lkml.org 
[lkml]   [2020]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 3/3] mmc: tegra: Enable host capability MMC_CAP2_LONG_WAIT_HW_BUSY
Date
Some mmc operations take longer than maximum HW busy detection and
mmc core driver converts R1B type to R1 type response for these
operations based on host max busy timeout and command operation time
and uses SW poll for busy.

Tegra host support long HW busy detection where host waits forever
till the card is busy.

This patch enables MMC_CAP2_LONG_WAIT_HW_BUSY capability for Tegra
host.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
---
drivers/mmc/host/sdhci-tegra.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 40a221d..9d0f371 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -1583,6 +1583,7 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
if (tegra_host->soc_data->nvquirks & NVQUIRK_ENABLE_DDR50)
host->mmc->caps |= MMC_CAP_1_8V_DDR;

+ host->mmc->caps2 |= MMC_CAP2_LONG_WAIT_HW_BUSY;
tegra_sdhci_parse_dt(host);

tegra_host->power_gpio = devm_gpiod_get_optional(&pdev->dev, "power",
--
2.7.4
\
 
 \ /
  Last update: 2020-03-13 02:12    [W:0.059 / U:40.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site