lkml.org 
[lkml]   [2020]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4.14 057/126] KVM: SVM: Override default MMIO mask if memory encryption is enabled
Has this been tested on the stable kernels?  There's a recent bug report[*]
that suggests the 4.19 backport of this patch may be causing issues.

[*] https://bugzilla.kernel.org/show_bug.cgi?id=206795


On Tue, Mar 10, 2020 at 01:41:18PM +0100, Greg Kroah-Hartman wrote:
> From: Tom Lendacky <thomas.lendacky@amd.com>
>
> commit 52918ed5fcf05d97d257f4131e19479da18f5d16 upstream.
>
> The KVM MMIO support uses bit 51 as the reserved bit to cause nested page
> faults when a guest performs MMIO. The AMD memory encryption support uses
> a CPUID function to define the encryption bit position. Given this, it is
> possible that these bits can conflict.
>
> Use svm_hardware_setup() to override the MMIO mask if memory encryption
> support is enabled. Various checks are performed to ensure that the mask
> is properly defined and rsvd_bits() is used to generate the new mask (as
> was done prior to the change that necessitated this patch).
>
> Fixes: 28a1f3ac1d0c ("kvm: x86: Set highest physical address bits in non-present/reserved SPTEs")
> Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> ---
> arch/x86/kvm/svm.c | 43 +++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 43 insertions(+)
>
> --- a/arch/x86/kvm/svm.c
> +++ b/arch/x86/kvm/svm.c
> @@ -1088,6 +1088,47 @@ static int avic_ga_log_notifier(u32 ga_t
> return 0;
> }
>
> +/*
> + * The default MMIO mask is a single bit (excluding the present bit),
> + * which could conflict with the memory encryption bit. Check for
> + * memory encryption support and override the default MMIO mask if
> + * memory encryption is enabled.
> + */
> +static __init void svm_adjust_mmio_mask(void)
> +{
> + unsigned int enc_bit, mask_bit;
> + u64 msr, mask;
> +
> + /* If there is no memory encryption support, use existing mask */
> + if (cpuid_eax(0x80000000) < 0x8000001f)
> + return;
> +
> + /* If memory encryption is not enabled, use existing mask */
> + rdmsrl(MSR_K8_SYSCFG, msr);
> + if (!(msr & MSR_K8_SYSCFG_MEM_ENCRYPT))
> + return;
> +
> + enc_bit = cpuid_ebx(0x8000001f) & 0x3f;
> + mask_bit = boot_cpu_data.x86_phys_bits;
> +
> + /* Increment the mask bit if it is the same as the encryption bit */
> + if (enc_bit == mask_bit)
> + mask_bit++;
> +
> + /*
> + * If the mask bit location is below 52, then some bits above the
> + * physical addressing limit will always be reserved, so use the
> + * rsvd_bits() function to generate the mask. This mask, along with
> + * the present bit, will be used to generate a page fault with
> + * PFER.RSV = 1.
> + *
> + * If the mask bit location is 52 (or above), then clear the mask.
> + */
> + mask = (mask_bit < 52) ? rsvd_bits(mask_bit, 51) | PT_PRESENT_MASK : 0;
> +
> + kvm_mmu_set_mmio_spte_mask(mask, PT_WRITABLE_MASK | PT_USER_MASK);
> +}
> +
> static __init int svm_hardware_setup(void)
> {
> int cpu;
> @@ -1123,6 +1164,8 @@ static __init int svm_hardware_setup(voi
> kvm_enable_efer_bits(EFER_SVME | EFER_LMSLE);
> }
>
> + svm_adjust_mmio_mask();
> +
> for_each_possible_cpu(cpu) {
> r = svm_cpu_init(cpu);
> if (r)
>
>

\
 
 \ /
  Last update: 2020-03-10 19:21    [W:0.545 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site