lkml.org 
[lkml]   [2020]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net 2/3] arm64: dts: ls1043a-rdb: correct RGMII delay mode to rgmii-id
On Fri, Mar 13, 2020 at 02:04:24PM +0200, Madalin Bucur wrote:
> The correct setting for the RGMII ports on LS1043ARDB is to
> enable delay on both Rx and Tx so the interface mode used must
> be PHY_INTERFACE_MODE_RGMII_ID.
>
> Since commit 1b3047b5208a80 ("net: phy: realtek: add support for
> configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver
> has control over the RGMII RX delay and it is disabling it for
> RGMII_TXID. The LS1043ARDB uses two such PHYs in RGMII_ID mode but
> in the device tree the mode was described as "rgmii_txid".
> This issue was not apparent at the time as the PHY driver took the
> same action for RGMII_TXID and RGMII_ID back then but it became
> visible (RX no longer working) after the above patch.
>
> Changing the phy-connection-type to "rgmii-id" to address the issue.
>
> Fixes: bf02f2ffe59c ("arm64: dts: add LS1043A DPAA FMan support")
> Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Andrew

\
 
 \ /
  Last update: 2020-03-15 02:56    [W:0.063 / U:0.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site