lkml.org 
[lkml]   [2020]   [Mar]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] dt-bindings: input: atmel_mxt_ts: convert atmel,maxtouch.txt to yaml
On Wed, Mar 11, 2020 at 10:23 AM Dafna Hirschfeld
<dafna.hirschfeld@collabora.com> wrote:
>
> Hi,
> Thanks for the review
>
> On 10.03.20 22:14, Rob Herring wrote:
> > On Tue, Mar 03, 2020 at 07:25:33PM +0200, Dafna Hirschfeld wrote:
> >> Convert the binding file atmel,maxtouch.txt to yaml format.
> >> Also change the file name in the MAINTAINERS file.
> >>
> >> This was tested and verified on ARM and ARM64 with:
> >>
> >> make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
> >> make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
> >>
> >> Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
> >> ---
> >> .../bindings/input/atmel,maxtouch.txt | 41 ------------
> >> .../bindings/input/atmel,maxtouch.yaml | 64 +++++++++++++++++++
> >> MAINTAINERS | 2 +-
> >> 3 files changed, 65 insertions(+), 42 deletions(-)
> >> delete mode 100644 Documentation/devicetree/bindings/input/atmel,maxtouch.txt
> >> create mode 100644 Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
> >>
> >> diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
> >> deleted file mode 100644
> >> index c88919480d37..000000000000
> >> --- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
> >> +++ /dev/null
> >> @@ -1,41 +0,0 @@
> >> -Atmel maXTouch touchscreen/touchpad
> >> -
> >> -Required properties:
> >> -- compatible:
> >> - atmel,maxtouch
> >> -
> >> - The following compatibles have been used in various products but are
> >> - deprecated:
> >> - atmel,qt602240_ts
> >> - atmel,atmel_mxt_ts
> >> - atmel,atmel_mxt_tp
> >> - atmel,mXT224
> >> -
> >> -- reg: The I2C address of the device
> >> -
> >> -- interrupts: The sink for the touchpad's IRQ output
> >> - See ../interrupt-controller/interrupts.txt
> >> -
> >> -Optional properties for main touchpad device:
> >> -
> >> -- linux,gpio-keymap: When enabled, the SPT_GPIOPWN_T19 object sends messages
> >> - on GPIO bit changes. An array of up to 8 entries can be provided
> >> - indicating the Linux keycode mapped to each bit of the status byte,
> >> - starting at the LSB. Linux keycodes are defined in
> >> - <dt-bindings/input/input.h>.
> >> -
> >> - Note: the numbering of the GPIOs and the bit they start at varies between
> >> - maXTouch devices. You must either refer to the documentation, or
> >> - experiment to determine which bit corresponds to which input. Use
> >> - KEY_RESERVED for unused padding values.
> >> -
> >> -- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
> >> -
> >> -Example:
> >> -
> >> - touch@4b {
> >> - compatible = "atmel,maxtouch";
> >> - reg = <0x4b>;
> >> - interrupt-parent = <&gpio>;
> >> - interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
> >> - };
> >> diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
> >> new file mode 100644
> >> index 000000000000..024dc4ded4f3
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
> >> @@ -0,0 +1,64 @@
> >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >> +%YAML 1.2
> >> +---
> >> +$id: http://devicetree.org/schemas/input/atmel,maxtouch.yaml#
> >> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >> +
> >> +title: Atmel maXTouch touchscreen/touchpad
> >> +
> >> +maintainers:
> >> + - Nick Dyer <nick@shmanahar.org>
> >> +
> >> +description: |
> >> + Atmel maXTouch touchscreen/touchpad
> >> +
> >> +properties:
> >> + compatible:
> >> + const: atmel,maxtouch
> >> +
> >> + reg:
> >> + description: The I2C address of the device
> >> + maxItems: 1
> >> +
> >> + interrupts:
> >> + description: The sink for the touchpad's IRQ output
> >
> > How many? Needs 'maxItems: 1'>
> > You can drop the description.
> >
> >> +
> >> + linux,gpio-keymap:
> >> + description:
> >> + When enabled, the SPT_GPIOPWN_T19 object sends messages
> >> + on GPIO bit changes. An array of up to 8 entries can be provided
> >> + indicating the Linux keycode mapped to each bit of the status byte,
> >> + starting at the LSB. Linux keycodes are defined in
> >> + <dt-bindings/input/input.h>.
> >> + Note, the numbering of the GPIOs and the bit they start at varies between
> >> + maXTouch devices. You must either refer to the documentation, or
> >> + experiment to determine which bit corresponds to which input. Use
> >> + KEY_RESERVED for unused padding values.
> >> + $ref: /schemas/types.yaml#/definitions/uint32-array
> >> + maxItems: 8
> >> +
> >> + reset-gpios:
> >> + description: GPIO specifier for the touchscreen's reset pin (active low)
> >> + maxItems: 1
> >> +
> >> +required:
> >> + - compatible
> >> + - reg
> >> + - interrupts
> >> +
> >> +additionalProperties: true
> >
> > That's the default and we generally want this to be 'false'.
> but many nodes has more properties not described here so I could not
> set it to false.

Like touchscreen-* properties? Then you should reference
touchscreen.yaml. And add 'unevaluatedProperties: false' here. That
doesn't yet do anything, but will when the tools support the lastest
json-schema release.

Rob

\
 
 \ /
  Last update: 2020-03-11 16:49    [W:0.274 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site