lkml.org 
[lkml]   [2020]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH v2 2/2] net: phy: at803x: add PTP support for AR8031
Date
Add PHY timestamping to the Atheros AR8031 PHY.

Signed-off-by: Michael Walle <michael@walle.cc>
---
drivers/net/phy/Kconfig | 17 +
drivers/net/phy/at803x.c | 855 +++++++++++++++++++++++++++++++++++++--
2 files changed, 847 insertions(+), 25 deletions(-)

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 9dabe03a668c..f3d4655af436 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -462,6 +462,23 @@ config AT803X_PHY
help
Currently supports the AR8030, AR8031, AR8033 and AR8035 model

+if AT803X_PHY
+config AT8031_PHY_TIMESTAMPING
+ bool "Enable PHY timestamping support"
+ depends on NETWORK_PHY_TIMESTAMPING
+ depends on PTP_1588_CLOCK
+ help
+ Enable the IEEE1588 features for the AR8031 PHY.
+
+ This driver adds support for using the AR8031 as a PTP
+ clock. This clock is only useful if your PTP programs are
+ getting hardware time stamps on the PTP Ethernet packets
+ using the SO_TIMESTAMPING API.
+
+ In order for this to work, your MAC driver must also
+ implement the skb_tx_timestamp() function.
+endif
+
config QSEMI_PHY
tristate "Quality Semiconductor PHYs"
---help---
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 481cf48c9b9e..1ec1ad70de21 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -11,10 +11,14 @@
#include <linux/module.h>
#include <linux/string.h>
#include <linux/netdevice.h>
+#include <linux/net_tstamp.h>
#include <linux/etherdevice.h>
#include <linux/of_gpio.h>
#include <linux/bitfield.h>
#include <linux/gpio/consumer.h>
+#include <linux/if_vlan.h>
+#include <linux/ptp_classify.h>
+#include <linux/ptp_clock_kernel.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/consumer.h>
@@ -30,17 +34,25 @@
#define AT803X_SS_MDIX BIT(6)

#define AT803X_INTR_ENABLE 0x12
-#define AT803X_INTR_ENABLE_AUTONEG_ERR BIT(15)
-#define AT803X_INTR_ENABLE_SPEED_CHANGED BIT(14)
-#define AT803X_INTR_ENABLE_DUPLEX_CHANGED BIT(13)
-#define AT803X_INTR_ENABLE_PAGE_RECEIVED BIT(12)
-#define AT803X_INTR_ENABLE_LINK_FAIL BIT(11)
-#define AT803X_INTR_ENABLE_LINK_SUCCESS BIT(10)
-#define AT803X_INTR_ENABLE_WIRESPEED_DOWNGRADE BIT(5)
-#define AT803X_INTR_ENABLE_POLARITY_CHANGED BIT(1)
-#define AT803X_INTR_ENABLE_WOL BIT(0)
-
#define AT803X_INTR_STATUS 0x13
+#define AT803X_INTR_AUTONEG_ERR BIT(15)
+#define AT803X_INTR_SPEED_CHANGED BIT(14)
+#define AT803X_INTR_DUPLEX_CHANGED BIT(13)
+#define AT803X_INTR_PAGE_RECEIVED BIT(12)
+#define AT803X_INTR_LINK_FAIL BIT(11)
+#define AT803X_INTR_LINK_SUCCESS BIT(10)
+#define AT803X_INTR_WIRESPEED_DOWNGRADE BIT(5)
+#define AT8031_INTR_10MS_PTP BIT(4)
+#define AT8031_INTR_RX_PTP BIT(3)
+#define AT8031_INTR_TX_PTP BIT(2)
+#define AT803X_INTR_POLARITY_CHANGED BIT(1)
+#define AT803X_INTR_WOL BIT(0)
+
+#define AT803X_INTR_LINK_CHANGE_MASK (AT803X_INTR_AUTONEG_ERR \
+ | AT803X_INTR_SPEED_CHANGED \
+ | AT803X_INTR_DUPLEX_CHANGED \
+ | AT803X_INTR_LINK_FAIL \
+ | AT803X_INTR_LINK_SUCCESS)

#define AT803X_SMART_SPEED 0x14
#define AT803X_LED_CONTROL 0x18
@@ -113,7 +125,19 @@ MODULE_DESCRIPTION("Qualcomm Atheros AR803x PHY driver");
MODULE_AUTHOR("Matus Ujhelyi");
MODULE_LICENSE("GPL");

