the errors just degrades
our performance.

- 6.2.32 (March 28th, 2003)
+ * 6.2.32 (March 28th, 2003)
- Dynamically sized S/G lists to avoid SCSI malloc
pool fragmentation and SCSI mid-layer deadlock.

- 6.2.28 (January 20th, 2003)
+ * 6.2.28 (January 20th, 2003)
- Domain Validation Fixes
- Add ability to disable PCI parity error checking.
- Enhanced Memory Mapped I/O probe

- 6.2.20 (November 7th, 2002)
+ * 6.2.20 (November 7th, 2002)
- Added Domain Validation.

3. Command Line Options
+=======================

- WARNING: ALTERING OR ADDING THESE DRIVER PARAMETERS
+
+ .. Warning::
+
+ ALTERING OR ADDING THESE DRIVER PARAMETERS
INCORRECTLY CAN RENDER YOUR SYSTEM INOPERABLE.
- USE THEM WITH CAUTION.
+ USE THEM WITH CAUTION.

Put a .conf file in the /etc/modprobe.d directory and add/edit a
- line containing 'options aic7xxx aic7xxx=[command[,command...]]' where
- 'command' is one or more of the following:
- -----------------------------------------------------------------
- Option: verbose
- Definition: enable additional informative messages during
- driver operation.
- Possible Values: This option is a flag
- Default Value: disabled
- -----------------------------------------------------------------
- Option: debug:[value]
- Definition: Enables various levels of debugging information
- Possible Values: 0x0000 = no debugging, 0xffff = full debugging
- Default Value: 0x0000
- -----------------------------------------------------------------
- Option: no_probe
- Option: probe_eisa_vl
- Definition: Do not probe for EISA/VLB controllers.
- This is a toggle. If the driver is compiled
- to not probe EISA/VLB controllers by default,
- specifying "no_probe" will enable this probing.
- If the driver is compiled to probe EISA/VLB
- controllers by default, specifying "no_probe"
- will disable this probing.
- Possible Values: This option is a toggle
- Default Value: EISA/VLB probing is disabled by default.
- -----------------------------------------------------------------
- Option: pci_parity
- Definition: Toggles the detection of PCI parity errors.
- On many motherboards with VIA chipsets,
- PCI parity is not generated correctly on the
- PCI bus. It is impossible for the hardware to
- differentiate between these "spurious" parity
- errors and real parity errors. The symptom of
- this problem is a stream of the message:
- "scsi0: Data Parity Error Detected during address or write data phase"
- output by the driver.
- Possible Values: This option is a toggle
- Default Value: PCI Parity Error reporting is disabled
- -----------------------------------------------------------------
- Option: no_reset
- Definition: Do not reset the bus during the initial probe
- phase
- Possible Values: This option is a flag
- Default Value: disabled
- -----------------------------------------------------------------
- Option: extended
- Definition: Force extended translation on the controller
- Possible Values: This option is a flag
- Default Value: disabled
- -----------------------------------------------------------------
- Option: periodic_otag
- Definition: Send an ordered tag periodically to prevent
- tag starvation. Needed for some older devices
- Possible Values: This option is a flag
- Default Value: disabled
- -----------------------------------------------------------------
- Option: reverse_scan
- Definition: Probe the scsi bus in reverse order, starting
- with target 15
- Possible Values: This option is a flag
- Default Value: disabled
- -----------------------------------------------------------------
- Option: global_tag_depth:[value]
- Definition: Global tag depth for all targets on all busses.
- This option sets the default tag depth which
- may be selectively overridden vi the tag_info
- option.
- Possible Values: 1 - 253
- Default Value: 32
- -----------------------------------------------------------------
- Option: tag_info:{{value[,value...]}[,{value[,value...]}...]}
- Definition: Set the per-target tagged queue depth on a
- per controller basis. Both controllers and targets
- may be omitted indicating that they should retain
- the default tag depth.
- Examples: tag_info:{{16,32,32,64,8,8,,32,32,32,32,32,32,32,32,32}
- On Controller 0
- specifies a tag depth of 16 for target 0
- specifies a tag depth of 64 for target 3
- specifies a tag depth of 8 for targets 4 and 5
- leaves target 6 at the default
- specifies a tag depth of 32 for targets 1,2,7-15
- All other targets retain the default depth.
-
- tag_info:{{},{32,,32}}
- On Controller 1
- specifies a tag depth of 32 for targets 0 and 2
- All other targets retain the default depth.
-
- Possible Values: 1 - 253
- Default Value: 32
- -----------------------------------------------------------------
- Option: seltime:[value]
- Definition: Specifies the selection timeout value
- Possible Values: 0 = 256ms, 1 = 128ms, 2 = 64ms, 3 = 32ms
- Default Value: 0
- -----------------------------------------------------------------
- Option: dv: {value[,value...]}
- Definition: Set Domain Validation Policy on a per-controller basis.
- Controllers may be omitted indicating that
- they should retain the default read streaming setting.
