lkml.org 
[lkml]   [2020]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 3/5] iio: adc: mp2629: Add support for mp2629 ADC driver
From
Date

On 15/03/20 11:37 am, Jonathan Cameron wrote:
> On Sun, 15 Mar 2020 01:00:11 +0100
> Saravanan Sekar <sravanhome@gmail.com> wrote:
>
>> Add support for 8-bit resolution ADC readings for input power
>> supply and battery charging measurement. Provides voltage, current
>> readings to mp2629 power supply driver.
>>
>> Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
> The IIO parts seems fine (minor comments inline) but I'm not keep on
> directly accessing the internals of the mfd device info structure.
>
> To my mind that should be opaque to the child drivers so as to provide
> clear structure to any such accesses.
>
> Jonathan
>
>
>> ---
>> drivers/iio/adc/Kconfig | 10 ++
>> drivers/iio/adc/Makefile | 1 +
>> drivers/iio/adc/mp2629_adc.c | 209 +++++++++++++++++++++++++++++++++++
>> 3 files changed, 220 insertions(+)
>> create mode 100644 drivers/iio/adc/mp2629_adc.c
>>
>> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
>> index 82e33082958c..ef0c0cd31855 100644
>> --- a/drivers/iio/adc/Kconfig
>> +++ b/drivers/iio/adc/Kconfig
>> @@ -680,6 +680,16 @@ config MESON_SARADC
>> To compile this driver as a module, choose M here: the
>> module will be called meson_saradc.
>>
>> +config MP2629_ADC
>> + tristate "Monolithic MP2629 ADC driver"
>> + depends on MFD_MP2629
>> + help
>> + Say yes to have support for battery charger IC MP2629 ADC device
>> + accessed over I2C.
>> +
>> + This driver provides ADC conversion of system, input power supply
>> + and battery voltage & current information.
>> +
>> config NAU7802
>> tristate "Nuvoton NAU7802 ADC driver"
>> depends on I2C
>> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
>> index 919228900df9..f14416c245a6 100644
>> --- a/drivers/iio/adc/Makefile
>> +++ b/drivers/iio/adc/Makefile
>> @@ -64,6 +64,7 @@ obj-$(CONFIG_MCP3911) += mcp3911.o
>> obj-$(CONFIG_MEDIATEK_MT6577_AUXADC) += mt6577_auxadc.o
>> obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
>> obj-$(CONFIG_MESON_SARADC) += meson_saradc.o
>> +obj-$(CONFIG_MP2629_ADC) += mp2629_adc.o
>> obj-$(CONFIG_MXS_LRADC_ADC) += mxs-lradc-adc.o
>> obj-$(CONFIG_NAU7802) += nau7802.o
>> obj-$(CONFIG_NPCM_ADC) += npcm_adc.o
>> diff --git a/drivers/iio/adc/mp2629_adc.c b/drivers/iio/adc/mp2629_adc.c
>> new file mode 100644
>> index 000000000000..1a99196624ed
>> --- /dev/null
>> +++ b/drivers/iio/adc/mp2629_adc.c
>> @@ -0,0 +1,209 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
>> +/*
>> + * MP2629 Driver for ADC
>> + *
>> + * Copyright 2020 Monolithic Power Systems, Inc
>> + *
>> + * Author: Saravanan Sekar <sravanhome@gmail.com>
>> + */
>> +
>> +#include <linux/platform_device.h>
>> +#include <linux/of_device.h>
>> +#include <linux/module.h>
>> +#include <linux/mutex.h>
>> +#include <linux/regulator/consumer.h>
>> +#include <linux/sysfs.h>
>> +#include <linux/regmap.h>
>> +
>> +#include <linux/iio/iio.h>
>> +#include <linux/iio/machine.h>
>> +#include <linux/iio/driver.h>
>> +#include <linux/mfd/mp2629.h>
>> +
>> +#define MP2629_REG_ADC_CTRL 0x03
>> +#define MP2629_REG_BATT_VOLT 0x0e
>> +#define MP2629_REG_SYSTEM_VOLT 0x0f
>> +#define MP2629_REG_INPUT_VOLT 0x11
>> +#define MP2629_REG_BATT_CURRENT 0x12
>> +#define MP2629_REG_INPUT_CURRENT 0x13
>> +
>> +#define MP2629_ADC_START BIT(7)
>> +#define MP2629_ADC_CONTINUOUS BIT(6)
> Odd alignment.
>
>> +
>> +#define MP2629_MAP(_mp, _mpc) IIO_MAP(#_mp, "mp2629_charger", "mp2629-"_mpc)
>> +
>> +#define MP2629_ADC_CHAN(_ch, _type) { \
>> + .type = _type, \
>> + .indexed = 1, \
>> + .datasheet_name = #_ch, \
>> + .channel = MP2629_ ## _ch, \
>> + .address = MP2629_REG_ ## _ch, \
>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
>> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
>> +}
>> +
>> +static struct iio_chan_spec mp2629_channels[] = {
