lkml.org 
[lkml]   [2020]   [Mar]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5] iio: Add SEMTECH SX9310/9311 sensor driver
On Tue, 10 Mar 2020 14:06:59 -0600
Daniel Campello <campello@chromium.org> wrote:

> Add SEMTECH SX9310/9311 driver.
>
> The device has the following entry points:
>
> Usual frequency:
> - sampling_frequency
> - sampling_frequency_available
>
> Instant reading of current values for different sensors:
> - in_proximity0_raw
> - in_proximity1_raw
> - in_proximity2_raw
> - in_proximity3_comb_raw
> and associated events in events/
>
> Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
> Signed-off-by: Enrico Granata <egranata@chromium.org>
> Signed-off-by: Daniel Campello <campello@chromium.org>

Looks good to me...

But I've been so focused on the driver I missed the obvious.

Where is the accompanying DT bindings doc?

It looks like it'll be trivial, but please send on as a follow up
patch (or if appropriate add it to trivial-devices.yaml)

Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.

Thanks,

Jonathan

> ---
> v5 changes:
> - Fixed size of allocated buffer to include timestamp
> - Changed string comparison to whoami comparison when probing and
> assigning device name
> v4 changes:
> - Renamed in_proximity3_COMB_raw to in_proximity3_comb_raw and added
> documentation for it
> - Minor clean ups
> v3 changes:
> - Fixed "Using plain integer as NULL pointer"
> v2 changes:
> - Removed differential channels
> - Raw channels expose data from SX9310_REG_DIFF_MSB registers
> - 4th channel uses extend_name = COMB
> - Allocated data->buffer statically
> - Check whoami value against i2c / acpi device id
> - General clean up
>
> .../ABI/testing/sysfs-bus-iio-sx9310 | 10 +
> drivers/iio/proximity/Kconfig | 13 +
> drivers/iio/proximity/Makefile | 1 +
> drivers/iio/proximity/sx9310.c | 1069 +++++++++++++++++
> 4 files changed, 1093 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-sx9310
> create mode 100644 drivers/iio/proximity/sx9310.c
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-sx9310 b/Documentation/ABI/testing/sysfs-bus-iio-sx9310
> new file mode 100644
> index 00000000000000..3ac7759013e5c4
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-iio-sx9310
> @@ -0,0 +1,10 @@
> +What: /sys/bus/iio/devices/iio:deviceX/in_proximity3_comb_raw
> +Date: February 2019
> +KernelVersion: 5.6
> +Contact: Daniel Campello <campello@chromium.org>
> +Description:
> + Proximity measurement indicating that some object is
> + near the combined sensor. The combined sensor presents
> + proximity measurements constructed by hardware by
> + combining measurements taken from a given set of
> + physical sensors.
> diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig
> index d53601447da433..7627c40a707221 100644
> --- a/drivers/iio/proximity/Kconfig
> +++ b/drivers/iio/proximity/Kconfig
> @@ -86,6 +86,19 @@ config SRF04
> To compile this driver as a module, choose M here: the
> module will be called srf04.
>
> +config SX9310
> + tristate "SX9310/SX9311 Semtech proximity sensor"
> + select IIO_BUFFER
> + select IIO_TRIGGERED_BUFFER
> + select REGMAP_I2C
> + depends on I2C
> + help
> + Say Y here to build a driver for Semtech's SX9310/SX9311 capacitive
> + proximity/button sensor.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called sx9310.
> +
> config SX9500
> tristate "SX9500 Semtech proximity sensor"
> select IIO_BUFFER
> diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile
> index 0bb5f9de13d657..b7ebd94a1bb6ed 100644
> --- a/drivers/iio/proximity/Makefile
> +++ b/drivers/iio/proximity/Makefile
> @@ -11,6 +11,7 @@ obj-$(CONFIG_MB1232) += mb1232.o
> obj-$(CONFIG_RFD77402) += rfd77402.o
> obj-$(CONFIG_SRF04) += srf04.o
> obj-$(CONFIG_SRF08) += srf08.o
> +obj-$(CONFIG_SX9310) += sx9310.o
> obj-$(CONFIG_SX9500) += sx9500.o
> obj-$(CONFIG_VL53L0X_I2C) += vl53l0x-i2c.o
>
> diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
> new file mode 100644
> index 00000000000000..d161f3061e353d
> --- /dev/null
> +++ b/drivers/iio/proximity/sx9310.c
> @@ -0,0 +1,1069 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright 2018 Google LLC.
> + *
> + * Driver for Semtech's SX9310/SX9311 capacitive proximity/button solution.
> + * Based on SX9500 driver and Semtech driver using the input framework
> + * <https://my.syncplicity.com/share/teouwsim8niiaud/
> + * linux-driver-SX9310_NoSmartHSensing>.
