lkml.org 
[lkml]   [2020]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] ARM: ep93xx: Replace setup_irq() by request_irq()
Date
request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.

Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.

Hence replace setup_irq() by request_irq().

[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos

Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
---
Hi sub-arch maintainers,

If the patch is okay, please take it thr' your tree.

Regards
afzal

v3:
* Split out from series, also create subarch level patch as Thomas
suggested to take it thr' respective maintainers
* Modify string displayed in case of error as suggested by Thomas
* Re-arrange code as required to improve readability
* Remove irrelevant parts from commit message & improve

v2:
* Replace pr_err("request_irq() on %s failed" by
pr_err("%s: request_irq() failed"
* Commit message massage

arch/arm/mach-ep93xx/timer-ep93xx.c | 14 ++++++--------
1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-ep93xx/timer-ep93xx.c b/arch/arm/mach-ep93xx/timer-ep93xx.c
index de998830f534..dd4b164d1831 100644
--- a/arch/arm/mach-ep93xx/timer-ep93xx.c
+++ b/arch/arm/mach-ep93xx/timer-ep93xx.c
@@ -117,15 +117,11 @@ static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}

-static struct irqaction ep93xx_timer_irq = {
- .name = "ep93xx timer",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = ep93xx_timer_interrupt,
- .dev_id = &ep93xx_clockevent,
-};
-
void __init ep93xx_timer_init(void)
{
+ int irq = IRQ_EP93XX_TIMER3;
+ unsigned long flags = IRQF_TIMER | IRQF_IRQPOLL;
+
/* Enable and register clocksource and sched_clock on timer 4 */
writel(EP93XX_TIMER4_VALUE_HIGH_ENABLE,
EP93XX_TIMER4_VALUE_HIGH);
@@ -136,7 +132,9 @@ void __init ep93xx_timer_init(void)
EP93XX_TIMER4_RATE);

/* Set up clockevent on timer 3 */
- setup_irq(IRQ_EP93XX_TIMER3, &ep93xx_timer_irq);
+ if (request_irq(irq, ep93xx_timer_interrupt, flags, "ep93xx timer",
+ &ep93xx_clockevent))
+ pr_err("Failed to request irq %d (ep93xx timer)\n", irq);
clockevents_config_and_register(&ep93xx_clockevent,
EP93XX_TIMER123_RATE,
1,
--
2.25.1
\
 
 \ /
  Last update: 2020-03-01 13:21    [W:0.065 / U:1.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site