lkml.org 
[lkml]   [2020]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v7 0/3] arm64: dts: meson: add dts/bindings for SmartLabs SML-5442TW
Date
This series adds new bindings and a device-tree file for the Smartlabs
SML-5442TW set-top box. The original attempt [1] was 15-months ago but
nothing has really changed apart from a change to yaml bindings.

The QCA9377 BT device does not have bindings and early experiments to add
them are partially successful but need further work. I have dropped the
gpio-hog from the device-tree and will submit changes to add BT once the
supporting bits exist elsewhere in the kernel.

v7 - update gpio-led nodes
- remove gpio-hog for BT enable
- add bindings acks from Rob

v6 - removed audio nodes again

v5 - typo in card name

v4 - typos/corrections from Andreas
- convert to yaml bindings
- add sound node back
- confirmed gpio-hog is necessary

v3 - change to Smartlabs LLC
- removed sound node

v2 - removed audio nodes
- changes soundcard name to "meson-gx-audio"
- added missing uart-has-rtscts;

[1] https://patchwork.kernel.org/cover/10674939/

Christian Hewitt (3):
dt-bindings: add vendor prefix for SmartLabs LLC
dt-bindings: arm: amlogic: add support for the SmartLabs SML-5442TW
arm64: dts: meson: add support for the SmartLabs SML-5442TW

Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts | 284 +++++++++++++++++++++
4 files changed, 288 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905d-sml5442tw.dts

--
2.7.4

\
 
 \ /
  Last update: 2020-03-12 05:41    [W:0.073 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site