> + * Reworked April 2019 by Evan Green <evgreen@chromium.org>
> + * and January 2020 by Daniel Campello <campello@chromium.org>
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/delay.h>
> +#include <linux/i2c.h>
> +#include <linux/irq.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/pm.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/events.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/iio/trigger.h>
> +#include <linux/iio/triggered_buffer.h>
> +#include <linux/iio/trigger_consumer.h>
> +
> +/* Register definitions. */
> +#define SX9310_REG_IRQ_SRC 0x00
> +#define SX9310_REG_STAT0 0x01
> +#define SX9310_REG_STAT1 0x02
> +#define SX9310_REG_IRQ_MSK 0x03
> +#define SX9310_CONVDONE_IRQ BIT(3)
> +#define SX9310_FAR_IRQ BIT(5)
> +#define SX9310_CLOSE_IRQ BIT(6)
> +#define SX9310_EVENT_IRQ (SX9310_FAR_IRQ | \
> + SX9310_CLOSE_IRQ)
> +#define SX9310_REG_IRQ_FUNC 0x04
> +
> +#define SX9310_REG_PROX_CTRL0 0x10
> +#define SX9310_REG_PROX_CTRL0_PROXSTAT2 0x10
> +#define SX9310_REG_PROX_CTRL0_EN_MASK 0x0F
> +#define SX9310_REG_PROX_CTRL1 0x11
> +#define SX9310_REG_PROX_CTRL2 0x12
> +#define SX9310_REG_PROX_CTRL2_COMBMODE_ALL 0x80
> +#define SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC 0x04
> +#define SX9310_REG_PROX_CTRL3 0x13
> +#define SX9310_REG_PROX_CTRL3_GAIN0_X8 0x0c
> +#define SX9310_REG_PROX_CTRL3_GAIN12_X4 0x02
> +#define SX9310_REG_PROX_CTRL4 0x14
> +#define SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST 0x07
> +#define SX9310_REG_PROX_CTRL5 0x15
> +#define SX9310_REG_PROX_CTRL5_RANGE_SMALL 0xc0
> +#define SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1 0x04
> +#define SX9310_REG_PROX_CTRL5_RAWFILT_1P25 0x02
> +#define SX9310_REG_PROX_CTRL6 0x16
> +#define SX9310_REG_PROX_CTRL6_COMP_COMMON 0x20
> +#define SX9310_REG_PROX_CTRL7 0x17
> +#define SX9310_REG_PROX_CTRL7_AVGNEGFILT_2 0x08
> +#define SX9310_REG_PROX_CTRL7_AVGPOSFILT_512 0x05
> +#define SX9310_REG_PROX_CTRL8 0x18
> +#define SX9310_REG_PROX_CTRL9 0x19
> +#define SX9310_REG_PROX_CTRL8_9_PTHRESH12_28 0x40
> +#define SX9310_REG_PROX_CTRL8_9_PTHRESH_96 0x88
> +#define SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900 0x03
> +#define SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500 0x05
> +#define SX9310_REG_PROX_CTRL10 0x1a
> +#define SX9310_REG_PROX_CTRL10_HYST_6PCT 0x10
> +#define SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_8 0x12
> +#define SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_8 0x03
> +#define SX9310_REG_PROX_CTRL11 0x1b
> +#define SX9310_REG_PROX_CTRL12 0x1c
> +#define SX9310_REG_PROX_CTRL13 0x1d
> +#define SX9310_REG_PROX_CTRL14 0x1e
> +#define SX9310_REG_PROX_CTRL15 0x1f
> +#define SX9310_REG_PROX_CTRL16 0x20
> +#define SX9310_REG_PROX_CTRL17 0x21
> +#define SX9310_REG_PROX_CTRL18 0x22
> +#define SX9310_REG_PROX_CTRL19 0x23
> +#define SX9310_REG_SAR_CTRL0 0x2a
> +#define SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES 0x40
> +#define SX9310_REG_SAR_CTRL0_SARHYST_8 0x10
> +#define SX9310_REG_SAR_CTRL1 0x2b
> +/* Each increment of the slope register is 0.0078125. */
> +#define SX9310_REG_SAR_CTRL1_SLOPE(_hnslope) (_hnslope / 78125)
> +#define SX9310_REG_SAR_CTRL2 0x2c
> +#define SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT 0x3c
> +
> +#define SX9310_REG_SENSOR_SEL 0x30
> +
> +#define SX9310_REG_USE_MSB 0x31
> +#define SX9310_REG_USE_LSB 0x32
> +
> +#define SX9310_REG_AVG_MSB 0x33
> +#define SX9310_REG_AVG_LSB 0x34
> +
> +#define SX9310_REG_DIFF_MSB 0x35
> +#define SX9310_REG_DIFF_LSB 0x36
> +
> +#define SX9310_REG_OFFSET_MSB 0x37
> +#define SX9310_REG_OFFSET_LSB 0x38
> +
> +#define SX9310_REG_SAR_MSB 0x39
> +#define SX9310_REG_SAR_LSB 0x3a
> +
> +#define SX9310_REG_I2CADDR 0x40
> +#define SX9310_REG_PAUSE 0x41
> +#define SX9310_REG_WHOAMI 0x42
> +#define SX9310_WHOAMI_VALUE 0x01
> +#define SX9311_WHOAMI_VALUE 0x02
> +
> +#define SX9310_REG_RESET 0x7f
> +#define SX9310_SOFT_RESET 0xde
> +
> +#define SX9310_SCAN_PERIOD_MASK GENMASK(7, 4)
> +#define SX9310_SCAN_PERIOD_SHIFT 4
> +
> +#define SX9310_COMPSTAT_MASK GENMASK(3, 0)
> +
> +/* 4 hardware channels, as defined in STAT0: COMB, CS2, CS1 and CS0. */
> +#define SX9310_NUM_CHANNELS 4
> +#define SX9310_CHAN_ENABLED_MASK GENMASK(3, 0)
> +
> +struct sx9310_data {
> + /* Serialize access to registers and channel configuration */
> + struct mutex mutex;
> + struct i2c_client *client;
> + struct iio_trigger *trig;
> + struct regmap *regmap;
> + /*
> + * Last reading of the proximity status for each channel.
> + * We only send an event to user space when this changes.
