lkml.org 
[lkml]   [2020]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [linux-sunxi] [PATCH v2 5/5] arm64: allwinner: dts: a64: add LCD-related device nodes for PinePhone
From
Date
在 2020-03-16星期一的 21:35 +0800,Icenowy Zheng写道:
> PinePhone uses PWM backlight and a XBD599 LCD panel over DSI for
> display.
>
> Add its device nodes.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> ---
> No changes in v2.
>
> .../dts/allwinner/sun50i-a64-pinephone.dtsi | 37
> +++++++++++++++++++
> 1 file changed, 37 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> index cefda145c3c9..96d9150423e0 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> @@ -16,6 +16,15 @@ aliases {
> serial0 = &uart0;
> };
>
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
> + brightness-levels = <0 16 18 20 22 24 26 29 32 35 38 42
> 46 51 56 62 68 75 83 91 100>;

Should I drop the 0 here and replace it with 14?

I have heard community complaining about setting 0 to brightness make
the screen black.

(I think in this situation bl_power or blank the DSI panel can still
totally shut down the backlight).

> + default-brightness-level = <15>;
> + enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
> + power-supply = <&reg_ldo_io0>;
> + };
> +
> chosen {
> stdout-path = "serial0:115200n8";
> };
> @@ -84,6 +93,30 @@ &dai {
> status = "okay";
> };
>
> +&de {
> + status = "okay";
> +};
> +
> +&dphy {
> + status = "okay";
> +};
> +
> +&dsi {
> + vcc-dsi-supply = <&reg_dldo1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";
> +
> + panel@0 {
> + compatible = "xingbangda,xbd599";
> + reg = <0>;
> + reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */
> + iovcc-supply = <&reg_dldo2>;
> + vcc-supply = <&reg_ldo_io0>;
> + backlight = <&backlight>;
> + };
> +};
> +
> &ehci0 {
> status = "okay";
> };
> @@ -188,6 +221,10 @@ &r_pio {
> */
> };
>
> +&r_pwm {
> + status = "okay";
> +};
> +
> &r_rsb {
> status = "okay";
>
> --
> 2.24.1
>

\
 
 \ /
  Last update: 2020-03-19 15:53    [W:0.144 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site