Messages in this thread Patch in this message | | | From | Lad Prabhakar <> | Subject | [PATCH v4 1/5] media: dt-bindings: media: i2c: Deprecate usage of the clock-frequency property | Date | Thu, 19 Mar 2020 12:19:19 +0000 |
| |
Deprecate usage of the clock-frequency property. The preferred method to set clock rates is to use assigned-clock-rates.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- Documentation/devicetree/bindings/media/i2c/ov5645.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5645.txt b/Documentation/devicetree/bindings/media/i2c/ov5645.txt index 72ad992f77be..1c85c78ec58c 100644 --- a/Documentation/devicetree/bindings/media/i2c/ov5645.txt +++ b/Documentation/devicetree/bindings/media/i2c/ov5645.txt @@ -8,7 +8,6 @@ Required Properties: - compatible: Value should be "ovti,ov5645". - clocks: Reference to the xclk clock. - clock-names: Should be "xclk". -- clock-frequency: Frequency of the xclk clock. - enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds to the hardware pin PWDNB which is physically active low. - reset-gpios: Chip reset GPIO. Polarity is GPIO_ACTIVE_LOW. This corresponds to @@ -37,7 +36,8 @@ Example: clocks = <&clks 200>; clock-names = "xclk"; - clock-frequency = <24000000>; + assigned-clocks = <&clks 200>; + assigned-clock-rates = <24000000>; vdddo-supply = <&camera_dovdd_1v8>; vdda-supply = <&camera_avdd_2v8>; -- 2.20.1
| |