lkml.org 
[lkml]   [2020]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 4/5 V2] Documentation: ABI: testing: ad7192: update sysfs docs
On Wed, 5 Feb 2020 19:15:10 +0200
Alexandru Tachici <alexandru.tachici@analog.com> wrote:

> Updated mainline documentation on ad7192 userspace sysfs.
>
> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
looks good, but the shorted channel docs need to be added as well
unless I'm missing something.

Thanks,

Jonathan

> ---
> .../ABI/testing/sysfs-bus-iio-adc-ad7192 | 17 ++++++++++------
> .../iio/Documentation/sysfs-bus-iio-ad7192 | 20 -------------------
> 2 files changed, 11 insertions(+), 26 deletions(-)
> delete mode 100644 drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192 b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192
> index 7627d3be08f5..9be6b8a69a19 100644
> --- a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192
> +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192
> @@ -2,17 +2,22 @@ What: /sys/bus/iio/devices/iio:deviceX/ac_excitation_en
> KernelVersion:
> Contact: linux-iio@vger.kernel.org
> Description:
> - Reading gives the state of AC excitation.
> - Writing '1' enables AC excitation.
> + This attribute, if available, is used to enable the AC
> + excitation mode found on some converters. In ac excitation mode,
> + the polarity of the excitation voltage is reversed on
> + alternate cycles, to eliminate DC errors.
>
> What: /sys/bus/iio/devices/iio:deviceX/bridge_switch_en
> KernelVersion:
> Contact: linux-iio@vger.kernel.org
> Description:
> - This bridge switch is used to disconnect it when there is a
> - need to minimize the system current consumption.
> - Reading gives the state of the bridge switch.
> - Writing '1' enables the bridge switch.
> + This attribute, if available, is used to close or open the
> + bridge power down switch found on some converters.
> + In bridge applications, such as strain gauges and load cells,
> + the bridge itself consumes the majority of the current in the
> + system. To minimize the current consumption of the system,
> + the bridge can be disconnected (when it is not being used
> + using the bridge_switch_en attribute.
>
> What: /sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration
> KernelVersion:
> diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192 b/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192
> deleted file mode 100644
> index 1c35c507cc05..000000000000
> --- a/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192
> +++ /dev/null
> @@ -1,20 +0,0 @@
> -What: /sys/.../iio:deviceX/ac_excitation_en
> -KernelVersion: 3.1.0
> -Contact: linux-iio@vger.kernel.org
> -Description:
> - This attribute, if available, is used to enable the AC
> - excitation mode found on some converters. In ac excitation mode,
> - the polarity of the excitation voltage is reversed on
> - alternate cycles, to eliminate DC errors.
> -
> -What: /sys/.../iio:deviceX/bridge_switch_en
> -KernelVersion: 3.1.0
> -Contact: linux-iio@vger.kernel.org
> -Description:
> - This attribute, if available, is used to close or open the
> - bridge power down switch found on some converters.
> - In bridge applications, such as strain gauges and load cells,
> - the bridge itself consumes the majority of the current in the
> - system. To minimize the current consumption of the system,
> - the bridge can be disconnected (when it is not being used
> - using the bridge_switch_en attribute.

\
 
 \ /
  Last update: 2020-02-06 11:06    [W:0.045 / U:6.356 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site