lkml.org 
[lkml]   [2020]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 12/28] spi: dt-bindings: spi-controller: Slaves have no address cells
Date
SPI controllers in slave mode have a single child node that has no
address. Enforce #address-cells of zero instead of one.

Fixes: 0a1b929356830 ("spi: Add YAML schemas for the generic SPI options")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
.../bindings/spi/spi-controller.yaml | 23 ++++++++++++++-----
1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
index d8e5509a70816..30d774cf6cc95 100644
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -15,16 +15,27 @@ description: |
controller may be described for use in SPI master mode or in SPI slave mode,
but not for both at the same time.

+allOf:
+ - if:
+ required:
+ - spi-slave
+ then:
+ properties:
+ "#address-cells":
+ const: 0
+ "#size-cells":
+ const: 0
+ else:
+ properties:
+ "#address-cells":
+ const: 1
+ "#size-cells":
+ const: 0
+
properties:
$nodename:
pattern: "^spi(@.*|-[0-9a-f])*$"

- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
cs-gpios:
description: |
GPIOs used as chip selects.
--
2.25.1
\
 
 \ /
  Last update: 2020-03-17 10:43    [W:0.181 / U:8.924 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site