+#define MAX_RXTS 32
+#define SKB_TIMESTAMP_TIMEOUT 5 /* jiffies */
+
+struct rxts {
+ struct list_head list;
+ unsigned long tmo;
+ struct timespec64 ts;
+ u16 seqid;
+};
+
struct at803x_priv {
+ struct phy_device *phydev;
+ struct mii_timestamper mii_ts;
int flags;
#define AT803X_KEEP_PLL_ENABLED BIT(0) /* don't turn off internal PLL */
u16 clk_25m_reg;
@@ -121,6 +145,21 @@ struct at803x_priv {
struct regulator_dev *vddio_rdev;
struct regulator_dev *vddh_rdev;
struct regulator *vddio;
+ struct ptp_clock *ptp_clock;
+ struct ptp_clock_info ptp_info;
+ struct delayed_work ts_work;
+ int hwts_tx_en;
+ int hwts_rx_en;
+ struct timespec64 last_txts;
+ struct timespec64 last_rxts;
+ /* list of rx timestamps */
+ struct list_head rxts;
+ struct list_head rxpool;
+ struct rxts rx_pool_data[MAX_RXTS];
+ /* protects above three fields from concurrent access */
+ spinlock_t rx_lock;
+ struct sk_buff_head rx_queue;
+ struct sk_buff_head tx_queue;
};

struct at803x_context {
@@ -235,14 +274,14 @@ static int at803x_set_wol(struct phy_device *phydev,
mac[(i * 2) + 1] | (mac[(i * 2)] << 8));

value = phy_read(phydev, AT803X_INTR_ENABLE);
- value |= AT803X_INTR_ENABLE_WOL;
+ value |= AT803X_INTR_WOL;
ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
if (ret)
return ret;
value = phy_read(phydev, AT803X_INTR_STATUS);
} else {
value = phy_read(phydev, AT803X_INTR_ENABLE);
- value &= (~AT803X_INTR_ENABLE_WOL);
+ value &= (~AT803X_INTR_WOL);
ret = phy_write(phydev, AT803X_INTR_ENABLE, value);
if (ret)
return ret;
@@ -261,7 +300,7 @@ static void at803x_get_wol(struct phy_device *phydev,
wol->wolopts = 0;

value = phy_read(phydev, AT803X_INTR_ENABLE);
- if (value & AT803X_INTR_ENABLE_WOL)
+ if (value & AT803X_INTR_WOL)
wol->wolopts |= WAKE_MAGIC;
}

@@ -271,7 +310,7 @@ static int at803x_suspend(struct phy_device *phydev)
int wol_enabled;

value = phy_read(phydev, AT803X_INTR_ENABLE);
- wol_enabled = value & AT803X_INTR_ENABLE_WOL;
+ wol_enabled = value & AT803X_INTR_WOL;

if (wol_enabled)
value = BMCR_ISOLATE;
@@ -475,6 +514,694 @@ static int at803x_parse_dt(struct phy_device *phydev)
return 0;
}