> + */
> + bool prox_stat[SX9310_NUM_CHANNELS];
> + bool trigger_enabled;
> + __be16 buffer[SX9310_NUM_CHANNELS +
> + 4]; /* 64-bit data + 64-bit timestamp */
> + /* Remember enabled channels and sample rate during suspend. */
> + unsigned int suspend_ctrl0;
> + struct completion completion;
> + unsigned int chan_read, chan_event;
> + int channel_users[SX9310_NUM_CHANNELS];
> + int whoami;
> +};
> +
> +static const struct iio_event_spec sx9310_events[] = {
> + {
> + .type = IIO_EV_TYPE_THRESH,
> + .dir = IIO_EV_DIR_EITHER,
> + .mask_separate = BIT(IIO_EV_INFO_ENABLE),
> + },
> +};
> +
> +#define SX9310_NAMED_CHANNEL(idx, name) \
> + { \
> + .type = IIO_PROXIMITY, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
> + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
> + .indexed = 1, \
> + .channel = idx, \
> + .extend_name = name, \
> + .address = SX9310_REG_DIFF_MSB, \
> + .event_spec = sx9310_events, \
> + .num_event_specs = ARRAY_SIZE(sx9310_events), \
> + .scan_index = idx, \
> + .scan_type = { \
> + .sign = 's', \
> + .realbits = 12, \
> + .storagebits = 16, \
> + .endianness = IIO_BE, \
> + }, \
> + }
> +#define SX9310_CHANNEL(idx) SX9310_NAMED_CHANNEL(idx, NULL)
> +
> +static const struct iio_chan_spec sx9310_channels[] = {
> + SX9310_CHANNEL(0), /* CS0 */
> + SX9310_CHANNEL(1), /* CS1 */
> + SX9310_CHANNEL(2), /* CS2 */
> + SX9310_NAMED_CHANNEL(3, "comb"), /* COMB */
> +
> + IIO_CHAN_SOFT_TIMESTAMP(4),
> +};
> +
> +/*
> + * Each entry contains the integer part (val) and the fractional part, in micro
> + * seconds. It conforms to the IIO output IIO_VAL_INT_PLUS_MICRO.
> + */
> +static const struct {
> + int val;
> + int val2;
> +} sx9310_samp_freq_table[] = {
> + { 500, 0 }, /* 0000: Min (no idle time) */
> + { 66, 666666 }, /* 0001: 15 ms */
> + { 33, 333333 }, /* 0010: 30 ms (Typ.) */
> + { 22, 222222 }, /* 0011: 45 ms */
> + { 16, 666666 }, /* 0100: 60 ms */
> + { 11, 111111 }, /* 0101: 90 ms */
> + { 8, 333333 }, /* 0110: 120 ms */
> + { 5, 0 }, /* 0111: 200 ms */
> + { 2, 500000 }, /* 1000: 400 ms */
> + { 1, 666666 }, /* 1001: 600 ms */
> + { 1, 250000 }, /* 1010: 800 ms */
> + { 1, 0 }, /* 1011: 1 s */
> + { 0, 500000 }, /* 1100: 2 s */
> + { 0, 333333 }, /* 1101: 3 s */
> + { 0, 250000 }, /* 1110: 4 s */
> + { 0, 200000 }, /* 1111: 5 s */
> +};
> +static const unsigned int sx9310_scan_period_table[] = {
> + 2, 15, 30, 45, 60, 90, 120, 200,
> + 400, 600, 800, 1000, 2000, 3000, 4000, 5000,
> +};
> +
> +static ssize_t sx9310_show_samp_freq_avail(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + size_t len = 0;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(sx9310_samp_freq_table); i++)
> + len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%d ",
> + sx9310_samp_freq_table[i].val,
> + sx9310_samp_freq_table[i].val2);
> + buf[len - 1] = '\n';
> + return len;
> +}
> +static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(sx9310_show_samp_freq_avail);
> +
> +static const struct regmap_range sx9310_writable_reg_ranges[] = {
> + regmap_reg_range(SX9310_REG_IRQ_MSK, SX9310_REG_IRQ_FUNC),
> + regmap_reg_range(SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL19),
> + regmap_reg_range(SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL2),
> + regmap_reg_range(SX9310_REG_SENSOR_SEL, SX9310_REG_SENSOR_SEL),
> + regmap_reg_range(SX9310_REG_OFFSET_MSB, SX9310_REG_OFFSET_LSB),
> + regmap_reg_range(SX9310_REG_PAUSE, SX9310_REG_PAUSE),
> + regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET),
> +};
> +
> +static const struct regmap_access_table sx9310_writeable_regs = {
> + .yes_ranges = sx9310_writable_reg_ranges,
> + .n_yes_ranges = ARRAY_SIZE(sx9310_writable_reg_ranges),
> +};
> +
> +static const struct regmap_range sx9310_readable_reg_ranges[] = {
> + regmap_reg_range(SX9310_REG_IRQ_SRC, SX9310_REG_IRQ_FUNC),
> + regmap_reg_range(SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL19),
> + regmap_reg_range(SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL2),
> + regmap_reg_range(SX9310_REG_SENSOR_SEL, SX9310_REG_SAR_LSB),
> + regmap_reg_range(SX9310_REG_I2CADDR, SX9310_REG_WHOAMI),
> + regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET),
> +};
> +
> +static const struct regmap_access_table sx9310_readable_regs = {
> + .yes_ranges = sx9310_readable_reg_ranges,
> + .n_yes_ranges = ARRAY_SIZE(sx9310_readable_reg_ranges),
> +};
> +
> +static const struct regmap_range sx9310_volatile_reg_ranges[] = {