>> + MP2629_ADC_CHAN(BATT_VOLT, IIO_VOLTAGE),
>> + MP2629_ADC_CHAN(SYSTEM_VOLT, IIO_VOLTAGE),
>> + MP2629_ADC_CHAN(INPUT_VOLT, IIO_VOLTAGE),
>> + MP2629_ADC_CHAN(BATT_CURRENT, IIO_CURRENT),
>> + MP2629_ADC_CHAN(INPUT_CURRENT, IIO_CURRENT)
>> +};
>> +
>> +struct mp2629_adc {
>> + struct mp2629_info *info;
>> + struct device *dev;
>> +};
>> +
>> +static struct iio_map mp2629_adc_maps[] = {
>> + MP2629_MAP(BATT_VOLT, "batt-volt"),
>> + MP2629_MAP(SYSTEM_VOLT, "system-volt"),
>> + MP2629_MAP(INPUT_VOLT, "input-volt"),
>> + MP2629_MAP(BATT_CURRENT, "batt-current"),
>> + MP2629_MAP(INPUT_CURRENT, "input-current")
>> +};
>> +
>> +static int mp2629_read_raw(struct iio_dev *indio_dev,
>> + struct iio_chan_spec const *chan,
>> + int *val, int *val2, long mask)
>> +{
>> + struct mp2629_adc *adc_info = iio_priv(indio_dev);
>> + struct mp2629_info *info = adc_info->info;
>> + unsigned int rval;
>> + int ret;
>> +
>> + switch (mask) {
>> + case IIO_CHAN_INFO_RAW:
>> + ret = regmap_read(info->regmap, chan->address, &rval);
>> + if (ret < 0)
>> + return ret;
>> +
>> + if (chan->address == MP2629_INPUT_VOLT)
>> + rval &= 0x7f;
>> + *val = rval;
>> + return IIO_VAL_INT;
>> +
>> + case IIO_CHAN_INFO_SCALE:
>> + switch (chan->channel) {
>> + case MP2629_BATT_VOLT:
>> + case MP2629_SYSTEM_VOLT:
>> + *val = 20;
>> + return IIO_VAL_INT;
>> +
>> + case MP2629_INPUT_VOLT:
>> + *val = 60;
>> + return IIO_VAL_INT;
>> +
>> + case MP2629_BATT_CURRENT:
>> + *val = 175;
>> + *val2 = 10;
>> + return IIO_VAL_FRACTIONAL;
>> +
>> + case MP2629_INPUT_CURRENT:
>> + *val = 133;
>> + *val2 = 10;
>> + return IIO_VAL_FRACTIONAL;
>> +
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static const struct iio_info mp2629_adc_info = {
>> + .read_raw = &mp2629_read_raw,
>> +};
>> +
>> +static int mp2629_adc_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct mp2629_info *info = dev_get_drvdata(dev->parent);
>> + struct mp2629_adc *adc_info;
>> + struct iio_dev *indio_dev;
>> + int ret;
>> +
>> + indio_dev = devm_iio_device_alloc(dev, sizeof(*adc_info));
>> + if (!indio_dev)
>> + return -ENOMEM;
>> +
>> + adc_info = iio_priv(indio_dev);
>> + platform_set_drvdata(pdev, indio_dev);
>> + adc_info->info = info;
>> + adc_info->dev = dev;
>> +
>> + ret = iio_map_array_register(indio_dev, mp2629_adc_maps);
>> + if (ret) {
>> + dev_err(dev, "IIO maps register fail: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + indio_dev->name = dev_name(dev);
>> + indio_dev->dev.parent = dev;
>> + indio_dev->dev.of_node = pdev->dev.of_node;
>> + indio_dev->channels = mp2629_channels;
>> + indio_dev->num_channels = ARRAY_SIZE(mp2629_channels);
>> + indio_dev->modes = INDIO_DIRECT_MODE;
>> + indio_dev->info = &mp2629_adc_info;
>> +
>> + ret = regmap_update_bits(info->regmap, MP2629_REG_ADC_CTRL,
>> + MP2629_ADC_START | MP2629_ADC_CONTINUOUS,
>> + MP2629_ADC_START | MP2629_ADC_CONTINUOUS);
>> + if (ret) {
>> + dev_err(dev, "adc enable fail: %d\n", ret);
>> + goto fail_unmap;
>> + }
>> +
>> + ret = devm_iio_device_register(dev, indio_dev);
>> + if (ret) {
>> + dev_err(dev, "IIO device register fail: %d\n", ret);
>> + goto fail_unmap;
> Should we not be turning the device off like we do in remove?
>
>> + }
>> +
>> + return 0;
>> +
>> +fail_unmap:
>> + iio_map_array_unregister(indio_dev);
>> + return ret;
>> +}
>> +
>> +static int mp2629_adc_remove(struct platform_device *pdev)
>> +{
>> + struct iio_dev *indio_dev = platform_get_drvdata(pdev);
>> + struct mp2629_adc *adc_info = iio_priv(indio_dev);
>> + struct mp2629_info *info = adc_info->info;
> This mess in layering with the children directly using the parents
> regmap is a little concerning. It means that the 3 drivers
> really aren't very well separated and can't really be reviewed
> independently (not a good thing).
>
> It might just be a question of providing a wrapper in the mfd driver
> code so we at least have some visibility that this is going on.

