lkml.org 
[lkml]   [2020]   [Mar]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 1/9] dt-bindings: battery: add new battery parameters
On Tue, 25 Feb 2020 10:52:04 +0200, Matti Vaittinen wrote:
> Add:
>
> - trickle-charge-current-microamp:
>
> Some chargers have 3 charging stages. First one when battery is almost
> empty is often called as trickle-charge. Last state when battery has been
> "woken up" is usually called as fast-charge. In addition to this some
> chargers have a 'middle state' which ROHM BD99954 data-sheet describes as
> pre-charge. Some batteries can benefit from this 3-phase charging
> [citation needed].
>
> Introduce trickle-charge-current-microamp so that batteries can give
> charging current limit for all three states.
>
> - precharge-upper-limit-microvolt:
>
> When battery voltage has reached certain limit we change from
> trickle-charge to next charging state (pre-charge for BD99954). Allow
> battery to specify this limit.
>
> - re-charge-voltage-microvolt:
>
> Allow giving a battery specific voltage limit for chargers which can
> automatically re-start charging when battery has discharghed down to
> this limit.
>
> - over-voltage-threshold-microvolt
>
> Allow specifying voltage threshold after which the battery is assumed to
> be faulty.
>
> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> ---
>
> Changes from rfc-v3:
> Fixed typo in commit message battry => battery
>
> Documentation/devicetree/bindings/power/supply/battery.txt | 6 ++++++
> 1 file changed, 6 insertions(+)
>

Reviewed-by: Rob Herring <robh@kernel.org>

\
 
 \ /
  Last update: 2020-03-02 23:01    [W:0.260 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site