> + regmap_reg_range(SX9310_REG_IRQ_SRC, SX9310_REG_STAT1),
> + regmap_reg_range(SX9310_REG_USE_MSB, SX9310_REG_DIFF_LSB),
> + regmap_reg_range(SX9310_REG_SAR_MSB, SX9310_REG_SAR_LSB),
> + regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET),
> +};
> +
> +static const struct regmap_access_table sx9310_volatile_regs = {
> + .yes_ranges = sx9310_volatile_reg_ranges,
> + .n_yes_ranges = ARRAY_SIZE(sx9310_volatile_reg_ranges),
> +};
> +
> +static const struct regmap_config sx9310_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> +
> + .max_register = SX9310_REG_RESET,
> + .cache_type = REGCACHE_RBTREE,
> +
> + .wr_table = &sx9310_writeable_regs,
> + .rd_table = &sx9310_readable_regs,
> + .volatile_table = &sx9310_volatile_regs,
> +};
> +
> +static int sx9310_update_chan_en(struct sx9310_data *data,
> + unsigned int chan_read,
> + unsigned int chan_event)
> +{
> + int ret;
> +
> + if ((data->chan_read | data->chan_event) != (chan_read | chan_event)) {
> + ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
> + SX9310_CHAN_ENABLED_MASK,
> + chan_read | chan_event);
> + if (ret)
> + return ret;
> + }
> + data->chan_read = chan_read;
> + data->chan_event = chan_event;
> + return 0;
> +}
> +
> +static int sx9310_get_read_channel(struct sx9310_data *data, int channel)
> +{
> + return sx9310_update_chan_en(data, data->chan_read | BIT(channel),
> + data->chan_event);
> +}
> +
> +static int sx9310_put_read_channel(struct sx9310_data *data, int channel)
> +{
> + return sx9310_update_chan_en(data, data->chan_read & ~BIT(channel),
> + data->chan_event);
> +}
> +
> +static int sx9310_get_event_channel(struct sx9310_data *data, int channel)
> +{
> + return sx9310_update_chan_en(data, data->chan_read,
> + data->chan_event | BIT(channel));
> +}
> +
> +static int sx9310_put_event_channel(struct sx9310_data *data, int channel)
> +{
> + return sx9310_update_chan_en(data, data->chan_read,
> + data->chan_event & ~BIT(channel));
> +}
> +
> +static int sx9310_enable_irq(struct sx9310_data *data, unsigned int irq)
> +{
> + return regmap_update_bits(data->regmap, SX9310_REG_IRQ_MSK, irq, irq);
> +}
> +
> +static int sx9310_disable_irq(struct sx9310_data *data, unsigned int irq)
> +{
> + return regmap_update_bits(data->regmap, SX9310_REG_IRQ_MSK, irq, 0);
> +}
> +
> +static int sx9310_read_prox_data(struct sx9310_data *data,
> + const struct iio_chan_spec *chan, __be16 *val)
> +{
> + int ret;
> +
> + ret = regmap_write(data->regmap, SX9310_REG_SENSOR_SEL, chan->channel);
> + if (ret < 0)
> + return ret;
> +
> + return regmap_bulk_read(data->regmap, chan->address, val, 2);
> +}
> +
> +/*
> + * If we have no interrupt support, we have to wait for a scan period
> + * after enabling a channel to get a result.
> + */
> +static int sx9310_wait_for_sample(struct sx9310_data *data)
> +{
> + int ret;
> + unsigned int val;
> +
> + ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &val);
> + if (ret < 0)
> + return ret;
> +
> + val = (val & SX9310_SCAN_PERIOD_MASK) >> SX9310_SCAN_PERIOD_SHIFT;
> +
> + msleep(sx9310_scan_period_table[val]);
> +
> + return 0;
> +}
> +
> +static int sx9310_read_proximity(struct sx9310_data *data,
> + const struct iio_chan_spec *chan, int *val)
> +{
> + int ret = 0;
> + __be16 rawval;
> +
> + mutex_lock(&data->mutex);
> +
> + ret = sx9310_get_read_channel(data, chan->channel);
> + if (ret < 0)
> + goto out;
> +
> + ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ);
> + if (ret < 0)
> + goto out_put_channel;
> +
> + mutex_unlock(&data->mutex);
> +
> + if (data->client->irq > 0) {
> + ret = wait_for_completion_interruptible(&data->completion);
> + reinit_completion(&data->completion);
> + } else {
> + ret = sx9310_wait_for_sample(data);
> + }
> +
> + mutex_lock(&data->mutex);
> +
> + if (ret < 0)
> + goto out_disable_irq;
> +
> + ret = sx9310_read_prox_data(data, chan, &rawval);
> + if (ret < 0)
> + goto out_disable_irq;
> +
> + *val = sign_extend32(be16_to_cpu(rawval),
> + (chan->address == SX9310_REG_DIFF_MSB ? 11 : 15));
> +
> + ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
> + if (ret < 0)
> + goto out_put_channel;
> +
> + ret = sx9310_put_read_channel(data, chan->channel);
> + if (ret < 0)
> + goto out;
> +
> + mutex_unlock(&data->mutex);
> +
> + return IIO_VAL_INT;
> +
> +out_disable_irq:
> + sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
> +out_put_channel:
> + sx9310_put_read_channel(data, chan->channel);
> +out:
> + mutex_unlock(&data->mutex);
> +
