lkml.org 
[lkml]   [2020]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 12/12] arm64: dts: librem5-devkit: add lsm9ds1 mount matrix
Date
The IMU chip on the librem5-devkit is not mounted at the "natural" place
that would match normal phone orientation (see the documentation for the
details about what that is).

Since the lsm9ds1 driver supports providing a mount matrix, we can describe
the orientation on the board in the dts:

Create a right-handed coordinate system (x * -1; see the datasheet for the
axis) and rotate 180 degrees around the y axis because the device sits on
the back side from the display.

Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
---

this is what I've previously sent as a single patch already:
https://lore.kernel.org/linux-arm-kernel/20200120100722.30359-1-martin.kepplinger@puri.sm/

arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts | 3 +++
1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
index 15cc05c0d6cf..e2db3866bdee 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
@@ -550,6 +550,9 @@
reg = <0x6a>;
vdd-supply = <&reg_3v3_p>;
vddio-supply = <&reg_3v3_p>;
+ mount-matrix = "1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "-1";
};
};

--
2.20.1
\
 
 \ /
  Last update: 2020-02-05 15:31    [W:0.091 / U:1.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site