lkml.org 
[lkml]   [2020]   [Mar]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 26/28] dt-bindings: spi: Convert spi-pxa2xx to json-schema
Date
A straightforward conversion of the the spi-pxa2xx binding to DT schema
format using json-schema.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
.../bindings/spi/marvell,mmp2-ssp.yaml | 58 +++++++++++++++++++
.../devicetree/bindings/spi/spi-pxa2xx.txt | 27 ---------
2 files changed, 58 insertions(+), 27 deletions(-)
create mode 100644 Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml
delete mode 100644 Documentation/devicetree/bindings/spi/spi-pxa2xx.txt

diff --git a/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml b/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml
new file mode 100644
index 0000000000000..de6b6a53b70d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+# Copyright 2019,2020 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/marvell,mmp2-ssp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PXA2xx SSP SPI Controller bindings
+
+maintainers:
+ - Lubomir Rintel <lkundrak@v3.sk>
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+properties:
+ compatible:
+ const: marvell,mmp2-ssp
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ ready-gpios:
+ description: |
+ GPIO used to signal a SPI master that the FIFO is filled and we're
+ ready to service a transfer. Only useful in slave mode.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - '#address-cells'
+ - '#size-cells'
+
+dependencies:
+ ready-gpios: [ spi-slave ]
+
+examples:
+ - |
+ #include <dt-bindings/clock/marvell,mmp2.h>
+ spi@d4035000 {
+ compatible = "marvell,mmp2-ssp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xd4035000 0x1000>;
+ clocks = <&soc_clocks MMP2_CLK_SSP0>;
+ interrupts = <0>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt b/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
deleted file mode 100644
index e30e0c2a4bce1..0000000000000
--- a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-PXA2xx SSP SPI Controller
-
-Required properties:
-- compatible: Must be "marvell,mmp2-ssp".
-- reg: Offset and length of the device's register set.
-- interrupts: Should be the interrupt number.
-- clocks: Should contain a single entry describing the clock input.
-- #address-cells: Number of cells required to define a chip select address.
-- #size-cells: Should be zero.
-
-Optional properties:
-- cs-gpios: list of GPIO chip selects. See the SPI bus bindings,
- Documentation/devicetree/bindings/spi/spi-bus.txt
-- spi-slave: Empty property indicating the SPI controller is used in slave mode.
-- ready-gpios: GPIO used to signal a SPI master that the FIFO is filled
- and we're ready to service a transfer. Only useful in slave mode.
-
-Child nodes represent devices on the SPI bus
- See ../spi/spi-bus.txt
-
-Example:
- ssp1: spi@d4035000 {
- compatible = "marvell,mmp2-ssp";
- reg = <0xd4035000 0x1000>;
- clocks = <&soc_clocks MMP2_CLK_SSP0>;
- interrupts = <0>;
- };
--
2.25.1
\
 
 \ /
  Last update: 2020-03-17 10:41    [W:0.190 / U:8.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site