I had expored a wrapper in mfd driver in previous revision of patch, I
was asked

to remove it. If wrapper is agreed then I will remove mfd mp2629_info
struct.

>
>> +
>> + regmap_update_bits(info->regmap, MP2629_REG_ADC_CTRL,
>> + MP2629_ADC_CONTINUOUS, 0);
>> + regmap_update_bits(info->regmap, MP2629_REG_ADC_CTRL,
>> + MP2629_ADC_START, 0);
>> +
>> + iio_map_array_unregister(indio_dev);
>> + iio_device_unregister(indio_dev);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id mp2629_adc_of_match[] = {
>> + { .compatible = "mps,mp2629_adc"},
>> + {}
>> +};
>> +MODULE_DEVICE_TABLE(of, mp2629_adc_of_match);
>> +
>> +static struct platform_driver mp2629_adc_driver = {
>> + .driver = {
>> + .name = "mp2629_adc",
>> + .of_match_table = mp2629_adc_of_match,
>> + },
>> + .probe = mp2629_adc_probe,
>> + .remove = mp2629_adc_remove,
>> +};
>> +module_platform_driver(mp2629_adc_driver);
>> +
>> +MODULE_AUTHOR("Saravanan Sekar <sravanhome@gmail.com>");
>> +MODULE_DESCRIPTION("MP2629 ADC driver");
>> +MODULE_LICENSE("GPL");

\
 
 \ /
  Last update: 2020-03-15 22:24    [W:0.068 / U:3.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site