lkml.org 
[lkml]   [2020]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/9] dt_bindings: ROHM BD99954 Charger
On Tue, Feb 25, 2020 at 10:52:32AM +0200, Matti Vaittinen wrote:
> The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion
> secondary battery. Intended to be used in space-constraint equipment such
> as Low profile Notebook PC, Tablets and other applications. BD99954
> provides a Dual-source Battery Charger, two port BC1.2 detection and a
> Battery Monitor.
>
> Document the DT bindings for BD99954
>
> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> ---
>
> Changes from rfc-v3:
> - uncomment multipleOf
> - add address and size cells properties to example I2C node
>
> .../bindings/power/supply/rohm,bd9995x.yaml | 155 ++++++++++++++++++
> 1 file changed, 155 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/supply/rohm,bd9995x.yaml
>
> diff --git a/Documentation/devicetree/bindings/power/supply/rohm,bd9995x.yaml b/Documentation/devicetree/bindings/power/supply/rohm,bd9995x.yaml
> new file mode 100644
> index 000000000000..547403773ec5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/supply/rohm,bd9995x.yaml
> @@ -0,0 +1,155 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/supply/rohm,bd9995x.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ROHM BD99954 Battery charger driver

Bindings are for h/w devices, not drivers.

> +
> +maintainers:
> + - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> + - Markus Laine <markus.laine@fi.rohmeurope.com>
> + - Mikko Mutanen <mikko.mutanen@fi.rohmeurope.com>
> +
> +description: |
> + The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion
> + secondary battery intended to be used in space-constraint equipment such
> + as Low profile Notebook PC, Tablets and other applications. BD99954
> + provides a Dual-source Battery Charger, two port BC1.2 detection and a
> + Battery Monitor.
> +
> +
> +properties:
> + compatible:
> + const: rohm,bd9995x-charger

You can drop '-charger' if the whole chip is a charger IC. If it is not,
then your example is wrong.

You use BD99954 elsewhere, use that here too. We don't do wildcards in
compatible strings.

> +#
> +# The battery charging profile of BD99954.
> +#
> +# Curve (1) represents charging current.
> +# Curve (2) represents battery voltage.
> +#
> +# The BD99954 data sheet divides charging to three phases.
> +# a) Trickle-charge with constant current (8).
> +# b) pre-charge with constant current (6)
> +# c) fast-charge with:
> +# First a constant current (5) phase (CC)
> +# Then constant voltage (CV) phase (after the battery voltage has reached
> +# target level - until charging current has dropped to termination
> +# level (7)
> +#
> +# V ^ ^ I
> +# . .
> +# . .
> +# (4)- -.- - - - - - - - - - - - - - +++++++++++++++++++++++++++.
> +# . / .
> +# . ++++++/++ - - - - - - - - - - - - -.- - (5)
> +# . + / + .
> +# . + - -- .
> +# . + - + .
> +# . +.- -: .
> +# . .+ +` .
> +# . .- + | `/ .
> +# . .." + .: .
> +# . -" + -- .
> +# . (2) ..." + | :- .
> +# . ..."" + -: .
> +# (3)- -.-.""- - - - -+++++++++ - - - - - - -.:- - - - - - - - - .- - (6)
> +# . + `:. .
> +# . + | -: .
> +# . + -: .
> +# . + .. .
> +# . (1) + | "+++- - - -.- - (7)
> +# -++++++++++++++- - - - - - - - - - - - - - - - - + - - - .- - (8)
> +# . + -
> +# -------------------------------------------------+++++++++-->
> +# | | | CC | CV |
> +# | --trickle-- | -pre- | ---------fast----------- |
> +#
> +# The charger uses the following battery properties
> +# - trickle-charge-current-microamp:
> +# Current used at trickle-charge phase (8 in above chart)
> +# minimum: 64000
> +# maximum: 1024000
> +# multipleOf: 64000

Why is all of this commented out still?

> +# - precharge-current-microamp:
> +# Current used at pre-charge phase (6 in above chart)
> +# minimum: 64000
> +# maximum: 1024000
> +# multipleOf: 64000
> +# - constant-charge-current-max-microamp
> +# Current used at fast charge constant current phase (5 in above chart)
> +# minimum: 64000
> +# maximum: 1024000
> +# multipleOf: 64000
> +# - constant-charge-voltage-max-microvolt
> +# The constant voltage used in fast charging phase (4 in above chart)
> +# minimum: 2560000
> +# maximum: 19200000
> +# multipleOf: 16000
> +# - precharge-upper-limit-microvolt
> +# charging mode is changed from trickle charging to pre-charging
> +# when battery voltage exceeds this limit voltage (3 in above chart)
> +# minimum: 2048000
> +# maximum: 19200000
> +# multipleOf: 64000
> +# - re-charge-voltage-microvolt
> +# minimum: 2560000
> +# maximum: 19200000
> +# multipleOf: 16000
> +# re-charging is automatically started when battry has been discharging
> +# to the point where the battery voltage drops below this limit
> +# - over-voltage-threshold-microvolt
> +# battery is expected to be faulty if battery voltage exceeds this limit.
> +# Charger will then enter to a "battery faulty" -state
> +# minimum: 2560000
> +# maximum: 19200000
> +# multipleOf: 16000
> +# - charge-term-current-microamp
> +# minimum: 0
> +# maximum: 1024000
> +# multipleOf: 64000
> +# a charge cycle terminates when the battery voltage is above recharge
> +# threshold, and the current is below this setting (7 in above chart)
> +# See also Documentation/devicetree/bindings/power/supply/battery.txt
> +
> + monitored-battery:
> + description:
> + phandle of battery characteristics devicetree node
> +
> + rohm,vsys-regulation-microvolt:
> + description: system specific lower limit for system voltage.
> + minimum: 2560000
> + maximum: 19200000
> + multipleOf: 64000
> +
> + rohm,vbus-input-current-limit-microamp:
> + description: system specific VBUS input current limit (in microamps).
> + minimum: 32000
> + maximum: 16352000
> + multipleOf: 32000
> +
> + rohm,vcc-input-current-limit-microamp:
> + description: system specific VCC/VACP input current limit (in microamps).
> + minimum: 32000
> + maximum: 16352000
> + multipleOf: 32000
> +
> +required:
> + - compatible
> +
> +examples:
> + - |
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + charger@9 {
> + compatible = "rohm,bd9995x-charger";
> + monitored-battery = <&battery>;
> + reg = <0x9>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <29 8>;
> + rohm,vsys-regulation-microvolt = <8960000>;
> + rohm,vbus-input-current-limit-microamp = <1472000>;
> + rohm,vcc-input-current-limit-microamp = <1472000>;
> + };
> + };
> --
> 2.21.0
>
>
> --
> Matti Vaittinen, Linux device drivers
> ROHM Semiconductors, Finland SWDC
> Kiviharjunlenkki 1E
> 90220 OULU
> FINLAND
>
> ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
> Simon says - in Latin please.
> ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
> Thanks to Simon Glass for the translation =]

\
 
 \ /
  Last update: 2020-03-02 23:08    [W:0.172 / U:2.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site