lkml.org 
[lkml]   [2020]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 1/2] rtc: sun6i: Make external 32k oscillator optional
On 08/03/2020 14:58:48+0100, Jernej Skrabec wrote:
> Some boards, like OrangePi PC2 (H5), OrangePi Plus 2E (H3) and Tanix TX6
> (H6) don't have external 32kHz oscillator. Till H6, it didn't really
> matter if external oscillator was enabled because HW detected error and
> fall back to internal one. H6 has same functionality but it's the first
> SoC which have "auto switch bypass" bit documented and always enabled in
> driver. This prevents RTC to work correctly if external crystal is not
> present on board. There are other side effects - all peripherals which
> depends on this clock also don't work (HDMI CEC for example).
>
> Make clocks property optional. If it is present, select external
> oscillator. If not, stay on internal.
>
> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
> ---
> drivers/rtc/rtc-sun6i.c | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
Applied, thanks.

--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2020-03-13 00:21    [W:0.436 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site