lkml.org 
[lkml]   [2020]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] thermal: qoriq: Use devm_add_action_or_reset() to handle all cleanups
From
Date
On 12/03/2020 12:47, Anson Huang wrote:
> Hi, Daniel
>
>> Subject: Re: [PATCH 1/2] thermal: qoriq: Use devm_add_action_or_reset() to
>> handle all cleanups
>>
>> On 11/03/2020 06:07, Anson Huang wrote:
>>> Use devm_add_action_or_reset() to handle all cleanups of failure in
>>> .probe and .remove, then .remove callback can be dropped.
>>
>> Is this change compatible with the tristate?
>
> I think so, any concern need me to double confirm?

TBH, I discovered the function with your patch. My concern is if the
callback is called when unloading the module.


>>> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
>>> ---
>>> drivers/thermal/qoriq_thermal.c | 35
>>> ++++++++++++++---------------------
>>> 1 file changed, 14 insertions(+), 21 deletions(-)
>>>
>>> diff --git a/drivers/thermal/qoriq_thermal.c
>>> b/drivers/thermal/qoriq_thermal.c index 874bc46..67a8d84 100644
>>> --- a/drivers/thermal/qoriq_thermal.c
>>> +++ b/drivers/thermal/qoriq_thermal.c
>>> @@ -228,6 +228,14 @@ static const struct regmap_access_table
>> qoriq_rd_table = {
>>> .n_yes_ranges = ARRAY_SIZE(qoriq_yes_ranges),
>>> };
>>>
>>> +static void qoriq_tmu_action(void *p) {
>>> + struct qoriq_tmu_data *data = p;
>>> +
>>> + regmap_write(data->regmap, REGS_TMR, TMR_DISABLE);
>>> + clk_disable_unprepare(data->clk);
>>> +}
>>> +
>>> static int qoriq_tmu_probe(struct platform_device *pdev) {
>>> int ret;
>>> @@ -278,6 +286,10 @@ static int qoriq_tmu_probe(struct platform_device
>> *pdev)
>>> return ret;
>>> }
>>>
>>> + ret = devm_add_action_or_reset(dev, qoriq_tmu_action, data);
>>> + if (ret)
>>> + return ret;
>>> +
>>> /* version register offset at: 0xbf8 on both v1 and v2 */
>>> ret = regmap_read(data->regmap, REGS_IPBRR(0), &ver);
>>> if (ret) {
>>> @@ -290,35 +302,17 @@ static int qoriq_tmu_probe(struct
>>> platform_device *pdev)
>>>
>>> ret = qoriq_tmu_calibration(dev, data); /* TMU calibration */
>>> if (ret < 0)
>>> - goto err;
>>> + return ret;
>>>
>>> ret = qoriq_tmu_register_tmu_zone(dev, data);
>>> if (ret < 0) {
>>> dev_err(dev, "Failed to register sensors\n");
>>> - ret = -ENODEV;
>>> - goto err;
>>> + return ret;
>>> }
>>>
>>> platform_set_drvdata(pdev, data);
>>>
>>> return 0;
>>> -
>>> -err:
>>> - clk_disable_unprepare(data->clk);
>>> -
>>> - return ret;
>>> -}
>>> -
>>> -static int qoriq_tmu_remove(struct platform_device *pdev) -{
>>> - struct qoriq_tmu_data *data = platform_get_drvdata(pdev);
>>> -
>>> - /* Disable monitoring */
>>> - regmap_write(data->regmap, REGS_TMR, TMR_DISABLE);
>>> -
>>> - clk_disable_unprepare(data->clk);
>>> -
>>> - return 0;
>>> }
>>>
>>> static int __maybe_unused qoriq_tmu_suspend(struct device *dev) @@
>>> -365,7 +359,6 @@ static struct platform_driver qoriq_tmu = {
>>> .of_match_table = qoriq_tmu_match,
>>> },
>>> .probe = qoriq_tmu_probe,
>>> - .remove = qoriq_tmu_remove,
>>> };
>>> module_platform_driver(qoriq_tmu);
>>>
>>>
>>
>>
>> --
>>
>> <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.
>> linaro.org%2F&amp;data=02%7C01%7CAnson.Huang%40nxp.com%7C37ea3
>> 145642b47b4df7208d7c677e57d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7
>> C0%7C0%7C637196090558448813&amp;sdata=%2FCfH8GPxd57CDlau1pMcq
>> LH7GjGIh%2Fu%2Bfq7teGsS8KM%3D&amp;reserved=0> Linaro.org │ Open
>> source software for ARM SoCs
>>
>> Follow Linaro:
>> <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.
>> facebook.com%2Fpages%2FLinaro&amp;data=02%7C01%7CAnson.Huang%4
>> 0nxp.com%7C37ea3145642b47b4df7208d7c677e57d%7C686ea1d3bc2b4c6fa
>> 92cd99c5c301635%7C0%7C0%7C637196090558448813&amp;sdata=KBUWpT
>> 4quqo08r8YhbMVk%2Fyf2jIT1CKgc5i3jI9gCwo%3D&amp;reserved=0>
>> Facebook |
>> <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Ftwitte
>> r.com%2F%23!%2Flinaroorg&amp;data=02%7C01%7CAnson.Huang%40nxp.c
>> om%7C37ea3145642b47b4df7208d7c677e57d%7C686ea1d3bc2b4c6fa92cd9
>> 9c5c301635%7C0%7C0%7C637196090558448813&amp;sdata=%2FEgeRMWd
>> qbbaOMl2Tfb%2BtLmfttqN1WcFbl9%2B5tXtOic%3D&amp;reserved=0>
>> Twitter |
>> <https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.
>> linaro.org%2Flinaro-
>> blog%2F&amp;data=02%7C01%7CAnson.Huang%40nxp.com%7C37ea314564
>> 2b47b4df7208d7c677e57d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7
>> C0%7C637196090558448813&amp;sdata=SXZow%2F0B%2BIgpfOfAUIG1NsR
>> mcHp868ve%2Ffkejg3ZDvE%3D&amp;reserved=0> Blog
>


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2020-03-12 12:57    [W:0.102 / U:8.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site