lkml.org 
[lkml]   [2020]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] x86/vector: Allow to free vector for managed IRQ
Date
After we introduced the "managed_irq" sub-parameter for isolcpus, it's
possible to free a kernel managed irq vector now.

It can be triggered easily by booting a VM with a few vcpus, with one
virtio-blk device and then mark some cores as HK_FLAG_MANAGED_IRQ (in
below case, there're 4 vcpus, with vcpu 3 isolated with managed_irq):

[ 2.889911] ------------[ cut here ]------------
[ 2.889964] WARNING: CPU: 3 PID: 0 at arch/x86/kernel/apic/vector.c:853 free_moved_vector+0x126/0x160
[ 2.889964] Modules linked in: crc32c_intel serio_raw virtio_blk(+) qemu_fw_cfg
[ 2.889968] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.6.0-rc1 #18
[ 2.889969] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 2.889970] RIP: 0010:free_moved_vector+0x126/0x160
[ 2.889972] Code: 45 00 48 85 c0 75 df e9 2b ff ff ff 48 8b 05 f9 51 71 01 e8 3c 5a 11 00 85 c0 74 09 80 3d 8d 39 71 01 00 5
[ 2.889972] RSP: 0000:ffffb5ac00110fa0 EFLAGS: 00010002
[ 2.889973] RAX: 0000000000000001 RBX: ffffa00fad2d60c0 RCX: 0000000000000821
[ 2.889974] RDX: 0000000000000000 RSI: 00000000fd2bd4ba RDI: ffffa00fad2d60c0
[ 2.889974] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
[ 2.889975] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000023
[ 2.889975] R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000
[ 2.889976] FS: 0000000000000000(0000) GS:ffffa00fbbd80000(0000) knlGS:0000000000000000
[ 2.889977] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2.889978] CR2: 00000000ffffffff CR3: 0000000123610001 CR4: 0000000000360ee0
[ 2.889980] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2.889980] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 2.889981] Call Trace:
[ 2.889982] <IRQ>
[ 2.889987] smp_irq_move_cleanup_interrupt+0xac/0xc6
[ 2.889989] irq_move_cleanup_interrupt+0xc/0x20
[ 2.889990] </IRQ>
[ 2.889991] RIP: 0010:native_safe_halt+0xe/0x10
[ 2.889992] Code: cc cc cc cc cc cc cc cc cc cc cc cc e9 07 00 00 00 0f 00 2d 56 82 4f 00 f4 c3 66 90 e9 07 00 00 00 0f 00 0
[ 2.889993] RSP: 0000:ffffb5ac00083eb0 EFLAGS: 00000206 ORIG_RAX: ffffffffffffffdf
[ 2.889994] RAX: ffffa00fbb260000 RBX: 0000000000000003 RCX: 0000000000000000
[ 2.889994] RDX: ffffa00fbb260000 RSI: 0000000000000006 RDI: ffffa00fbb260000
[ 2.889995] RBP: 0000000000000003 R08: 000000cd42e4dffb R09: 0000000000000000
[ 2.889995] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa00fbb260000
[ 2.889996] R13: 0000000000000000 R14: 0000000000000000 R15: ffffa00fbb260000
[ 2.890003] default_idle+0x1f/0x140
[ 2.890006] do_idle+0x1fa/0x270
[ 2.890010] cpu_startup_entry+0x19/0x20
[ 2.890012] start_secondary+0x164/0x1b0
[ 2.890014] secondary_startup_64+0xa4/0xb0
[ 2.890021] irq event stamp: 8758
[ 2.890022] hardirqs last enabled at (8755): [<ffffffffbbb105ca>] default_idle+0x1a/0x140
[ 2.890023] hardirqs last disabled at (8756): [<ffffffffbb0039f7>] trace_hardirqs_off_thunk+0x1a/0x1c
[ 2.890025] softirqs last enabled at (8758): [<ffffffffbb0ecce8>] irq_enter+0x68/0x70
[ 2.890026] softirqs last disabled at (8757): [<ffffffffbb0ecccd>] irq_enter+0x4d/0x70
[ 2.890027] ---[ end trace deb5d563d2acb13f ]---

I believe the same thing will happen to bare metals.

When allocating the IRQ for the device, activate_managed() will try to
allocate a vector based on what we've calculated for kernel managed
IRQs (which does not take HK_FLAG_MANAGED_IRQ into account). However
when we bind the IRQ to the IRQ handler, we'll do irq_startup() and
irq_do_set_affinity(), in which we will start to consider the whole
HK_FLAG_MANAGED_IRQ logic. This means the chosen core can be
different from when we do the allocation. When that happens, we'll
need to be able to properly free the old vector on the old core.

Remove the WARN_ON_ONCE() to allow this to happen.

Fixes: 11ea68f553e2 ("genirq, sched/isolation: Isolate from handling managed interrupts")
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Ming Lei <minlei@redhat.com>
CC: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
---
arch/x86/kernel/apic/vector.c | 8 --------
1 file changed, 8 deletions(-)

diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c
index 2c5676b0a6e7..a1142260b123 100644
--- a/arch/x86/kernel/apic/vector.c
+++ b/arch/x86/kernel/apic/vector.c
@@ -837,14 +837,6 @@ static void free_moved_vector(struct apic_chip_data *apicd)
unsigned int cpu = apicd->prev_cpu;
bool managed = apicd->is_managed;

- /*
- * This should never happen. Managed interrupts are not
- * migrated except on CPU down, which does not involve the
- * cleanup vector. But try to keep the accounting correct
- * nevertheless.
- */
- WARN_ON_ONCE(managed);
-
trace_vector_free_moved(apicd->irq, cpu, vector, managed);
irq_matrix_free(vector_matrix, cpu, vector, managed);
per_cpu(vector_irq, cpu)[vector] = VECTOR_UNUSED;
--
2.24.1
\
 
 \ /
  Last update: 2020-03-12 21:59    [W:0.094 / U:1.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site