+static int at8031_ptp_enable(struct ptp_clock_info *ptp,
+ struct ptp_clock_request *rq, int on)
+{
+ return -EOPNOTSUPP;
+}
+
+#define AT8031_MMD3_PTP_CTRL 0x8012
+#define AT8031_WOL_EN BIT(5)
+#define AT8031_PTP_TS_ATTACH_EN BIT(4)
+#define AT8031_PTP_BYPASS BIT(3)
+#define AT8031_PTP_CLK_MODE_MASK GENMASK(2, 1)
+#define AT8031_PTP_CLK_MODE_BC_1STEP 0
+#define AT8031_PTP_CLK_MODE_BC_2STEP 1
+#define AT8031_PTP_CLK_MODE_TC_1STEP 2
+#define AT8031_PTP_CLK_MODE_TC_2STEP 3
+#define AT8031_MMD3_RX_SEQID 0x8013
+#define AT8031_MMD3_RX_TS 0x8019
+#define AT8031_MMD3_RX_MSG_TYPE 0x801e
+#define AT8031_MMD3_TX_SEQID 0x8020
+#define AT8031_MMD3_TX_TS 0x8026
+#define AT8031_MMD3_TX_MSG_TYPE 0x802b
+#define AT8031_MSG_TYPE_MASK GENMASK(15, 12)
+
+struct at8031_skb_info {
+ int ptp_type;
+ unsigned long tmo;
+};
+
+/* INC_VALUE[25:20] is the nanoseconds part,
+ * INC_VALUE[19:0] is the sub-nanoseconds fractional part
+ */
+#define AT8031_MMD3_RTC_INC_1 0x8036 /* INC_VALUE[25:10] */
+#define AT8031_MMD3_RTC_INC_0 0x8037 /* INC_VALUE[9:0] */
+
+/* Internal PLL has a nomial clock frequency of 125MHz */
+#define NOMINAL_INC_VALUE ((1000000000 / 125000000) << 20)
+
+#define AT8031_MMD3_RTC_OFFSET_NSEC_1 0x8038 /* NANO_OFFSET[31:16] */
+#define AT8031_MMD3_RTC_OFFSET_NSEC_0 0x8039 /* NANO_OFFSET[15:0] */
+
+#define AT8031_MMD3_RTC_OFFSET_SEC_2 0x803a /* SEC_OFFSET[47:32] */
+#define AT8031_MMD3_RTC_OFFSET_SEC_1 0x803b /* SEC_OFFSET[31:16] */
+#define AT8031_MMD3_RTC_OFFSET_SEC_0 0x803c /* SEC_OFFSET[15:0] */
+
+#define AT8031_MMD3_RTC 0x803d
+
+#define AT8031_TS_SEC_2 0 /* TS_SEC[47:32] */
+#define AT8031_TS_SEC_1 1 /* TS_SEC[31:16] */
+#define AT8031_TS_SEC_0 2 /* TS_SEC[15:0] */
+#define AT8031_TS_NSEC_1 3 /* TS_NSEC[31:16] */
+#define AT8031_TS_NSEC_0 4 /* TS_NSEC[15:0] */
+#define AT8031_TS_FRAC_1 5 /* TS_FRAC_NANO[19:4] */
+#define AT8031_TS_FRAC_0 6 /* TS_FRAC_NANO[3:0] */
+
+#define AT8031_MMD3_RTC_ADJUST 0x8044
+#define AT8031_RTC_ADJUST BIT(0)
+
+static int at8031_read_ts(struct phy_device *phydev, int off,
+ struct timespec64 *ts)
+{
+ time64_t sec, tmp;
+ long nsec;
+
+ tmp = phy_read_mmd(phydev, MDIO_MMD_PCS, off + AT8031_TS_SEC_2);
+ if (tmp < 0)
+ return tmp;
+ sec = tmp << 32;
+
+ tmp = phy_read_mmd(phydev, MDIO_MMD_PCS, off + AT8031_TS_SEC_1);
+ if (tmp < 0)
+ return tmp;
+ sec |= tmp << 16;
+
+ tmp = phy_read_mmd(phydev, MDIO_MMD_PCS, off + AT8031_TS_SEC_0);
+ if (tmp < 0)
+ return tmp;
+ sec |= tmp;
+
+ tmp = phy_read_mmd(phydev, MDIO_MMD_PCS, off + AT8031_TS_NSEC_1);
+ if (tmp < 0)
+ return tmp;
+ nsec = tmp << 16;
+
+ tmp = phy_read_mmd(phydev, MDIO_MMD_PCS, off + AT8031_TS_NSEC_0);
+ if (tmp < 0)
+ return tmp;
+ nsec |= tmp;
+
+ ts->tv_sec = sec;
+ ts->tv_nsec = nsec;
+
+ return 0;
+}
+
+static int at8031_rtc_read(struct phy_device *phydev, struct timespec64 *ts)
+{
+ return at8031_read_ts(phydev, AT8031_MMD3_RTC, ts);
+}
+
+static void prune_rx_ts(struct at803x_priv *priv)
+{
+ struct list_head *this, *next;
+ struct rxts *rxts;
+
