lkml.org 
[lkml]   [2020]   [Mar]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] KVM: VMX: Condition ENCLS-exiting enabling on CPU support for SGX1
From
Date
On 12/03/20 19:04, Sean Christopherson wrote:
> Enable ENCLS-exiting (and thus set vmcs.ENCLS_EXITING_BITMAP) only if
> the CPU supports SGX1. Per Intel's SDM, all ENCLS leafs #UD if SGX1
> is not supported[*], i.e. intercepting ENCLS to inject a #UD is
> unnecessary.
>
> Avoiding ENCLS-exiting even when it is reported as supported by the CPU
> works around a reported issue where SGX is "hard" disabled after an S3
> suspend/resume cycle, i.e. CPUID.0x7.SGX=0 and the VMCS field/control
> are enumerated as unsupported. While the root cause of the S3 issue is
> unknown, it's definitely _not_ a KVM (or kernel) bug, i.e. this is a
> workaround for what is most likely a hardware or firmware issue. As a
> bonus side effect, KVM saves a VMWRITE when first preparing vmcs01 and
> vmcs02.
>
> Query CPUID directly instead of going through cpu_data() or cpu_has() to
> ensure KVM is trapping ENCLS when it's supported in hardware, e.g. even
> if X86_FEATURE_SGX1 (which doesn't yet exist in upstream) were disabled
> by the kernel/user.
>
> Note, SGX must be disabled in BIOS to take advantage of this workaround
>
> [*] The additional ENCLS CPUID check on SGX1 exists so that SGX can be
> globally "soft" disabled post-reset, e.g. if #MC bits in MCi_CTL are
> cleared. Soft disabled meaning disabling SGX without clearing the
> primary CPUID bit (in leaf 0x7) and without poking into non-SGX
> CPU paths, e.g. for the VMCS controls.
>
> Fixes: 0b665d304028 ("KVM: vmx: Inject #UD for SGX ENCLS instruction in guest")
> Reported-by: Toni Spets <toni.spets@iki.fi>
> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
> ---
>
> This seems somewhat premature given that we don't yet know if the observed
> behavior is a logic bug, a one off manufacturing defect, firmware specific,
> etc... On the other hand, the change is arguably an optimization
> irrespective of using it as a workaround.
>
> arch/x86/kvm/vmx/vmx.c | 10 ++++++++--
> 1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
> index 40b1e6138cd5..50cab98382e7 100644
> --- a/arch/x86/kvm/vmx/vmx.c
> +++ b/arch/x86/kvm/vmx/vmx.c
> @@ -2338,6 +2338,11 @@ static void hardware_disable(void)
> kvm_cpu_vmxoff();
> }
>
> +static bool cpu_has_sgx(void)
> +{
> + return cpuid_eax(0) >= 0x12 && (cpuid_eax(0x12) & BIT(0));
> +}
> +
> static __init int adjust_vmx_controls(u32 ctl_min, u32 ctl_opt,
> u32 msr, u32 *result)
> {
> @@ -2418,8 +2423,9 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
> SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE |
> SECONDARY_EXEC_PT_USE_GPA |
> SECONDARY_EXEC_PT_CONCEAL_VMX |
> - SECONDARY_EXEC_ENABLE_VMFUNC |
> - SECONDARY_EXEC_ENCLS_EXITING;
> + SECONDARY_EXEC_ENABLE_VMFUNC;
> + if (cpu_has_sgx())
> + opt2 |= SECONDARY_EXEC_ENCLS_EXITING;
> if (adjust_vmx_controls(min2, opt2,
> MSR_IA32_VMX_PROCBASED_CTLS2,
> &_cpu_based_2nd_exec_control) < 0)
>

Queued, thanks.

Paolo

\
 
 \ /
  Last update: 2020-03-15 02:39    [W:0.037 / U:2.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site