lkml.org 
[lkml]   [2020]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 04/89] USB: serial: ir-usb: fix link-speed handling
Date
From: Johan Hovold <johan@kernel.org>

commit 17a0184ca17e288decdca8b2841531e34d49285f upstream.

Commit e0d795e4f36c ("usb: irda: cleanup on ir-usb module") added a USB
IrDA header with common defines, but mistakingly switched to using the
class-descriptor baud-rate bitmask values for the outbound header.

This broke link-speed handling for rates above 9600 baud, but a device
would also be able to operate at the default 9600 baud until a
link-speed request was issued (e.g. using the TCGETS ioctl).

Fixes: e0d795e4f36c ("usb: irda: cleanup on ir-usb module")
Cc: stable <stable@vger.kernel.org> # 2.6.27
Cc: Felipe Balbi <balbi@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/usb/serial/ir-usb.c | 20 ++++++++++----------
include/linux/usb/irda.h | 13 ++++++++++++-
2 files changed, 22 insertions(+), 11 deletions(-)

--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -339,34 +339,34 @@ static void ir_set_termios(struct tty_st

switch (baud) {
case 2400:
- ir_baud = USB_IRDA_BR_2400;
+ ir_baud = USB_IRDA_LS_2400;
break;
case 9600:
- ir_baud = USB_IRDA_BR_9600;
+ ir_baud = USB_IRDA_LS_9600;
break;
case 19200:
- ir_baud = USB_IRDA_BR_19200;
+ ir_baud = USB_IRDA_LS_19200;
break;
case 38400:
- ir_baud = USB_IRDA_BR_38400;
+ ir_baud = USB_IRDA_LS_38400;
break;
case 57600:
- ir_baud = USB_IRDA_BR_57600;
+ ir_baud = USB_IRDA_LS_57600;
break;
case 115200:
- ir_baud = USB_IRDA_BR_115200;
+ ir_baud = USB_IRDA_LS_115200;
break;
case 576000:
- ir_baud = USB_IRDA_BR_576000;
+ ir_baud = USB_IRDA_LS_576000;
break;
case 1152000:
- ir_baud = USB_IRDA_BR_1152000;
+ ir_baud = USB_IRDA_LS_1152000;
break;
case 4000000:
- ir_baud = USB_IRDA_BR_4000000;
+ ir_baud = USB_IRDA_LS_4000000;
break;
default:
- ir_baud = USB_IRDA_BR_9600;
+ ir_baud = USB_IRDA_LS_9600;
baud = 9600;
}

--- a/include/linux/usb/irda.h
+++ b/include/linux/usb/irda.h
@@ -119,11 +119,22 @@ struct usb_irda_cs_descriptor {
* 6 - 115200 bps
* 7 - 576000 bps
* 8 - 1.152 Mbps
- * 9 - 5 mbps
+ * 9 - 4 Mbps
* 10..15 - Reserved
*/
#define USB_IRDA_STATUS_LINK_SPEED 0x0f

+#define USB_IRDA_LS_NO_CHANGE 0
+#define USB_IRDA_LS_2400 1
+#define USB_IRDA_LS_9600 2
+#define USB_IRDA_LS_19200 3
+#define USB_IRDA_LS_38400 4
+#define USB_IRDA_LS_57600 5
+#define USB_IRDA_LS_115200 6
+#define USB_IRDA_LS_576000 7
+#define USB_IRDA_LS_1152000 8
+#define USB_IRDA_LS_4000000 9
+
/* The following is a 4-bit value used only for
* outbound header:
*

\
 
 \ /
  Last update: 2020-02-03 17:47    [W:0.250 / U:5.204 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site