+ list_for_each_safe(this, next, &priv->rxts) {
+ rxts = list_entry(this, struct rxts, list);
+ if (time_after(jiffies, rxts->tmo)) {
+ list_del_init(&rxts->list);
+ list_add(&rxts->list, &priv->rxpool);
+ }
+ }
+}
+
+static int match(struct sk_buff *skb, unsigned int type, u16 seqid)
+{
+ u16 *pseqid;
+ unsigned int offset = 0;
+ u8 *data = skb_mac_header(skb);
+
+ if (type & PTP_CLASS_VLAN)
+ offset += VLAN_HLEN;
+
+ switch (type & PTP_CLASS_PMASK) {
+ case PTP_CLASS_IPV4:
+ offset += ETH_HLEN + IPV4_HLEN(data + offset) + UDP_HLEN;
+ break;
+ case PTP_CLASS_IPV6:
+ offset += ETH_HLEN + IP6_HLEN + UDP_HLEN;
+ break;
+ case PTP_CLASS_L2:
+ offset += ETH_HLEN;
+ break;
+ default:
+ return 0;
+ }
+
+ /* check sequence id */
+ if (skb->len + ETH_HLEN < offset + OFF_PTP_SEQUENCE_ID + sizeof(*pseqid))
+ return 0;
+
+ pseqid = (u16 *)(data + offset + OFF_PTP_SEQUENCE_ID);
+ if (seqid != ntohs(*pseqid))
+ return 0;
+
+ return 1;
+}
+
+static int at8031_get_rxts(struct phy_device *phydev)
+{
+ struct at803x_priv *priv = phydev->priv;
+ struct skb_shared_hwtstamps *shhwtstamps = NULL;
+ struct timespec64 ts, saved_ts;
+ struct sk_buff *skb;
+ unsigned long flags;
+ struct rxts *rxts;
+ int msg_type;
+ int seqid;
+ int ret;
+
+ ret = at8031_read_ts(phydev, AT8031_MMD3_RX_TS, &ts);
+ if (ret < 0)
+ return ret;
+
+ /* AR8031 generates an interrupt on any PTP packet. No timestamp,
+ * messageType and sequenceId fields will change. Thus check if we already
+ * received that timestamp. If so, ignore it.
+ */
+ if (timespec64_equal(&priv->last_rxts, &ts))
+ return 0;
+ priv->last_rxts = ts;
+
+again:
+ saved_ts = ts;
+
+ seqid = phy_read_mmd(phydev, MDIO_MMD_PCS, AT8031_MMD3_RX_SEQID);
+ if (seqid < 0)
+ return seqid;
+
+ msg_type = phy_read_mmd(phydev, MDIO_MMD_PCS, AT8031_MMD3_RX_MSG_TYPE);
+ if (msg_type < 0)
+ return msg_type;
+ msg_type = FIELD_GET(AT8031_MSG_TYPE_MASK, msg_type);
+
+ /* Unfortunately, there is no way to atomically read the timestamps.
+ * Read the timestamp again and compare to saved value.
+ */
+ ret = at8031_read_ts(phydev, AT8031_MMD3_RX_TS, &ts);
+ if (ret < 0)
+ return ret;
+ if (!timespec64_equal(&saved_ts, &ts))
+ goto again;
+
+ spin_lock_irqsave(&priv->rx_lock, flags);
+
+ prune_rx_ts(priv);
+
+ if (list_empty(&priv->rxpool)) {
+ phydev_dbg(phydev, "rx timestamp pool is empty\n");
+ goto out;
+ }
+ rxts = list_first_entry(&priv->rxpool, struct rxts, list);
+ list_del_init(&rxts->list);
+
+ rxts->seqid = seqid;
+ rxts->ts = ts;
+ rxts->tmo = jiffies + SKB_TIMESTAMP_TIMEOUT;
+
+ spin_lock(&priv->rx_queue.lock);
+ skb_queue_walk(&priv->rx_queue, skb) {
+ struct at8031_skb_info *skb_info;
+
+ skb_info = (struct at8031_skb_info *)skb->cb;
+ if (match(skb, skb_info->ptp_type, rxts->seqid)) {
+ __skb_unlink(skb, &priv->rx_queue);
+ shhwtstamps = skb_hwtstamps(skb);
+ memset(shhwtstamps, 0, sizeof(*shhwtstamps));
+ shhwtstamps->hwtstamp = timespec64_to_ktime(rxts->ts);
+ list_add(&rxts->list, &priv->rxpool);
+ break;
+ }
+ }
