lkml.org 
[lkml]   [2020]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4] mtd: nand: spi: rework detect procedure for different read id op
Date
On Sat, 2020-02-08 at 07:43:50 UTC, Chuanhong Guo wrote:
> Currently there are 3 different variants of read_id implementation:
> 1. opcode only. Found in GD5FxGQ4xF.
> 2. opcode + 1 addr byte. Found in GD5GxGQ4xA/E
> 3. opcode + 1 dummy byte. Found in other currently supported chips.
>
> Original implementation was for variant 1 and let detect function
> of chips with variant 2 and 3 to ignore the first byte. This isn't
> robust:
>
> 1. For chips of variant 2, if SPI master doesn't keep MOSI low
> during read, chip will get a random id offset, and the entire id
> buffer will shift by that offset, causing detect failure.
>
> 2. For chips of variant 1, if it happens to get a devid that equals
> to manufacture id of variant 2 or 3 chips, it'll get incorrectly
> detected.
>
> This patch reworks detect procedure to address problems above. New
> logic do detection for all variants separatedly, in 1-2-3 order.
> Since all current detect methods do exactly the same id matching
> procedure, unify them into core.c and remove detect method from
> manufacture_ops.
>
> Tested on GD5F1GQ4UAYIG and W25N01GVZEIG.
>
> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel

\
 
 \ /
  Last update: 2020-03-10 19:33    [W:0.064 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site