lkml.org 
[lkml]   [2020]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] phy: Add USB HSIC PHY driver for Marvell MMP3 SoC
From
Date
Hi,

On 09/03/20 6:28 pm, Lubomir Rintel wrote:
> Add PHY driver for the HSICs found on Marvell MMP3 SoC. The driver is
> rather straightforward -- the PHY essentially just needs to be enabled.
>
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> ---
> drivers/phy/marvell/Kconfig | 12 +++++
> drivers/phy/marvell/Makefile | 1 +
> drivers/phy/marvell/phy-mmp3-hsic.c | 82 +++++++++++++++++++++++++++++
> 3 files changed, 95 insertions(+)
> create mode 100644 drivers/phy/marvell/phy-mmp3-hsic.c
>
> diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
> index 8f6273c837ec3..6c96f2bf52665 100644
> --- a/drivers/phy/marvell/Kconfig
> +++ b/drivers/phy/marvell/Kconfig
> @@ -116,3 +116,15 @@ config PHY_MMP3_USB
> The PHY driver will be used by Marvell udc/ehci/otg driver.
>
> To compile this driver as a module, choose M here.
> +
> +config PHY_MMP3_HSIC
> + tristate "Marvell MMP3 USB HSIC PHY Driver"
> + depends on MACH_MMP3_DT || COMPILE_TEST
> + select GENERIC_PHY
> + help
> + Enable this to support Marvell MMP3 USB HSIC PHY driver for
> + Marvell MMP3 SoC. This driver will be used my the Marvell EHCI
> + driver to initialize the interface to internal USB HSIC
> + components on MMP3-based boards.
> +
> + To compile this driver as a module, choose M here.
> diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile
> index 5a106b1549f41..7f296ef028292 100644
> --- a/drivers/phy/marvell/Makefile
> +++ b/drivers/phy/marvell/Makefile
> @@ -3,6 +3,7 @@ obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
> obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
> obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
> obj-$(CONFIG_PHY_MMP3_USB) += phy-mmp3-usb.o
> +obj-$(CONFIG_PHY_MMP3_HSIC) += phy-mmp3-hsic.o
> obj-$(CONFIG_PHY_MVEBU_A3700_COMPHY) += phy-mvebu-a3700-comphy.o
> obj-$(CONFIG_PHY_MVEBU_A3700_UTMI) += phy-mvebu-a3700-utmi.o
> obj-$(CONFIG_PHY_MVEBU_A38X_COMPHY) += phy-armada38x-comphy.o
> diff --git a/drivers/phy/marvell/phy-mmp3-hsic.c b/drivers/phy/marvell/phy-mmp3-hsic.c
> new file mode 100644
> index 0000000000000..f7b430f6f6f05
> --- /dev/null
> +++ b/drivers/phy/marvell/phy-mmp3-hsic.c
> @@ -0,0 +1,82 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2020 Lubomir Rintel <lkundrak@v3.sk>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +
> +#define HSIC_CTRL 0x08
> +#define HSIC_ENABLE BIT(7)
> +#define PLL_BYPASS BIT(4)
> +
> +static int mmp3_hsic_phy_init(struct phy *phy)
> +{
> + void __iomem *base = phy_get_drvdata(phy);
> + u32 hsic_ctrl;
> +
> + hsic_ctrl = readl_relaxed(base + HSIC_CTRL);
> + hsic_ctrl |= HSIC_ENABLE;
> + hsic_ctrl |= PLL_BYPASS;
> + writel_relaxed(hsic_ctrl, base + HSIC_CTRL);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops mmp3_hsic_phy_ops = {
> + .init = mmp3_hsic_phy_init,
> + .owner = THIS_MODULE,
> +};
> +
> +static const struct of_device_id mmp3_hsic_phy_of_match[] = {
> + { .compatible = "marvell,mmp3-hsic-phy", },

Where is the binding documentation for this?

Thanks
Kishon

> + { },
> +};
> +MODULE_DEVICE_TABLE(of, mmp3_hsic_phy_of_match);
> +
> +static int mmp3_hsic_phy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct phy_provider *provider;
> + struct resource *resource;
> + void __iomem *base;
> + struct phy *phy;
> +
> + resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + base = devm_ioremap_resource(dev, resource);
> + if (IS_ERR(base)) {
> + dev_err(dev, "failed to remap PHY regs\n");
> + return PTR_ERR(base);
> + }
> +
> + phy = devm_phy_create(dev, NULL, &mmp3_hsic_phy_ops);
> + if (IS_ERR(phy)) {
> + dev_err(dev, "failed to create PHY\n");
> + return PTR_ERR(phy);
> + }
> +
> + phy_set_drvdata(phy, base);
> + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> + if (IS_ERR(provider)) {
> + dev_err(dev, "failed to register PHY provider\n");
> + return PTR_ERR(provider);
> + }
> +
> + return 0;
> +}
> +
> +static struct platform_driver mmp3_hsic_phy_driver = {
> + .probe = mmp3_hsic_phy_probe,
> + .driver = {
> + .name = "mmp3-hsic-phy",
> + .of_match_table = mmp3_hsic_phy_of_match,
> + },
> +};
> +module_platform_driver(mmp3_hsic_phy_driver);
> +
> +MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
> +MODULE_DESCRIPTION("Marvell MMP3 USB HSIC PHY Driver");
> +MODULE_LICENSE("GPL");
>

\
 
 \ /
  Last update: 2020-03-13 12:19    [W:0.095 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site