> + return ret;
> +}
> +
> +static int sx9310_read_samp_freq(struct sx9310_data *data, int *val, int *val2)
> +{
> + unsigned int regval;
> + int ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &regval);
> +
> + if (ret < 0)
> + return ret;
> +
> + regval = (regval & SX9310_SCAN_PERIOD_MASK) >> SX9310_SCAN_PERIOD_SHIFT;
> + *val = sx9310_samp_freq_table[regval].val;
> + *val2 = sx9310_samp_freq_table[regval].val2;
> +
> + return IIO_VAL_INT_PLUS_MICRO;
> +}
> +
> +static int sx9310_read_raw(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan, int *val,
> + int *val2, long mask)
> +{
> + struct sx9310_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + if (chan->type != IIO_PROXIMITY)
> + return -EINVAL;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + ret = iio_device_claim_direct_mode(indio_dev);
> + if (ret)
> + return ret;
> +
> + ret = sx9310_read_proximity(data, chan, val);
> + iio_device_release_direct_mode(indio_dev);
> + return ret;
> + case IIO_CHAN_INFO_SAMP_FREQ:
> + return sx9310_read_samp_freq(data, val, val2);
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int sx9310_set_samp_freq(struct sx9310_data *data, int val, int val2)
> +{
> + int i, ret;
> +
> + for (i = 0; i < ARRAY_SIZE(sx9310_samp_freq_table); i++)
> + if (val == sx9310_samp_freq_table[i].val &&
> + val2 == sx9310_samp_freq_table[i].val2)
> + break;
> +
> + if (i == ARRAY_SIZE(sx9310_samp_freq_table))
> + return -EINVAL;
> +
> + mutex_lock(&data->mutex);
> +
> + ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
> + SX9310_SCAN_PERIOD_MASK,
> + i << SX9310_SCAN_PERIOD_SHIFT);
> +
> + mutex_unlock(&data->mutex);
> +
> + return ret;
> +}
> +
> +static int sx9310_write_raw(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan, int val, int val2,
> + long mask)
> +{
> + struct sx9310_data *data = iio_priv(indio_dev);
> +
> + if (chan->type != IIO_PROXIMITY)
> + return -EINVAL;
> +
> + if (mask != IIO_CHAN_INFO_SAMP_FREQ)
> + return -EINVAL;
> +
> + return sx9310_set_samp_freq(data, val, val2);
> +}
> +
> +static irqreturn_t sx9310_irq_handler(int irq, void *private)
> +{
> + struct iio_dev *indio_dev = private;
> + struct sx9310_data *data = iio_priv(indio_dev);
> +
> + if (data->trigger_enabled)
> + iio_trigger_poll(data->trig);
> +
> + /*
> + * Even if no event is enabled, we need to wake the thread to
> + * clear the interrupt state by reading SX9310_REG_IRQ_SRC. It
> + * is not possible to do that here because regmap_read takes a
> + * mutex.
> + */
> + return IRQ_WAKE_THREAD;
> +}
> +
> +static void sx9310_push_events(struct iio_dev *indio_dev)
> +{
> + int ret;
> + unsigned int val, chan;
> + struct sx9310_data *data = iio_priv(indio_dev);
> + s64 timestamp = iio_get_time_ns(indio_dev);
> +
> + /* Read proximity state on all channels */
> + ret = regmap_read(data->regmap, SX9310_REG_STAT0, &val);
> + if (ret < 0) {
> + dev_err(&data->client->dev, "i2c transfer error in irq\n");
> + return;
> + }
> +
> + for (chan = 0; chan < SX9310_NUM_CHANNELS; chan++) {
> + int dir;
> + u64 ev;
> + bool new_prox = val & BIT(chan);
> +
> + if (!(data->chan_event & BIT(chan)))
> + continue;
> + if (new_prox == data->prox_stat[chan])
> + /* No change on this channel. */
> + continue;
> +
> + dir = new_prox ? IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING;
> + ev = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, chan,
> + IIO_EV_TYPE_THRESH, dir);
> +
> + iio_push_event(indio_dev, ev, timestamp);
> + data->prox_stat[chan] = new_prox;
> + }
> +}
> +
> +static irqreturn_t sx9310_irq_thread_handler(int irq, void *private)
> +{
> + struct iio_dev *indio_dev = private;
> + struct sx9310_data *data = iio_priv(indio_dev);
> + int ret;
> + unsigned int val;
> +
> + mutex_lock(&data->mutex);
> +
> + ret = regmap_read(data->regmap, SX9310_REG_IRQ_SRC, &val);
> + if (ret < 0) {
> + dev_err(&data->client->dev, "i2c transfer error in irq\n");
> + goto out;
> + }
> +
> + if (val & SX9310_EVENT_IRQ)
> + sx9310_push_events(indio_dev);
> +
> + if (val & SX9310_CONVDONE_IRQ)
> + complete(&data->completion);
> +
> +out:
> + mutex_unlock(&data->mutex);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int sx9310_read_event_config(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan,
> + enum iio_event_type type,
> + enum iio_event_direction dir)
> +{
> + struct sx9310_data *data = iio_priv(indio_dev);
> +
> + return !!(data->chan_event & BIT(chan->channel));
> +}
> +
