lkml.org 
[lkml]   [2020]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next v3 2/2] net: phy: mscc: RGMII skew delay configuration
On Thu, Mar 19, 2020 at 03:19:58PM +0100, Antoine Tenart wrote:
> This patch adds support for configuring the RGMII skew delays in Rx and
> Tx. The Rx and Tx skews are set based on the interface mode. By default
> their configuration is set to the default value in hardware (0.2ns);
> this means the driver do not rely anymore on the bootloader
> configuration.
>
> Then based on the interface mode being used, a 2ns delay is added:
> - RGMII_ID adds it for both Rx and Tx.
> - RGMII_RXID adds it for Rx.
> - RGMII_TXID adds it for Tx.
>
> Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Andrew

\
 
 \ /
  Last update: 2020-03-19 17:53    [W:1.753 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site