[lkml]   [2020]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v4 00/13] PHY: Update Cadence Torrent PHY driver with reconfiguration
This patch series applies to the Cadence SD0801 PHY driver.
Cadence SD0801 PHY is also known as Torrent PHY. Torrent PHY
is a multiprotocol PHY supporting PHY configurations including
Display Port, USB and PCIe.

This patch series converts SD0801 PHY driver for DisplayPort into a
generic Torrent PHY driver, updates DisplayPort functionality with
reconfiguration support and finally adds platform dependent initialization
for TI J7 SoCs.

The patch series has following patches which applies the changes
in the below sequence
1. 001-dt-bindings-phy-Remove-Cadence-MHDP-PHY-dt-binding
This patch removes the MHDP PHY binding.
2. 002-dt-bindings-phy-Add-Cadence-MHDP-PHY-bindings-in-YAML-format.
This patch converts the MHDP PHY device tree bindings to yaml schemas
3. 003-phy-cadence-dp-Rename-to-phy-Cadence-Torrent
Rename Cadence DP PHY driver from phy-cadence-dp to phy-cadence-torrent
4. 004-phy-cadence-torrent-Adopt-Torrent-nomenclature
Update private data structures, module descriptions and functions prefix to Torrent
5. 005-phy-cadence-torrent-Add-wrapper-for-PHY-register-access
Add a wrapper function to write Torrent PHY registers to improve code readability.
6. 006-phy-cadence-torrent-Add-wrapper-for-DPTX-register-access
Add wrapper functions to read, write DisplayPort specific PHY registers to improve code
7. 007-phy-cadence-torrent-Refactor-code-for-reusability
Add separate function to set different power state values.
Use of uniform polling timeout value. Check return values of functions for error handling.
8. 008-phy-cadence-torrent-Add-19.2-MHz-reference-clock-support
Add configuration functions for 19.2 MHz reference clock support. Add register configurations
for SSC support.
9. 009-phy-cadence-torrent-Implement-phy-configure-APIs
Add PHY configuration APIs for link rate, number of lanes, voltage swing and pre-emphasis values.
10. 010-phy-cadence-torrent-Use-regmap-to-read-and-write-Torrent-PHY-registers
Use regmap for accessing Torrent PHY registers. Update register offsets. Abstract address
calculation using regmap APIs.
11. 011-phy: cadence-torrent-Use-regmap-to-read-and-write-DPTX-PHY-registers
Use regmap to read and write DPTX specific PHY registers.
12. 012-phy-cadence-torrent-Add-platform-dependent-initialization-structure
Add platform dependent initialization data for Torrent PHY used in TI's J721E SoC.
13. 013-phy: cadence-torrent-Add-support-for-subnode-bindings
Implement single link subnode support to the phy driver.

Version History:

- Add separate patch to remove old binding.
- Add new patch to add new binding in YAML format.
- Squashed "dt-bindings: phy: phy-cadence-torrent: Add platform dependent
compatible string" with "dt-bindings: phy: Add Cadence MHDP PHY bindings
in YAML format".
- Added SPDX dual license tag to YAML bindings.
- Updated resets property description and removed reset-names
- Added enum to cdns,phy-type property adding all the currently
known phy-type values.
- Updated the child node resets property to support one reset
per lane.
- Added default values for cdns,num-lanes and cdns,max-bit-rate properties.

- Removed "Add clock binding" patch from the series and merged it with
"Convert-Cadence-MHDP-PHY-bindings-to-YAML" patch.
- Added reset and reset-names properties to YAML file.
- Updated dptx_phy reg entry as optional in YAML.
- Renamed reg-names from sd0801_phy to torrent_phy.
- Added subnode property for each group of PHY lanes based on PHY
type to the YAML. Renamed num_lanes and max_bit_rate to cdns,num-lanes
and cdns,max-bit-rate and moved it to subnode properties.
- Added cdns,phy-type property in subnode. Currently cdns,phy-type supports only
- Added subnode instance structure to the driver in reference to the dts change.
- Updated functions to read properties from child node instead of parent node.
- Added num_lanes as argument to the cdns_torrent_dp_run function.

- Remove patch [1] from this series and send for a separate review.
- Use enum in compatible property of YAML file.
- Remove quotes in clock-names property "refclk" -> refclk in YAML file.
- Add reg-names property to YAML file
- Add additionalProperties:false to YAML file.
- No change in the driver code.

This patch series is dependent on PHY DisplayPort configuration patch [1].


Swapnil Jakhade (10):
phy: cadence-torrent: Adopt Torrent nomenclature
phy: cadence-torrent: Add wrapper for PHY register access
phy: cadence-torrent: Add wrapper for DPTX register access
phy: cadence-torrent: Refactor code for reusability
phy: cadence-torrent: Add 19.2 MHz reference clock support
phy: cadence-torrent: Implement PHY configure APIs
phy: cadence-torrent: Use regmap to read and write Torrent PHY
phy: cadence-torrent: Use regmap to read and write DPTX PHY registers
phy: cadence-torrent: Add platform dependent initialization structure
phy: cadence-torrent: Add support for subnode bindings

Yuti Amonkar (3):
dt-bindings: phy: Remove Cadence MHDP PHY dt binding
dt-bindings: phy: Add Cadence MHDP PHY bindings in YAML format.
phy: cadence-dp: Rename to phy-cadence-torrent

.../bindings/phy/phy-cadence-dp.txt | 30 -
.../bindings/phy/phy-cadence-torrent.yaml | 143 ++
drivers/phy/cadence/Kconfig | 6 +-
drivers/phy/cadence/Makefile | 2 +-
drivers/phy/cadence/phy-cadence-dp.c | 541 -----
drivers/phy/cadence/phy-cadence-torrent.c | 1944 +++++++++++++++++
6 files changed, 2091 insertions(+), 575 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
create mode 100644 Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
delete mode 100644 drivers/phy/cadence/phy-cadence-dp.c
create mode 100644 drivers/phy/cadence/phy-cadence-torrent.c


 \ /
  Last update: 2020-02-06 07:12    [W:0.121 / U:8.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site