lkml.org 
[lkml]   [2020]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: R: [PATCH] ARM: qcom: Disable i2c device on gsbi4 for ipq806x
On Fri 13 Mar 15:34 PDT 2020, ansuelsmth@gmail.com wrote:

> > Quoting Ansuel Smith (2020-03-13 12:58:16)
> > > diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
> > b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
> > > index 554c65e7aa0e..580aec63030d 100644
> > > --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
> > > +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
> > > @@ -21,14 +21,5 @@ mux {
> > > };
> > > };
> > > };
> > > -
> > > - gsbi@16300000 {
> > > - i2c@16380000 {
> > > - status = "ok";
> > > - clock-frequency = <200000>;
> > > - pinctrl-0 = <&i2c4_pins>;
> > > - pinctrl-names = "default";
> > > - };
> > > - };
> > > };
> > > };
> > > diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-
> > ipq806x.c
> > > index b0eee0903807..75706807e6cf 100644
> > > --- a/drivers/clk/qcom/gcc-ipq806x.c
> > > +++ b/drivers/clk/qcom/gcc-ipq806x.c
> > > @@ -782,7 +782,7 @@ static struct clk_rcg gsbi4_qup_src = {
> > > .parent_names = gcc_pxo_pll8,
> > > .num_parents = 2,
> > > .ops = &clk_rcg_ops,
> > > - .flags = CLK_SET_PARENT_GATE,
> > > + .flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED,
> >
> > A better solution is to use the protected-clocks property so we don't
> > try to touch these clks at all on this device. So this whole patch can
> > be routed through arm-soc and remove the i2c node and add some dt
> > property to the gcc node.
> >
>
> Should I add a comment where the i2c is removed or I can remove it
> directly?
>

It's fine that you just remove it, like you proposed above.

The commit message should describe the reason and per your description I
don't expect that anyone will miss the node...

Regards,
Bjorn

> > > },
> > > },
> > > };
>

\
 
 \ /
  Last update: 2020-03-14 00:48    [W:0.045 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site