lkml.org 
[lkml]   [2020]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 04/60] mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch()
Date
From: Ulf Hansson <ulf.hansson@linaro.org>

[ Upstream commit 533a6cfe08f96a7b5c65e06d20916d552c11b256 ]

All callers of __mmc_switch() should now be specifying a valid timeout for
the CMD6 command. However, just to be sure, let's print a warning and
default to use the generic_cmd6_time in case the provided timeout_ms
argument is zero.

In this context, let's also simplify some of the corresponding code and
clarify some related comments.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20200122142747.5690-4-ulf.hansson@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mmc/core/mmc_ops.c | 25 +++++++++++--------------
1 file changed, 11 insertions(+), 14 deletions(-)

diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 09113b9ad6790..cfb2ce979baf1 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -458,10 +458,6 @@ static int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
bool expired = false;
bool busy = false;

- /* We have an unspecified cmd timeout, use the fallback value. */
- if (!timeout_ms)
- timeout_ms = MMC_OPS_TIMEOUT_MS;
-
/*
* In cases when not allowed to poll by using CMD13 or because we aren't
* capable of polling by using ->card_busy(), then rely on waiting the
@@ -534,14 +530,19 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,

mmc_retune_hold(host);

+ if (!timeout_ms) {
+ pr_warn("%s: unspecified timeout for CMD6 - use generic\n",
+ mmc_hostname(host));
+ timeout_ms = card->ext_csd.generic_cmd6_time;
+ }
+
/*
- * If the cmd timeout and the max_busy_timeout of the host are both
- * specified, let's validate them. A failure means we need to prevent
- * the host from doing hw busy detection, which is done by converting
- * to a R1 response instead of a R1B.
+ * If the max_busy_timeout of the host is specified, make sure it's
+ * enough to fit the used timeout_ms. In case it's not, let's instruct
+ * the host to avoid HW busy detection, by converting to a R1 response
+ * instead of a R1B.
*/
- if (timeout_ms && host->max_busy_timeout &&
- (timeout_ms > host->max_busy_timeout))
+ if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout))
use_r1b_resp = false;

cmd.opcode = MMC_SWITCH;
@@ -552,10 +553,6 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
cmd.flags = MMC_CMD_AC;
if (use_r1b_resp) {
cmd.flags |= MMC_RSP_SPI_R1B | MMC_RSP_R1B;
- /*
- * A busy_timeout of zero means the host can decide to use
- * whatever value it finds suitable.
- */
cmd.busy_timeout = timeout_ms;
} else {
cmd.flags |= MMC_RSP_SPI_R1 | MMC_RSP_R1;
--
2.20.1


\
 
 \ /
  Last update: 2020-03-19 14:30    [W:1.535 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site