> +static int sx9310_write_event_config(struct iio_dev *indio_dev,
> + const struct iio_chan_spec *chan,
> + enum iio_event_type type,
> + enum iio_event_direction dir, int state)
> +{
> + struct sx9310_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + /* If the state hasn't changed, there's nothing to do. */
> + if (!!(data->chan_event & BIT(chan->channel)) == state)
> + return 0;
> +
> + mutex_lock(&data->mutex);
> + if (state) {
> + ret = sx9310_get_event_channel(data, chan->channel);
> + if (ret < 0)
> + goto out_unlock;
> + if (!(data->chan_event & ~BIT(chan->channel))) {
> + ret = sx9310_enable_irq(data, SX9310_EVENT_IRQ);
> + if (ret < 0)
> + sx9310_put_event_channel(data, chan->channel);
> + }
> + } else {
> + ret = sx9310_put_event_channel(data, chan->channel);
> + if (ret < 0)
> + goto out_unlock;
> + if (!data->chan_event) {
> + ret = sx9310_disable_irq(data, SX9310_EVENT_IRQ);
> + if (ret < 0)
> + sx9310_get_event_channel(data, chan->channel);
> + }
> + }
> +
> +out_unlock:
> + mutex_unlock(&data->mutex);
> + return ret;
> +}
> +
> +static struct attribute *sx9310_attributes[] = {
> + &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group sx9310_attribute_group = {
> + .attrs = sx9310_attributes,
> +};
> +
> +static const struct iio_info sx9310_info = {
> + .attrs = &sx9310_attribute_group,
> + .read_raw = sx9310_read_raw,
> + .write_raw = sx9310_write_raw,
> + .read_event_config = sx9310_read_event_config,
> + .write_event_config = sx9310_write_event_config,
> +};
> +
> +static int sx9310_set_trigger_state(struct iio_trigger *trig, bool state)
> +{
> + struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
> + struct sx9310_data *data = iio_priv(indio_dev);
> + int ret = 0;
> +
> + mutex_lock(&data->mutex);
> +
> + if (state)
> + ret = sx9310_enable_irq(data, SX9310_CONVDONE_IRQ);
> + else if (!data->chan_read)
> + ret = sx9310_disable_irq(data, SX9310_CONVDONE_IRQ);
> + if (ret < 0)
> + goto out;
> +
> + data->trigger_enabled = state;
> +
> +out:
> + mutex_unlock(&data->mutex);
> +
> + return ret;
> +}
> +
> +static const struct iio_trigger_ops sx9310_trigger_ops = {
> + .set_trigger_state = sx9310_set_trigger_state,
> +};
> +
> +static irqreturn_t sx9310_trigger_handler(int irq, void *private)
> +{
> + struct iio_poll_func *pf = private;
> + struct iio_dev *indio_dev = pf->indio_dev;
> + struct sx9310_data *data = iio_priv(indio_dev);
> + __be16 val;
> + int bit, ret, i = 0;
> +
> + mutex_lock(&data->mutex);
> +
> + for_each_set_bit(bit, indio_dev->active_scan_mask,
> + indio_dev->masklength) {
> + ret = sx9310_read_prox_data(data, &indio_dev->channels[bit],
> + &val);
> + if (ret < 0)
> + goto out;
> +
> + data->buffer[i++] = val;
> + }
> +
> + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
> + pf->timestamp);
> +
> +out:
> + mutex_unlock(&data->mutex);
> +
> + iio_trigger_notify_done(indio_dev->trig);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int sx9310_buffer_preenable(struct iio_dev *indio_dev)
> +{
> + struct sx9310_data *data = iio_priv(indio_dev);
> + unsigned int channels = 0;
> + int bit, ret;
> +
> + mutex_lock(&data->mutex);
> + for_each_set_bit(bit, indio_dev->active_scan_mask,
> + indio_dev->masklength)
> + channels |= BIT(indio_dev->channels[bit].channel);
> +
> + ret = sx9310_update_chan_en(data, channels, data->chan_event);
> + mutex_unlock(&data->mutex);
> + return ret;
> +}
> +
> +static int sx9310_buffer_postdisable(struct iio_dev *indio_dev)
> +{
> + struct sx9310_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + mutex_lock(&data->mutex);
> + ret = sx9310_update_chan_en(data, 0, data->chan_event);
> + mutex_unlock(&data->mutex);
> + return ret;
> +}
> +
> +static const struct iio_buffer_setup_ops sx9310_buffer_setup_ops = {
> + .preenable = sx9310_buffer_preenable,
> + .postenable = iio_triggered_buffer_postenable,
> + .predisable = iio_triggered_buffer_predisable,
> + .postdisable = sx9310_buffer_postdisable,
> +};
> +
> +struct sx9310_reg_default {
> + u8 reg;
> + u8 def;
> +};
> +
> +#define SX_INIT(_reg, _def) \
> + { \
> + .reg = SX9310_REG_##_reg, \
> + .def = _def, \
> + }
> +
> +static const struct sx9310_reg_default sx9310_default_regs[] = {
> + SX_INIT(IRQ_MSK, 0x00),
> + SX_INIT(IRQ_FUNC, 0x00),
> + /*
> + * The lower 4 bits should not be set as it enable sensors measurements.
> + * Turning the detection on before the configuration values are set to
> + * good values can cause the device to return erroneous readings.