+ spin_unlock(&priv->rx_queue.lock);
+
+ if (!shhwtstamps)
+ list_add_tail(&rxts->list, &priv->rxts);
+out:
+ spin_unlock_irqrestore(&priv->rx_lock, flags);
+
+ if (shhwtstamps)
+ netif_rx_ni(skb);
+
+ return 0;
+}
+
+static int at8031_get_txts(struct phy_device *phydev)
+{
+ struct at803x_priv *priv = phydev->priv;
+ struct skb_shared_hwtstamps shhwtstamps;
+ struct at8031_skb_info *skb_info;
+ struct timespec64 ts, saved_ts;
+ struct sk_buff *skb;
+ int msg_type;
+ int seqid;
+ int ret;
+
+ ret = at8031_read_ts(phydev, AT8031_MMD3_TX_TS, &ts);
+ if (ret < 0)
+ return ret;
+
+ /* AR8031 generates an interrupt on any PTP packet. No timestamp,
+ * messageType and sequenceId fields will change. Thus check if we already
+ * received that timestamp. If so, ignore it.
+ */
+ if (timespec64_equal(&priv->last_txts, &ts))
+ return 0;
+ priv->last_txts = ts;
+
+again_ts:
+ saved_ts = ts;
+
+ seqid = phy_read_mmd(phydev, MDIO_MMD_PCS, AT8031_MMD3_TX_SEQID);
+ if (seqid < 0)
+ return seqid;
+
+ msg_type = phy_read_mmd(phydev, MDIO_MMD_PCS, AT8031_MMD3_TX_MSG_TYPE);
+ if (msg_type < 0)
+ return msg_type;
+ msg_type = FIELD_GET(AT8031_MSG_TYPE_MASK, msg_type);
+
+ /* Unfortunately, there is no way to atomically read the timestamps.
+ * Read the timestamp again and compare to saved value.
+ */
+ ret = at8031_read_ts(phydev, AT8031_MMD3_TX_TS, &ts);
+ if (ret < 0)
+ return ret;
+ if (!timespec64_equal(&saved_ts, &ts))
+ goto again_ts;
+
+ /* We must already have the skb that triggered this. */
+again:
+ skb = skb_dequeue(&priv->tx_queue);
+ if (!skb) {
+ phydev_dbg(phydev, "have timestamp but tx_queue empty\n");
+ return 0;
+ }
+
+ skb_info = (struct at8031_skb_info *)skb->cb;
+ if (time_after(jiffies, skb_info->tmo)) {
+ kfree_skb(skb);
+ goto again;
+ }
+
+ if (!match(skb, skb_info->ptp_type, seqid)) {
+ kfree_skb(skb);
+ goto again;
+ }
+
+ memset(&shhwtstamps, 0, sizeof(shhwtstamps));
+ shhwtstamps.hwtstamp = timespec64_to_ktime(ts);
+ skb_complete_tx_timestamp(skb, &shhwtstamps);
+
+ return 0;
+}
+
+static int at8031_rtc_adjust(struct phy_device *phydev, s64 delta)
+{
+ struct timespec64 ts = ns_to_timespec64(delta);
+ int ret;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
+ AT8031_MMD3_RTC_OFFSET_SEC_2,
+ (ts.tv_sec >> 32) & 0xffff);
+ if (ret)
+ return ret;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
+ AT8031_MMD3_RTC_OFFSET_SEC_1,
+ (ts.tv_sec >> 16) & 0xffff);
+ if (ret)
+ return ret;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
+ AT8031_MMD3_RTC_OFFSET_SEC_0,
+ ts.tv_sec & 0xffff);
+ if (ret)
+ return ret;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
+ AT8031_MMD3_RTC_OFFSET_NSEC_1,
+ (ts.tv_nsec >> 16) & 0xffff);
+ if (ret)
+ return ret;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
+ AT8031_MMD3_RTC_OFFSET_NSEC_0,
+ ts.tv_nsec & 0xffff);
+ if (ret)
+ return ret;
+
+ return phy_write_mmd(phydev, MDIO_MMD_PCS, AT8031_MMD3_RTC_ADJUST,
+ AT8031_RTC_ADJUST);
+}
+
+static int at8031_ptp_gettimex64(struct ptp_clock_info *ptp,
