lkml.org 
[lkml]   [2020]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 5/9] drm/bridge: ti-sn65dsi86: Read num lanes from the DP sink
On Wed 18 Dec 14:35 PST 2019, Douglas Anderson wrote:

> At least one panel hooked up to the bridge (AUO B116XAK01) only
> supports 1 lane of DP. Let's read this information and stop
> hardcoding 4 DP lanes.
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> Tested-by: Rob Clark <robdclark@gmail.com>
> Reviewed-by: Rob Clark <robdclark@gmail.com>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> ---
>
> Changes in v3: None
> Changes in v2: None
>
> drivers/gpu/drm/bridge/ti-sn65dsi86.c | 32 +++++++++++++++++++++++++--
> 1 file changed, 30 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> index d55d19759796..0fc9e97b2d98 100644
> --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> @@ -313,8 +313,7 @@ static int ti_sn_bridge_attach(struct drm_bridge *bridge)
> goto err_dsi_host;
> }
>
> - /* TODO: setting to 4 lanes always for now */
> - pdata->dp_lanes = 4;
> + /* TODO: setting to 4 MIPI lanes always for now */
> dsi->lanes = 4;
> dsi->format = MIPI_DSI_FMT_RGB888;
> dsi->mode_flags = MIPI_DSI_MODE_VIDEO;
> @@ -511,12 +510,41 @@ static void ti_sn_bridge_set_video_timings(struct ti_sn_bridge *pdata)
> usleep_range(10000, 10500); /* 10ms delay recommended by spec */
> }
>
> +static unsigned int ti_sn_get_max_lanes(struct ti_sn_bridge *pdata)
> +{
> + u8 data;
> + int ret;
> +
> + ret = drm_dp_dpcd_readb(&pdata->aux, DP_MAX_LANE_COUNT, &data);
> + if (ret != 1) {
> + DRM_DEV_ERROR(pdata->dev,
> + "Can't read lane count (%d); assuming 4\n", ret);
> + return 4;
> + }
> +
> + return data & DP_LANE_COUNT_MASK;
> +}
> +
> static void ti_sn_bridge_enable(struct drm_bridge *bridge)
> {
> struct ti_sn_bridge *pdata = bridge_to_ti_sn_bridge(bridge);
> unsigned int val;
> int ret;
>
> + /*
> + * Run with the maximum number of lanes that the DP sink supports.
> + *
> + * Depending use cases, we might want to revisit this later because:
> + * - It's plausible that someone may have run fewer lines to the
> + * sink than the sink actually supports, assuming that the lines
> + * will just be driven at a higher rate.
> + * - The DP spec seems to indicate that it's more important to minimize
> + * the number of lanes than the link rate.
> + *
> + * If we do revisit, it would be important to measure the power impact.
> + */
> + pdata->dp_lanes = ti_sn_get_max_lanes(pdata);
> +
> /* DSI_A lane config */
> val = CHA_DSI_LANES(4 - pdata->dsi->lanes);
> regmap_update_bits(pdata->regmap, SN_DSI_LANES_REG,
> --
> 2.24.1.735.g03f4e72817-goog
>

\
 
 \ /
  Last update: 2020-02-04 00:35    [W:0.198 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site