lkml.org 
[lkml]   [2020]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: dts: rockchip: fix lvds-encoder ports subnode for rk3188-bqedison2qc
Date
A test with the command below gives this error:

arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml: lvds-encoder:
'ports' is a required property

Fix error by adding a ports wrapper for port@0 and port@1
inside the 'lvds-encoder' node for rk3188-bqedison2qc.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/
bridge/lvds-codec.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
arch/arm/boot/dts/rk3188-bqedison2qc.dts | 27 ++++++++++++++++-----------
1 file changed, 16 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/rk3188-bqedison2qc.dts b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
index 8afb2fd5d..66a0ff196 100644
--- a/arch/arm/boot/dts/rk3188-bqedison2qc.dts
+++ b/arch/arm/boot/dts/rk3188-bqedison2qc.dts
@@ -58,20 +58,25 @@

lvds-encoder {
compatible = "ti,sn75lvds83", "lvds-encoder";
- #address-cells = <1>;
- #size-cells = <0>;

- port@0 {
- reg = <0>;
- lvds_in_vop0: endpoint {
- remote-endpoint = <&vop0_out_lvds>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lvds_in_vop0: endpoint {
+ remote-endpoint = <&vop0_out_lvds>;
+ };
};
- };

- port@1 {
- reg = <1>;
- lvds_out_panel: endpoint {
- remote-endpoint = <&panel_in_lvds>;
+ port@1 {
+ reg = <1>;
+
+ lvds_out_panel: endpoint {
+ remote-endpoint = <&panel_in_lvds>;
+ };
};
};
};
--
2.11.0
\
 
 \ /
  Last update: 2020-03-16 18:47    [W:0.042 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site