- Example: dv:{-1,0,,1,1,0}
- On Controller 0 leave DV at its default setting.
- On Controller 1 disable DV.
- Skip configuration on Controller 2.
- On Controllers 3 and 4 enable DV.
- On Controller 5 disable DV.
-
- Possible Values: < 0 Use setting from serial EEPROM.
- 0 Disable DV
- > 0 Enable DV
-
- Default Value: SCSI-Select setting on controllers with a SCSI Select
- option for DV. Otherwise, on for controllers supporting
- U160 speeds and off for all other controller types.
- -----------------------------------------------------------------
-
- Example:
- 'options aic7xxx aic7xxx=verbose,no_probe,tag_info:{{},{,,10}},seltime:1'
- enables verbose logging, Disable EISA/VLB probing,
- and set tag depth on Controller 1/Target 2 to 10 tags.
+ line containing ``options aic7xxx aic7xxx=[command[,command...]]`` where
+ ``command`` is one or more of the following:
+
+verbose
+
+ :Definition: enable additional informative messages during driver operation.
+ :Possible Values: This option is a flag
+ :Default Value: disabled
+
+
+debug:[value]
+
+ :Definition: Enables various levels of debugging information
+ :Possible Values: 0x0000 = no debugging, 0xffff = full debugging
+ :Default Value: 0x0000
+
+no_probe
+
+probe_eisa_vl
+
+ :Definition: Do not probe for EISA/VLB controllers.
+ This is a toggle. If the driver is compiled
+ to not probe EISA/VLB controllers by default,
+ specifying "no_probe" will enable this probing.
+ If the driver is compiled to probe EISA/VLB
+ controllers by default, specifying "no_probe"
+ will disable this probing.
+
+ :Possible Values: This option is a toggle
+ :Default Value: EISA/VLB probing is disabled by default.
+
+pci_parity
+
+ :Definition: Toggles the detection of PCI parity errors.
+ On many motherboards with VIA chipsets,
+ PCI parity is not generated correctly on the
+ PCI bus. It is impossible for the hardware to
+ differentiate between these "spurious" parity
+ errors and real parity errors. The symptom of
+ this problem is a stream of the message::
+
+ "scsi0: Data Parity Error Detected during address or write data phase"
+
+ output by the driver.
+
+ :Possible Values: This option is a toggle
+ :Default Value: PCI Parity Error reporting is disabled
+
+no_reset
+
+ :Definition: Do not reset the bus during the initial probe
+ phase
+
+ :Possible Values: This option is a flag
+ :Default Value: disabled
+
+extended
+
+ :Definition: Force extended translation on the controller
+ :Possible Values: This option is a flag
+ :Default Value: disabled
+
+periodic_otag
+
+ :Definition: Send an ordered tag periodically to prevent
+ tag starvation. Needed for some older devices
+
+ :Possible Values: This option is a flag
+ :Default Value: disabled
+
+reverse_scan
+
+ :Definition: Probe the scsi bus in reverse order, starting
+ with target 15
+
+ :Possible Values: This option is a flag
+ :Default Value: disabled
+
+global_tag_depth:[value]
+
+ :Definition: Global tag depth for all targets on all busses.
+ This option sets the default tag depth which
+ may be selectively overridden vi the tag_info
+ option.
+
+ :Possible Values: 1 - 253
+ :Default Value: 32
+
+tag_info:{{value[,value...]}[,{value[,value...]}...]}
+
+ :Definition: Set the per-target tagged queue depth on a
+ per controller basis. Both controllers and targets
+ may be omitted indicating that they should retain
+ the default tag depth.
+
+ :Possible Values: 1 - 253
+ :Default Value: 32
+
+ Examples:
+
+ ::
+
+ tag_info:{{16,32,32,64,8,8,,32,32,32,32,32,32,32,32,32}
+
+ On Controller 0:
+
+ - specifies a tag depth of 16 for target 0
+ - specifies a tag depth of 64 for target 3
+ - specifies a tag depth of 8 for targets 4 and 5
+ - leaves target 6 at the default
+ - specifies a tag depth of 32 for targets 1,2,7-15
+ - All other targets retain the default depth.
+
+ ::
+
+ tag_info:{{},{32,,32}}
+
+ On Controller 1:
+
+ - specifies a tag depth of 32 for targets 0 and 2
+ - All other targets retain the default depth.
+
+seltime:[value]
+
+ :Definition: Specifies the selection timeout value
+ :Possible Values: 0 = 256ms, 1 = 128ms, 2 = 64ms, 3 = 32ms
+ :Default Value: 0
+
+dv: {value[,value...]}
+
+ :Definition: Set Domain Validation Policy on a per-controller basis.
+ Controllers may be omitted indicating that
+ they should retain the default read streaming setting.
+
+ :Possible Values:
+
+ ==== ===============================
+ < 0 Use setting from serial EEPROM.
+ 0 Disable DV
+ > 0 Enable DV
+ ==== ===============================
+
+
+ :Default Value: SCSI-Select setting on controllers with a SCSI Select
+ option for DV. Otherwise, on for controllers supporting
+ U160 speeds and off for all other controller types.
+
+ Example:
+
+ ::
+
+ dv:{-1,0,,1,1,0}
+
+ - On Controller 0 leave DV at its default setting.
+ - On Controller 1 disable DV.
+ - Skip configuration on Controller 2.
+ - On Controllers 3 and 4 enable DV.
+ - On Controller 5 disable DV.
+
+Example::
+
+ options aic7xxx aic7xxx=verbose,no_probe,tag_info:{{},{,,10}},seltime:1
+
+enables verbose logging, Disable EISA/VLB probing,
+and set tag depth on Controller 1/Target 2 to 10 tags.

