[lkml]   [2020]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH net 3/3] arm64: dts: ls1046ardb: set RGMII interfaces to RGMII_ID mode
On Fri, Mar 13, 2020 at 02:04:25PM +0200, Madalin Bucur wrote:
> The correct setting for the RGMII ports on LS1046ARDB is to
> enable delay on both Rx and Tx so the interface mode used must
> Since commit 1b3047b5208a80 ("net: phy: realtek: add support for
> configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver
> has control over the RGMII RX delay and it is disabling it for
> RGMII_TXID. The LS1046ARDB uses two such PHYs in RGMII_ID mode but
> in the device tree the mode was described as "rgmii".
> Changing the phy-connection-type to "rgmii-id" to address the issue.
> Fixes: 3fa395d2c48a ("arm64: dts: add LS1046A DPAA FMan nodes")
> Signed-off-by: Madalin Bucur <>

Reviewed-by: Andrew Lunn <>


 \ /
  Last update: 2020-03-15 02:56    [W:0.062 / U:9.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site