lkml.org 
[lkml]   [2020]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 6/8] scsi: ufs: Add dev ref clock gating wait time support
On 2020-02-05 10:50, Stanley Chu wrote:
> Hi Can,
>
> On Mon, 2020-02-03 at 01:17 -0800, Can Guo wrote:
>> In UFS version 3.0, a newly added attribute bRefClkGatingWaitTime
>> defines
>> the minimum time for which the reference clock is required by device
>> during
>> transition to LS-MODE or HIBERN8 state. Make this change to reflect
>> the new
>> requirement by adding delays before turning off the clock.
>>
>> Signed-off-by: Can Guo <cang@codeaurora.org>
>> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
>> ---
>> drivers/scsi/ufs/ufs.h | 3 +++
>> drivers/scsi/ufs/ufshcd.c | 40
>> ++++++++++++++++++++++++++++++++++++++++
>> 2 files changed, 43 insertions(+)
>>
>> diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
>> index cfe3803..304076e 100644
>> --- a/drivers/scsi/ufs/ufs.h
>> +++ b/drivers/scsi/ufs/ufs.h
>> @@ -167,6 +167,7 @@ enum attr_idn {
>> QUERY_ATTR_IDN_FFU_STATUS = 0x14,
>> QUERY_ATTR_IDN_PSA_STATE = 0x15,
>> QUERY_ATTR_IDN_PSA_DATA_SIZE = 0x16,
>> + QUERY_ATTR_IDN_REF_CLK_GATING_WAIT_TIME = 0x17,
>> };
>>
>> /* Descriptor idn for Query requests */
>> @@ -534,6 +535,8 @@ struct ufs_dev_info {
>> u16 wmanufacturerid;
>> /*UFS device Product Name */
>> u8 *model;
>> + u16 spec_version;
>> + u32 clk_gating_wait_us;
>> };
>>
>> /**
>> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
>> index e8f7f9d..d5c547b 100644
>> --- a/drivers/scsi/ufs/ufshcd.c
>> +++ b/drivers/scsi/ufs/ufshcd.c
>> @@ -91,6 +91,9 @@
>> /* default delay of autosuspend: 2000 ms */
>> #define RPM_AUTOSUSPEND_DELAY_MS 2000
>>
>> +/* Default value of wait time before gating device ref clock */
>> +#define UFSHCD_REF_CLK_GATING_WAIT_US 0xFF /* microsecs */
>> +
>> #define ufshcd_toggle_vreg(_dev, _vreg, _on) \
>> ({ \
>> int _ret; \
>> @@ -3281,6 +3284,37 @@ static inline int
>> ufshcd_read_unit_desc_param(struct ufs_hba *hba,
>> param_offset, param_read_buf, param_size);
>> }
>>
>> +static int ufshcd_get_ref_clk_gating_wait(struct ufs_hba *hba)
>> +{
>> + int err = 0;
>> + u32 gating_wait = UFSHCD_REF_CLK_GATING_WAIT_US;
>> +
>> + if (hba->dev_info.spec_version >= 0x300) {
>> + err = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR,
>> + QUERY_ATTR_IDN_REF_CLK_GATING_WAIT_TIME, 0, 0,
>> + &gating_wait);
>> + if (err)
>> + dev_err(hba->dev, "Failed reading bRefClkGatingWait. err = %d, use
>> default %uus\n",
>> + err, gating_wait);
>> +
>> + if (gating_wait == 0) {
>> + gating_wait = UFSHCD_REF_CLK_GATING_WAIT_US;
>> + dev_err(hba->dev, "Undefined ref clk gating wait time, use default
>> %uus\n",
>> + gating_wait);
>> + }
>> +
>> + /*
>> + * bRefClkGatingWaitTime defines the minimum time for which the
>> + * reference clock is required by device during transition from
>> + * HS-MODE to LS-MODE or HIBERN8 state. Give it more time to be
>> + * on the safe side.
>> + */
>> + hba->dev_info.clk_gating_wait_us = gating_wait + 50;
>
>
> Not sure if the additional 50us wait time here is too large.
>
> Is there any special reason to fix it as "50"?
>
>
> Thanks,
> Stanley
>

Hi Stanley,

We used to ask vendors about it, 50 is somehow agreed by them. Do you
have a
better value in mind?

For me, I just wanted to give it 10, so that we can directly use
usleep_range
with it, no need to decide whether to use udelay or usleep_range.

Thanks,
Can Guo.

>> &dev_info->model, SD_ASCII_STD);
>> @@ -7003,6 +7041,8 @@ static int ufshcd_device_params_init(struct
>> ufs_hba *hba)
>> goto out;
>> }
>>
>> + ufshcd_get_ref_clk_gating_wait(hba);
>> +
>> ufs_fixup_device_setup(hba);
>>
>> if (!ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_READ_FLAG,

\
 
 \ /
  Last update: 2020-02-05 05:53    [W:0.078 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site