lkml.org 
[lkml]   [2020]   [Mar]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/7] dt-bindings: usb: dwc3: Add a gpio-usb-connector example
From
Date
Quoting Bryan O'Donoghue (2020-03-11 12:14:56)
> A USB connector should be a child node of the USB controller
> connector/usb-connector.txt. This patch adds an example of how to do this
> to the dwc3 binding descriptions.

I read that as a child of the USB interface controller, which is not the
same as the USB controller. For example, we're talking about having the
usb connector be a child of the EC on ChromeOS devices because that
manages the connector

>
> It is necessary to declare a connector as a child-node of a USB controller
> for role-switching to work, so this example should be helpful to others
> implementing that.

Maybe it should be a virtual node at the root of the DT if it's GPIO
controlled? And then the phy can be connected to the usb connector
through the graph binding.

>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: linux-usb@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Acked-by: Felipe Balbi <balbi@kernel.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> ---
> Documentation/devicetree/bindings/usb/dwc3.txt | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
> index 66780a47ad85..4e1e4afccee6 100644
> --- a/Documentation/devicetree/bindings/usb/dwc3.txt
> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt
> @@ -121,4 +121,12 @@ dwc3@4a030000 {
> interrupts = <0 92 4>
> usb-phy = <&usb2_phy>, <&usb3,phy>;

Weird that there's a comma here ^

Not a problem with this patch, just noticing it while reading the diff.

> snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
> +
> + usb_con: connector {
> + compatible = "gpio-usb-b-connector";
> + id-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
> + vbus-supply = <&usb3_vbus_reg>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb3_id_pin>, <&usb3_vbus_pin>;
> + };

\
 
 \ /
  Last update: 2020-03-19 02:09    [W:0.106 / U:2.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site