+ struct timespec64 *ts,
+ struct ptp_system_timestamp *sts)
+{
+ struct at803x_priv *priv =
+ container_of(ptp, struct at803x_priv, ptp_info);
+ struct phy_device *phydev = priv->phydev;
+ int ret;
+
+ /* AR8031 doesn't provide a method to read the time atomically. So just
+ * do our best here. Make sure we start with MSB so we cannot read a
+ * future time accidentially.
+ */
+
+ ptp_read_system_prets(sts);
+ ret = at8031_rtc_read(phydev, ts);
+ ptp_read_system_postts(sts);
+
+ return ret;
+}
+
+static s32 at8031_rtc_get_inc(struct phy_device *phydev)
+{
+ s32 v1, v0;
+
+ v1 = phy_read_mmd(phydev, MDIO_MMD_PCS, AT8031_MMD3_RTC_INC_1);
+ if (v1 < 0)
+ return v1;
+
+ v0 = phy_read_mmd(phydev, MDIO_MMD_PCS, AT8031_MMD3_RTC_INC_0);
+ if (v0 < 0)
+ return v0;
+
+ return (v1 & 0xffff) << 10 | (v0 & 0x3ff);
+}
+
+static int at8031_rtc_set_inc(struct phy_device *phydev, u32 inc)
+{
+ int ret;
+
+ ret = phy_write_mmd(phydev, MDIO_MMD_PCS, AT8031_MMD3_RTC_INC_1,
+ (inc >> 10) & 0xffff);
+ if (ret)
+ return ret;
+
+ return phy_write_mmd(phydev, MDIO_MMD_PCS, AT8031_MMD3_RTC_INC_0,
+ inc & 0x3ff);
+}
+
+static int at8031_ptp_adjfine(struct ptp_clock_info *ptp, long scaled_ppm)
+{
+ struct at803x_priv *priv =
+ container_of(ptp, struct at803x_priv, ptp_info);
+ struct phy_device *phydev = priv->phydev;
+ bool neg_adj = false;
+ u32 inc_val;
+ u64 adj;
+
+ if (scaled_ppm < 0) {
+ neg_adj = true;
+ scaled_ppm = -scaled_ppm;
+ }
+
+ inc_val = NOMINAL_INC_VALUE;
+ adj = scaled_ppm << 4;
+ adj = div_u64(adj, 125000);
+ inc_val = neg_adj ? inc_val - adj : inc_val + adj;
+
+ return at8031_rtc_set_inc(phydev, inc_val);
+}
+
+static int at8031_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
+{
+ struct at803x_priv *priv =
+ container_of(ptp, struct at803x_priv, ptp_info);
+ struct phy_device *phydev = priv->phydev;
+
+ return at8031_rtc_adjust(phydev, delta);
+}
+
+static int at8031_ptp_settime64(struct ptp_clock_info *ptp,
+ const struct timespec64 *ts)
+{
+ struct at803x_priv *priv =
+ container_of(ptp, struct at803x_priv, ptp_info);
+ struct phy_device *phydev = priv->phydev;
+ struct timespec64 tts;
+ s32 saved_inc;
+ s64 delta;
+ int ret;
+
+ /* This is how we set the clock:
+ * (1) save the inc_value
+ * (2) stop the clock by setting inc_value to zero
+ * (3) get the clock
+ * (4) set the difference
+ * (5) restore the previous inc_value
+ */
+
+ saved_inc = at8031_rtc_get_inc(phydev);
+ if (saved_inc < 0)
+ return saved_inc;
+
+ ret = at8031_rtc_set_inc(phydev, 0);
+ if (ret)
+ return ret;
+
+ ret = at8031_rtc_read(phydev, &tts);
+ if (ret)
+ return ret;
+
+ tts = timespec64_sub(*ts, tts);
+ delta = timespec64_to_ns(&tts);
+
+ ret = at8031_rtc_adjust(phydev, delta);
+ if (ret)
+ return ret;
+
+ return at8031_rtc_set_inc(phydev, saved_inc);
+}
+
+static struct ptp_clock_info at8031_ptp_info = {
+ .owner = THIS_MODULE,
+ .name = "ar8031 ptp clock",
+ .enable = at8031_ptp_enable,
+ .adjtime = at8031_ptp_adjtime,
+ .adjfine = at8031_ptp_adjfine,
