Messages in this thread | | | From | Heiko Stuebner <> | Subject | Re: [PATCH 1/2] ARM: dts: remove g-use-dma from rockchip usb nodes | Date | Sun, 01 Mar 2020 00:47:07 +0100 |
| |
Am Freitag, 28. Februar 2020, 12:39:21 CET schrieb Johan Jonker: > A test with the command below gives these errors: > > arch/arm/boot/dts/rv1108-elgin-r1.dt.yaml: usb@30180000: > 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+' > arch/arm/boot/dts/rv1108-evb.dt.yaml: usb@30180000: > 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+' > arch/arm/boot/dts/rk3228-evb.dt.yaml: usb@30040000: > 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+' > arch/arm/boot/dts/rk3229-evb.dt.yaml: usb@30040000: > 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+' > arch/arm/boot/dts/rk3229-xms6.dt.yaml: usb@30040000: > 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+' > > 'g-use-dma' is not a valid option in dwc2.yaml, so remove it > from all Rockchip dtsi files. > > make ARCH=arm dtbs_check > DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml > > Signed-off-by: Johan Jonker <jbx6244@gmail.com>
applied both patches for 5.7
Thanks Heiko
| |