4. Adaptec Customer Support
+===========================

- A Technical Support Identification (TSID) Number is required for
+ A Technical Support Identification (TSID) Number is required for
Adaptec technical support.
+
- The 12-digit TSID can be found on the white barcode-type label
- included inside the box with your product. The TSID helps us
- provide more efficient service by accurately identifying your
+ included inside the box with your product. The TSID helps us
+ provide more efficient service by accurately identifying your
product and support status.

Support Options
- Search the Adaptec Support Knowledgebase (ASK) at
http://ask.adaptec.com for articles, troubleshooting tips, and
frequently asked questions about your product.
- - For support via Email, submit your question to Adaptec's
+ - For support via Email, submit your question to Adaptec's
Technical Support Specialists at http://ask.adaptec.com/.
-
+
North America
- Visit our Web site at http://www.adaptec.com/.
- For information about Adaptec's support options, call
408-957-2550, 24 hours a day, 7 days a week.
- To speak with a Technical Support Specialist,
+
* For hardware products, call 408-934-7274,
Monday to Friday, 3:00 am to 5:00 pm, PDT.
* For RAID and Fibre Channel products, call 321-207-2000,
Monday to Friday, 3:00 am to 5:00 pm, PDT.
+
To expedite your service, have your computer with you.
- To order Adaptec products, including accessories and cables,
call 408-957-7274. To order cables online go to
@@ -346,49 +409,50 @@ The following information is available in this file:
Europe
- Visit our Web site at http://www.adaptec.com/en-US/_common/world_index.
- To speak with a Technical Support Specialist, call, or email,
+
* German: +49 89 4366 5522, Monday-Friday, 9:00-17:00 CET,
http://ask-de.adaptec.com/.
* French: +49 89 4366 5533, Monday-Friday, 9:00-17:00 CET,
http://ask-fr.adaptec.com/.
* English: +49 89 4366 5544, Monday-Friday, 9:00-17:00 GMT,
http://ask.adaptec.com/.
+
- You can order Adaptec cables online at
http://www.adaptec.com/buy-cables/.

