lkml.org 
[lkml]   [2020]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v2] iio: health: max30100: use generic property handler
Instead of of_property_read_xxx use device_property_read_xxx as it is
compatible with ACPI too as opposed to only device tree.

Signed-off-by: Rohit Sarkar <rohitsarkar5398@gmail.com>
---
Changelog
v1 -> v2
- remove of_match_ptr to make it possible to use PRP0001 ACPI based
bindings
drivers/iio/health/max30100.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/health/max30100.c b/drivers/iio/health/max30100.c
index 84010501762d..546fc37ad75d 100644
--- a/drivers/iio/health/max30100.c
+++ b/drivers/iio/health/max30100.c
@@ -16,7 +16,7 @@
#include <linux/irq.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
-#include <linux/of.h>
+#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
@@ -267,11 +267,10 @@ static int max30100_get_current_idx(unsigned int val, int *reg)
static int max30100_led_init(struct max30100_data *data)
{
struct device *dev = &data->client->dev;
- struct device_node *np = dev->of_node;
unsigned int val[2];
int reg, ret;

- ret = of_property_read_u32_array(np, "maxim,led-current-microamp",
+ ret = device_property_read_u32_array(dev, "maxim,led-current-microamp",
(unsigned int *) &val, 2);
if (ret) {
/* Default to 24 mA RED LED, 50 mA IR LED */
@@ -502,7 +501,7 @@ MODULE_DEVICE_TABLE(of, max30100_dt_ids);
static struct i2c_driver max30100_driver = {
.driver = {
.name = MAX30100_DRV_NAME,
- .of_match_table = of_match_ptr(max30100_dt_ids),
+ .of_match_table = max30100_dt_ids,
},
.probe = max30100_probe,
.remove = max30100_remove,
--
2.23.0.385.gbc12974a89
\
 
 \ /
  Last update: 2020-03-15 16:26    [W:0.027 / U:0.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site