lkml.org 
[lkml]   [2020]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt-bindings: input: Update atmel,maxtouch.txt to YAML
Date
Update atmel,maxtouch.txt to YAML. The new 'vdd-supply' property was
added in the process.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
.../bindings/input/atmel,maxtouch.txt | 41 -----------
.../bindings/input/atmel,maxtouch.yaml | 68 +++++++++++++++++++
2 files changed, 68 insertions(+), 41 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/input/atmel,maxtouch.txt
create mode 100644 Documentation/devicetree/bindings/input/atmel,maxtouch.yaml

diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
deleted file mode 100644
index c88919480d37..000000000000
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Atmel maXTouch touchscreen/touchpad
-
-Required properties:
-- compatible:
- atmel,maxtouch
-
- The following compatibles have been used in various products but are
- deprecated:
- atmel,qt602240_ts
- atmel,atmel_mxt_ts
- atmel,atmel_mxt_tp
- atmel,mXT224
-
-- reg: The I2C address of the device
-
-- interrupts: The sink for the touchpad's IRQ output
- See ../interrupt-controller/interrupts.txt
-
-Optional properties for main touchpad device:
-
-- linux,gpio-keymap: When enabled, the SPT_GPIOPWN_T19 object sends messages
- on GPIO bit changes. An array of up to 8 entries can be provided
- indicating the Linux keycode mapped to each bit of the status byte,
- starting at the LSB. Linux keycodes are defined in
- <dt-bindings/input/input.h>.
-
- Note: the numbering of the GPIOs and the bit they start at varies between
- maXTouch devices. You must either refer to the documentation, or
- experiment to determine which bit corresponds to which input. Use
- KEY_RESERVED for unused padding values.
-
-- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
-
-Example:
-
- touch@4b {
- compatible = "atmel,maxtouch";
- reg = <0x4b>;
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
- };
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
new file mode 100644
index 000000000000..1b138a9836bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/atmel,maxtouch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel maXTouch touchscreen/touchpad DT bindings
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+ compatible:
+ enum:
+ - atmel,maxtouch
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ vdd-supply:
+ description: Phandle to regulator providing power to the touchscreen
+
+ linux,gpio-keymap:
+ minItems: 1
+ maxItems: 8
+ description: >
+ When enabled, the SPT_GPIOPWN_T19 object sends messages
+ on GPIO bit changes. An array of up to 8 entries can be provided
+ indicating the Linux keycode mapped to each bit of the status byte,
+ starting at the LSB. Linux keycodes are defined in
+ <dt-bindings/input/input.h>.
+
+ Note: the numbering of the GPIOs and the bit they start at varies between
+ maXTouch devices. You must either refer to the documentation, or
+ experiment to determine which bit corresponds to which input. Use
+ KEY_RESERVED for unused padding values.
+
+ reset-gpios:
+ description: GPIO specifier for the touchscreen's reset pin (active low)
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mxt224-touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ reg = <0x4a>;
+
+ interrupt-parent = <&gpx0>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+
+ vdd-supply = <&tsp_reg>;
+ };
+ };
--
2.25.1
\
 
 \ /
  Last update: 2020-03-15 11:04    [W:0.793 / U:9.876 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site