[lkml]   [2020]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH 0/6] soc: Add Baikal-T1 SoC APB/AXI EHB and L2-cache drivers
On Fri, Mar 06, 2020 at 04:19:47PM +0100, Arnd Bergmann wrote:
> On Fri, Mar 6, 2020 at 2:07 PM <> wrote:
> >
> > From: Serge Semin <>
> >
> > Aside from PCIe/SATA/DDR/I2C/CPU-reboot specific settings the Baikal-T1
> > system controller provides three vendor-specific blocks. In particular
> > there are two Errors Handler Blocks to detect and report an info regarding
> > any problems discovered on the AXI and APB buses. These are the main buses
> > utilized by the SoC devices to interact with each other. In addition there
> > is a way to tune the MIPS P5600 CM2 L2-cache up by setting the Tag/Data/WS
> > L2-to-RAM latencies. All of this functionality is implemented in the
> > APB/AXI EHB and L2-cache control block drivers to be a part of the kernel soc
> > subsystem (as being specific to the Baikal-T1 SoC) and introduced in the
> > framework of this patchset.
> >
> > This patchset is rebased and tested on the mainline Linux kernel 5.6-rc4:
> > commit 98d54f81e36b ("Linux 5.6-rc4").
> I have no objection to the drivers, but I wonder if these should be
> in drivers/bus and drivers/memory instead of drivers/soc, which have
> similar drivers already. The driver for the L2 cache is not really a
> memory controller driver, but it may be close enough, and we
> already have a couple of different things in there.

I don't have the driver side in my inbox, but isn't setting up cache
latencies in a driver a little late?


 \ /
  Last update: 2020-03-12 22:26    [W:0.240 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site