[lkml]   [2020]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH 1/6] doc: spi-fsl-dspi: Add specific compatibles for all Layerscape SoCs
From: Vladimir Oltean <>

Make the second compatible string optional for LS1012A, LS1088A and
LS2080A. Old versions of the spi-fsl-dspi.c driver still need to probe
on the old, generic compatible string for these controllers (such as
"fsl,ls1021a-v1.0-dspi") which provides less functionality.

Document the device tree bindings for LS1043A and LS1046A, whose
bindings are already in use in fsl-ls1043a.dtsi and fsl-ls1046a.dtsi.

Introduce new compatible strings for LS1028A and LX2160A. There will be
no second compatible string for these.

Signed-off-by: Vladimir Oltean <>
.../devicetree/bindings/spi/spi-fsl-dspi.txt | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
index 162e024b95a0..99b94cfe1623 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
@@ -1,12 +1,17 @@
ARM Freescale DSPI controller

Required properties:
-- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi",
- "fsl,ls2085a-dspi"
- or
- "fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi"
- "fsl,ls1012a-dspi" followed by "fsl,ls1021a-v1.0-dspi"
- "fsl,ls1088a-dspi" followed by "fsl,ls1021a-v1.0-dspi"
+- compatible : must be one of:
+ "fsl,vf610-dspi",
+ "fsl,ls1021a-v1.0-dspi",
+ "fsl,ls1012a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
+ "fsl,ls1028a-dspi",
+ "fsl,ls1043a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
+ "fsl,ls1046a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
+ "fsl,ls1088a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"),
+ "fsl,ls2080a-dspi" (optionally followed by "fsl,ls2085a-dspi"),
+ "fsl,ls2085a-dspi",
+ "fsl,lx2160a-dspi",
- reg : Offset and length of the register set for the device
- interrupts : Should contain SPI controller interrupt
- clocks: from common clock binding: handle to dspi clock.
 \ /
  Last update: 2020-03-02 01:21    [W:0.077 / U:0.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site