[lkml]   [2020]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/4] Add SS/HS-USB changes for Qualcomm SM8150 chipset
This series adds support for the Synopsis 7nm HSPHY USB driver being
used in QCOM chipsets. The HSPHY register map differs compared to
other PHY revisions. In addition, modifications and updates are done
to the QMP driver to add new registers/offsets, and to update the
initialization sequence for enabling the SSUSB path on SM8150.

Jack Pham (1):
phy: qcom-qmp: Add SM8150 QMP USB3 PHY support

Wesley Cheng (3):
dt-bindings: phy: Add binding for qcom,usb-hs-7nm
phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs
phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USB

.../devicetree/bindings/phy/qcom,usb-hs-7nm.yaml | 74 ++++++
drivers/phy/qualcomm/Kconfig | 10 +
drivers/phy/qualcomm/Makefile | 1 +
drivers/phy/qualcomm/phy-qcom-qmp.c | 157 +++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 198 +++++++++++++-
drivers/phy/qualcomm/phy-qcom-snps-7nm.c | 294 +++++++++++++++++++++
6 files changed, 732 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hs-7nm.yaml
create mode 100644 drivers/phy/qualcomm/phy-qcom-snps-7nm.c

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

 \ /
  Last update: 2020-03-14 01:56    [W:0.069 / U:29.764 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site