Japan
- Visit our web site at http://www.adaptec.co.jp/.
- - To speak with a Technical Support Specialist, call
+ - To speak with a Technical Support Specialist, call
+81 3 5308 6120, Monday-Friday, 9:00 a.m. to 12:00 p.m.,
1:00 p.m. to 6:00 p.m.

--------------------------------------------------------------------
-/*
- * Copyright (c) 2003 Adaptec Inc. 691 S. Milpitas Blvd., Milpitas CA 95035 USA.
- * All rights reserved.
- *
- * You are permitted to redistribute, use and modify this README file in whole
- * or in part in conjunction with redistribution of software governed by the
- * General Public License, provided that the following conditions are met:
- * 1. Redistributions of README file must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- * 3. Modifications or new contributions must be attributed in a copyright
- * notice identifying the author ("Contributor") and added below the
- * original copyright notice. The copyright notice is for purposes of
- * identifying contributors and should not be deemed as permission to alter
- * the permissions given by Adaptec.
- *
- * THIS README FILE IS PROVIDED BY ADAPTEC AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY
- * WARRANTIES OF NON-INFRINGEMENT OR THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
- * ADAPTEC OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
- * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS README
- * FILE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
+Copyright |copy| 2003 Adaptec Inc. 691 S. Milpitas Blvd., Milpitas CA 95035 USA.
+
+All rights reserved.
+
+You are permitted to redistribute, use and modify this README file in whole
+or in part in conjunction with redistribution of software governed by the
+General Public License, provided that the following conditions are met:
+
+1. Redistributions of README file must retain the above copyright
+ notice, this list of conditions, and the following disclaimer,
+ without modification.
+2. The name of the author may not be used to endorse or promote products
+ derived from this software without specific prior written permission.
+3. Modifications or new contributions must be attributed in a copyright
+ notice identifying the author ("Contributor") and added below the
+ original copyright notice. The copyright notice is for purposes of
+ identifying contributors and should not be deemed as permission to alter
+ the permissions given by Adaptec.
+
+THIS README FILE IS PROVIDED BY ADAPTEC AND CONTRIBUTORS ``AS IS`` AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY
+WARRANTIES OF NON-INFRINGEMENT OR THE IMPLIED WARRANTIES OF MERCHANTABILITY
+AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ADAPTEC OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS README
+FILE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/Documentation/scsi/index.rst b/Documentation/scsi/index.rst
index b7fdfc0cb956..c0b66763515f 100644
--- a/Documentation/scsi/index.rst
+++ b/Documentation/scsi/index.rst
@@ -12,5 +12,6 @@ Linux SCSI Subsystem
advansys
aha152x
aic79xx
+ aic7xxx

scsi_transport_srp/figures
diff --git a/Documentation/scsi/scsi-parameters.txt b/Documentation/scsi/scsi-parameters.txt
index 8ed9c662a1d4..266fd3b2398a 100644
--- a/Documentation/scsi/scsi-parameters.txt
+++ b/Documentation/scsi/scsi-parameters.txt
@@ -22,7 +22,7 @@ parameters may be changed at runtime by the command
Format: <portbase>[,<buson>,<busoff>[,<dmaspeed>]]

aic7xxx= [HW,SCSI]
- See Documentation/scsi/aic7xxx.txt.
+ See Documentation/scsi/aic7xxx.rst.

aic79xx= [HW,SCSI]
See Documentation/scsi/aic79xx.rst.
diff --git a/drivers/scsi/aic7xxx/Kconfig.aic7xxx b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
index 3546b8cc401f..9d027549d698 100644
--- a/drivers/scsi/aic7xxx/Kconfig.aic7xxx
+++ b/drivers/scsi/aic7xxx/Kconfig.aic7xxx
@@ -37,7 +37,7 @@ config AIC7XXX_CMDS_PER_DEVICE
on some devices. The upper bound is 253. 0 disables tagged queueing.

Per device tag depth can be controlled via the kernel command line
- "tag_info" option. See Documentation/scsi/aic7xxx.txt for details.
+ "tag_info" option. See Documentation/scsi/aic7xxx.rst for details.

config AIC7XXX_RESET_DELAY_MS
int "Initial bus reset delay in milli-seconds"
--
2.21.1
\
 
 \ /
  Last update: 2020-03-02 09:19    [W:0.309 / U:4.756 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site