> + */
> + SX_INIT(PROX_CTRL0, SX9310_REG_PROX_CTRL0_PROXSTAT2),
> + SX_INIT(PROX_CTRL1, 0x00),
> + SX_INIT(PROX_CTRL2, SX9310_REG_PROX_CTRL2_COMBMODE_ALL |
> + SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC),
> + SX_INIT(PROX_CTRL3, SX9310_REG_PROX_CTRL3_GAIN0_X8 |
> + SX9310_REG_PROX_CTRL3_GAIN12_X4),
> + SX_INIT(PROX_CTRL4, SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST),
> + SX_INIT(PROX_CTRL5, SX9310_REG_PROX_CTRL5_RANGE_SMALL |
> + SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1 |
> + SX9310_REG_PROX_CTRL5_RAWFILT_1P25),
> + SX_INIT(PROX_CTRL6, SX9310_REG_PROX_CTRL6_COMP_COMMON),
> + SX_INIT(PROX_CTRL7, SX9310_REG_PROX_CTRL7_AVGNEGFILT_2 |
> + SX9310_REG_PROX_CTRL7_AVGPOSFILT_512),
> + SX_INIT(PROX_CTRL8, SX9310_REG_PROX_CTRL8_9_PTHRESH_96 |
> + SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500),
> + SX_INIT(PROX_CTRL9, SX9310_REG_PROX_CTRL8_9_PTHRESH12_28 |
> + SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900),
> + SX_INIT(PROX_CTRL10, SX9310_REG_PROX_CTRL10_HYST_6PCT |
> + SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_8 |
> + SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_8),
> + SX_INIT(PROX_CTRL11, 0x00),
> + SX_INIT(PROX_CTRL12, 0x00),
> + SX_INIT(PROX_CTRL13, 0x00),
> + SX_INIT(PROX_CTRL14, 0x00),
> + SX_INIT(PROX_CTRL15, 0x00),
> + SX_INIT(PROX_CTRL16, 0x00),
> + SX_INIT(PROX_CTRL17, 0x00),
> + SX_INIT(PROX_CTRL18, 0x00),
> + SX_INIT(PROX_CTRL19, 0x00),
> + SX_INIT(SAR_CTRL0, SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES |
> + SX9310_REG_SAR_CTRL0_SARHYST_8),
> + SX_INIT(SAR_CTRL1, SX9310_REG_SAR_CTRL1_SLOPE(10781250)),
> + SX_INIT(SAR_CTRL2, SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT),
> +};
> +
> +/* Activate all channels and perform an initial compensation. */
> +static int sx9310_init_compensation(struct iio_dev *indio_dev)
> +{
> + struct sx9310_data *data = iio_priv(indio_dev);
> + int i, ret;
> + unsigned int val;
> + unsigned int ctrl0;
> +
> + ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &ctrl0);
> + if (ret < 0)
> + return ret;
> +
> + /* run the compensation phase on all channels */
> + ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0,
> + ctrl0 | SX9310_REG_PROX_CTRL0_EN_MASK);
> + if (ret < 0)
> + return ret;
> +
> + for (i = 100; i >= 0; i--) {
> + msleep(20);
> + ret = regmap_read(data->regmap, SX9310_REG_STAT1, &val);
> + if (ret < 0)
> + goto out;
> + if (!(val & SX9310_COMPSTAT_MASK))
> + break;
> + }
> +
> + if (i < 0) {
> + dev_err(&data->client->dev,
> + "initial compensation timed out: 0x%02x", val);
> + ret = -ETIMEDOUT;
> + }
> +
> +out:
> + regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0);
> + return ret;
> +}
> +
> +static int sx9310_init_device(struct iio_dev *indio_dev)
> +{
> + struct sx9310_data *data = iio_priv(indio_dev);
> + const struct sx9310_reg_default *initval;
> + int ret;
> + unsigned int i, val;
> +
> + ret = regmap_write(data->regmap, SX9310_REG_RESET, SX9310_SOFT_RESET);
> + if (ret < 0)
> + return ret;
> +
> + usleep_range(1000, 2000); /* power-up time is ~1ms. */
> +
> + /* Clear reset interrupt state by reading SX9310_REG_IRQ_SRC. */
> + ret = regmap_read(data->regmap, SX9310_REG_IRQ_SRC, &val);
> + if (ret < 0)
> + return ret;
> +
> + /* Program some sane defaults. */
> + for (i = 0; i < ARRAY_SIZE(sx9310_default_regs); i++) {
> + initval = &sx9310_default_regs[i];
> + ret = regmap_write(data->regmap, initval->reg, initval->def);
> + if (ret < 0)
> + return ret;
> + }
> +
> + return sx9310_init_compensation(indio_dev);
> +}
> +
> +static int sx9310_set_indio_dev_name(struct device *dev,
> + struct iio_dev *indio_dev,
> + const struct i2c_device_id *id, int whoami)
> +{
> + const struct acpi_device_id *acpi_id;
> +
> + /* id will be NULL when enumerated via ACPI */
> + if (id) {
> + if (id->driver_data != whoami)
> + dev_err(dev, "WHOAMI does not match i2c_device_id: %s",
> + id->name);
> + } else if (ACPI_HANDLE(dev)) {
> + acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
> + if (!acpi_id)
> + return -ENODEV;
> + if (acpi_id->driver_data != whoami)
> + dev_err(dev, "WHOAMI does not match acpi_device_id: %s",
> + acpi_id->id);
> + } else
> + return -ENODEV;
> +
> + switch (whoami) {
> + case SX9310_WHOAMI_VALUE:
> + indio_dev->name = "sx9310";
> + break;
> + case SX9311_WHOAMI_VALUE:
> + indio_dev->name = "sx9311";
> + break;
> + default:
> + dev_err(dev, "unexpected WHOAMI response: %u", whoami);
> + return -ENODEV;
> + }
> +
> + return 0;
> +}
> +
> +static int sx9310_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + int ret;
> + struct iio_dev *indio_dev;
> + struct sx9310_data *data;
> +
> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> + if (indio_dev == NULL)
> + return -ENOMEM;
> +
> + data = iio_priv(indio_dev);
> + data->client = client;
> + mutex_init(&data->mutex);
> + init_completion(&data->completion);
> +
> + data->regmap = devm_regmap_init_i2c(client, &sx9310_regmap_config);
> + if (IS_ERR(data->regmap))
> + return PTR_ERR(data->regmap);
> +
> + ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &data->whoami);
> + if (ret < 0) {
> + dev_err(&client->dev, "error in reading WHOAMI register: %d",
> + ret);
> + return ret;
> + }
> +
> + ret = sx9310_set_indio_dev_name(&client->dev, indio_dev, id,
> + data->whoami);
> + if (ret < 0)
> + return ret;
> +
> + ACPI_COMPANION_SET(&indio_dev->dev, ACPI_COMPANION(&client->dev));
> + indio_dev->dev.parent = &client->dev;
> + indio_dev->channels = sx9310_channels;
> + indio_dev->num_channels = ARRAY_SIZE(sx9310_channels);
> + indio_dev->info = &sx9310_info;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + i2c_set_clientdata(client, indio_dev);
> +
> + ret = sx9310_init_device(indio_dev);
> + if (ret < 0)
> + return ret;
> +
> + if (client->irq) {
> + ret = devm_request_threaded_irq(&client->dev, client->irq,
> + sx9310_irq_handler,
> + sx9310_irq_thread_handler,
> + IRQF_TRIGGER_LOW | IRQF_ONESHOT,
> + "sx9310_event", indio_dev);
> + if (ret < 0)
> + return ret;
> +
> + data->trig =
> + devm_iio_trigger_alloc(&client->dev, "%s-dev%d",
> + indio_dev->name, indio_dev->id);
> + if (!data->trig)
> + return -ENOMEM;
> +
> + data->trig->dev.parent = &client->dev;
> + data->trig->ops = &sx9310_trigger_ops;
> + iio_trigger_set_drvdata(data->trig, indio_dev);
> +
> + ret = devm_iio_trigger_register(&client->dev, data->trig);
> + if (ret)
> + return ret;
> + }
> +
> + ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev,
> + iio_pollfunc_store_time,
> + sx9310_trigger_handler,
> + &sx9310_buffer_setup_ops);
> + if (ret < 0)
> + return ret;
> +
> + return devm_iio_device_register(&client->dev, indio_dev);
> +}
> +
> +static int __maybe_unused sx9310_suspend(struct device *dev)
> +{
> + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> + struct sx9310_data *data = iio_priv(indio_dev);
> + u8 ctrl0;
> + int ret;
> +
> + disable_irq_nosync(data->client->irq);
> +
> + mutex_lock(&data->mutex);
> + ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0,
> + &data->suspend_ctrl0);
> +
> + if (ret)
> + goto out;
> +
> + ctrl0 = data->suspend_ctrl0 & ~SX9310_REG_PROX_CTRL0_EN_MASK;
> + ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0);
> + if (ret)
> + goto out;
> +
> + ret = regmap_write(data->regmap, SX9310_REG_PAUSE, 0);
> +
> +out:
> + mutex_unlock(&data->mutex);
> + return ret;
> +}
> +
> +static int __maybe_unused sx9310_resume(struct device *dev)
> +{
> + struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
> + struct sx9310_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + mutex_lock(&data->mutex);
> + ret = regmap_write(data->regmap, SX9310_REG_PAUSE, 1);
> + if (ret)
> + goto out;
> +
> + ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0,
> + data->suspend_ctrl0);
> +
> +out:
> + mutex_unlock(&data->mutex);
> +
> + enable_irq(data->client->irq);
> +
> + return ret;
> +}
> +
> +static const struct dev_pm_ops sx9310_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(sx9310_suspend, sx9310_resume)
> +};
> +
> +static const struct acpi_device_id sx9310_acpi_match[] = {
> + { "STH9310", SX9310_WHOAMI_VALUE },
> + { "STH9311", SX9311_WHOAMI_VALUE },
> + {},
> +};
> +MODULE_DEVICE_TABLE(acpi, sx9310_acpi_match);
> +
> +static const struct of_device_id sx9310_of_match[] = {
> + { .compatible = "semtech,sx9310" },
> + { .compatible = "semtech,sx9311" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, sx9310_of_match);
> +
> +static const struct i2c_device_id sx9310_id[] = {
> + { "sx9310", SX9310_WHOAMI_VALUE },
> + { "sx9311", SX9311_WHOAMI_VALUE },
> + {},
> +};
> +MODULE_DEVICE_TABLE(i2c, sx9310_id);
> +
> +static struct i2c_driver sx9310_driver = {
> + .driver = {
> + .name = "sx9310",
> + .acpi_match_table = ACPI_PTR(sx9310_acpi_match),
> + .of_match_table = of_match_ptr(sx9310_of_match),
> + .pm = &sx9310_pm_ops,
> + },
> + .probe = sx9310_probe,
> + .id_table = sx9310_id,
> +};
> +module_i2c_driver(sx9310_driver);
> +
> +MODULE_AUTHOR("Gwendal Grignou <gwendal@chromium.org>");
> +MODULE_AUTHOR("Daniel Campello <campello@chromium.org>");
> +MODULE_DESCRIPTION("Driver for Semtech SX9310/SX9311 proximity sensor");
> +MODULE_LICENSE("GPL v2");
> --
> 2.25.1.481.gfbce0eb801-goog
>

\
 
 \ /
  Last update: 2020-03-15 15:12    [W:0.065 / U:9.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site