lkml.org 
[lkml]   [2020]   [Mar]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] phy: intel: Add Keem Bay eMMC PHY support
Date
Hi.

The first part is to document DT bindings for Keem Bay eMMC PHY.

The second is the driver file, loosely based on phy-rockchip-emmc.c
and phy-intel-emmc.c. The latter is not being reused as there are
quite a number of differences i.e. registers offset, supported clock
rates, bitfield to set.

The patch was tested with Keem Bay evaluation module board.

Thank you.

Best regards,
Zainie


Wan Ahmad Zainie (2):
dt-bindings: phy: intel: Add documentation for Keem Bay eMMC PHY
phy: intel: Add Keem Bay eMMC PHY support

.../bindings/phy/intel,keembay-emmc-phy.yaml | 57 +++++
drivers/phy/intel/Kconfig | 7 +
drivers/phy/intel/Makefile | 1 +
drivers/phy/intel/phy-keembay-emmc.c | 231 ++++++++++++++++++
4 files changed, 296 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/intel,keembay-emmc-phy.yaml
create mode 100644 drivers/phy/intel/phy-keembay-emmc.c

--
2.17.1

\
 
 \ /
  Last update: 2020-03-16 11:38    [W:0.089 / U:14.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site