lkml.org 
[lkml]   [2020]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/6] floppy: introduce new functions fdc_inb() and fdc_outb()
Date
These two functions replace fd_inb() and fd_outb() in that they take
the FDC in argument. This will ease the separation of the base address
and the port everywhere the code is used.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
drivers/block/floppy.c | 42 ++++++++++++++++++++++++++----------------
1 file changed, 26 insertions(+), 16 deletions(-)

diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index d521899..250a451 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -594,6 +594,16 @@ static unsigned char fsector_t; /* sector in track */
static unsigned char in_sector_offset; /* offset within physical sector,
* expressed in units of 512 bytes */

+static inline unsigned char fdc_inb(int fdc, unsigned long addr)
+{
+ return fd_inb(addr);
+}
+
+static inline void fdc_outb(unsigned char value, int fdc, unsigned long addr)
+{
+ fd_outb(value, addr);
+}
+
static inline bool drive_no_geom(int drive)
{
return !current_type[drive] && !ITYPE(drive_state[drive].fd_device);
@@ -743,14 +753,14 @@ static int disk_change(int drive)
"checking disk change line for drive %d\n", drive);
debug_dcl(drive_params[drive].flags, "jiffies=%lu\n", jiffies);
debug_dcl(drive_params[drive].flags, "disk change line=%x\n",
- fd_inb(FD_DIR) & 0x80);
+ fdc_inb(fdc, FD_DIR) & 0x80);
debug_dcl(drive_params[drive].flags, "flags=%lx\n",
drive_state[drive].flags);

if (drive_params[drive].flags & FD_BROKEN_DCL)
return test_bit(FD_DISK_CHANGED_BIT,
&drive_state[drive].flags);
- if ((fd_inb(FD_DIR) ^ drive_params[drive].flags) & 0x80) {
+ if ((fdc_inb(fdc, FD_DIR) ^ drive_params[drive].flags) & 0x80) {
set_bit(FD_VERIFY_BIT, &drive_state[drive].flags);
/* verify write protection */

@@ -807,7 +817,7 @@ static int set_dor(int fdc, char mask, char data)
disk_change(drive);
}
fdc_state[fdc].dor = newdor;
- fd_outb(newdor, FD_DOR);
+ fdc_outb(newdor, fdc, FD_DOR);

unit = newdor & 0x3;
if (!is_selected(olddor, unit) && is_selected(newdor, unit)) {
@@ -822,8 +832,8 @@ static void twaddle(void)
{
if (drive_params[current_drive].select_delay)
return;
- fd_outb(fdc_state[fdc].dor & ~(0x10 << UNIT(current_drive)), FD_DOR);
- fd_outb(fdc_state[fdc].dor, FD_DOR);
+ fdc_outb(fdc_state[fdc].dor & ~(0x10 << UNIT(current_drive)), fdc, FD_DOR);
+ fdc_outb(fdc_state[fdc].dor, fdc, FD_DOR);
drive_state[current_drive].select_date = jiffies;
}

@@ -864,7 +874,7 @@ static void set_fdc(int drive)
#endif
if (fdc_state[fdc].rawcmd == 2)
reset_fdc_info(1);
- if (fd_inb(FD_STATUS) != STATUS_READY)
+ if (fdc_inb(fdc, FD_STATUS) != STATUS_READY)
fdc_state[fdc].reset = 1;
}

@@ -1103,7 +1113,7 @@ static int wait_til_ready(void)
if (fdc_state[fdc].reset)
return -1;
for (counter = 0; counter < 10000; counter++) {
- status = fd_inb(FD_STATUS);
+ status = fdc_inb(fdc, FD_STATUS);
if (status & STATUS_READY)
return status;
}
@@ -1124,7 +1134,7 @@ static int output_byte(char byte)
return -1;

if (is_ready_state(status)) {
- fd_outb(byte, FD_DATA);
+ fdc_outb(byte, fdc, FD_DATA);
output_log[output_log_pos].data = byte;
output_log[output_log_pos].status = status;
output_log[output_log_pos].jiffies = jiffies;
@@ -1157,7 +1167,7 @@ static int result(void)
return i;
}
if (status == (STATUS_DIR | STATUS_READY | STATUS_BUSY))
- reply_buffer[i] = fd_inb(FD_DATA);
+ reply_buffer[i] = fdc_inb(fdc, FD_DATA);
else
break;
}
@@ -1352,7 +1362,7 @@ static int fdc_dtr(void)
return 0;

/* Set dtr */
- fd_outb(raw_cmd->rate & 3, FD_DCR);
+ fdc_outb(raw_cmd->rate & 3, fdc, FD_DCR);

/* TODO: some FDC/drive combinations (C&T 82C711 with TEAC 1.2MB)
* need a stabilization period of several milliseconds to be
@@ -1796,11 +1806,11 @@ static void reset_fdc(void)
release_dma_lock(flags);

if (fdc_state[fdc].version >= FDC_82072A)
- fd_outb(0x80 | (fdc_state[fdc].dtr & 3), FD_STATUS);
+ fdc_outb(0x80 | (fdc_state[fdc].dtr & 3), fdc, FD_STATUS);
else {
- fd_outb(fdc_state[fdc].dor & ~0x04, FD_DOR);
+ fdc_outb(fdc_state[fdc].dor & ~0x04, fdc, FD_DOR);
udelay(FD_RESET_DELAY);
- fd_outb(fdc_state[fdc].dor, FD_DOR);
+ fdc_outb(fdc_state[fdc].dor, fdc, FD_DOR);
}
}

@@ -1827,7 +1837,7 @@ static void show_floppy(void)
print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 1,
reply_buffer, resultsize, true);

- pr_info("status=%x\n", fd_inb(FD_STATUS));
+ pr_info("status=%x\n", fdc_inb(fdc, FD_STATUS));
pr_info("fdc_busy=%lu\n", fdc_busy);
if (do_floppy)
pr_info("do_floppy=%ps\n", do_floppy);
@@ -4875,7 +4885,7 @@ static int floppy_grab_irq_and_dma(void)
for (fdc = 0; fdc < N_FDC; fdc++) {
if (fdc_state[fdc].address != -1) {
reset_fdc_info(1);
- fd_outb(fdc_state[fdc].dor, FD_DOR);
+ fdc_outb(fdc_state[fdc].dor, fdc, FD_DOR);
}
}
fdc = 0;
@@ -4883,7 +4893,7 @@ static int floppy_grab_irq_and_dma(void)

for (fdc = 0; fdc < N_FDC; fdc++)
if (fdc_state[fdc].address != -1)
- fd_outb(fdc_state[fdc].dor, FD_DOR);
+ fdc_outb(fdc_state[fdc].dor, fdc, FD_DOR);
/*
* The driver will try and free resources and relies on us
* to know if they were allocated or not.
--
2.9.0
\
 
 \ /
  Last update: 2020-03-01 20:57    [W:0.082 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site