+ .gettimex64 = at8031_ptp_gettimex64,
+ .settime64 = at8031_ptp_settime64,
+ .max_adj = 1000000000,
+};
+
+static int at8031_ptp_configure(struct phy_device *phydev, bool on)
+{
+ int val;
+
+ val = phy_read_mmd(phydev, MDIO_MMD_PCS, AT8031_MMD3_PTP_CTRL);
+ if (val < 0)
+ return val;
+
+ /* Disable attaching of any RX timestamp to the packet. We'd have to
+ * fixup every PTP event packet in this driver.
+ *
+ * Also it seems that it will only works with RGMII and not SGMII.
+ */
+ val &= ~AT8031_PTP_TS_ATTACH_EN;
+
+ if (on)
+ val &= ~AT8031_PTP_BYPASS;
+ else
+ val |= AT8031_PTP_BYPASS;
+
+ val &= ~AT8031_PTP_CLK_MODE_MASK;
+ val |= FIELD_PREP(AT8031_PTP_CLK_MODE_MASK,
+ AT8031_PTP_CLK_MODE_BC_1STEP);
+
+ return phy_write_mmd(phydev, MDIO_MMD_PCS, AT8031_MMD3_PTP_CTRL, val);
+}
+
+static void rx_timestamp_work(struct work_struct *work)
+{
+ struct at803x_priv *priv =
+ container_of(work, struct at803x_priv, ts_work.work);
+ struct sk_buff *skb;
+
+ /* Deliver expired packets. */
+ while ((skb = skb_dequeue(&priv->rx_queue))) {
+ struct at8031_skb_info *skb_info;
+
+ skb_info = (struct at8031_skb_info *)skb->cb;
+ if (!time_after(jiffies, skb_info->tmo)) {
+ skb_queue_head(&priv->rx_queue, skb);
+ break;
+ }
+
+ netif_rx_ni(skb);
+ }
+
+ if (!skb_queue_empty(&priv->rx_queue))
+ schedule_delayed_work(&priv->ts_work, SKB_TIMESTAMP_TIMEOUT);
+}
+
+static int at8031_ts_info(struct mii_timestamper *mii_ts,
+ struct ethtool_ts_info *info)
+{
+ struct at803x_priv *priv =
+ container_of(mii_ts, struct at803x_priv, mii_ts);
+
+ info->so_timestamping =
+ SOF_TIMESTAMPING_TX_HARDWARE |
+ SOF_TIMESTAMPING_RX_HARDWARE |
+ SOF_TIMESTAMPING_RAW_HARDWARE;
+ info->phc_index = ptp_clock_index(priv->ptp_clock);
+ info->tx_types =
+ (1 << HWTSTAMP_TX_OFF) |
+ (1 << HWTSTAMP_TX_ON);
+ info->rx_filters =
+ (1 << HWTSTAMP_FILTER_NONE) |
+ (1 << HWTSTAMP_FILTER_PTP_V2_EVENT);
+ return 0;
+}
+
+static bool at8031_rxtstamp(struct mii_timestamper *mii_ts,
+ struct sk_buff *skb, int type)
+{
+ struct at803x_priv *priv =
+ container_of(mii_ts, struct at803x_priv, mii_ts);
+ struct at8031_skb_info *skb_info = (struct at8031_skb_info *)skb->cb;
+ struct list_head *this, *next;
+ struct rxts *rxts;
+ struct skb_shared_hwtstamps *shhwtstamps = NULL;
+ unsigned long flags;
+
+ if (!priv->hwts_rx_en)
+ return false;
+
+ if (!(type & PTP_CLASS_V2))
+ return false;
+
+ spin_lock_irqsave(&priv->rx_lock, flags);
+ prune_rx_ts(priv);
+ list_for_each_safe(this, next, &priv->rxts) {
+ rxts = list_entry(this, struct rxts, list);
+ if (match(skb, type, rxts->seqid)) {
+ shhwtstamps = skb_hwtstamps(skb);
+ memset(shhwtstamps, 0, sizeof(*shhwtstamps));
+ shhwtstamps->hwtstamp = timespec64_to_ktime(rxts->ts);
+ list_del_init(&rxts->list);
+ list_add(&rxts->list, &priv->rxpool);
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&priv->rx_lock, flags);
+
+ if (!shhwtstamps) {
+ skb_info->ptp_type = type;
+ skb_info->tmo = jiffies + SKB_TIMESTAMP_TIMEOUT;
+ skb_queue_tail(&priv->rx_queue, skb);
+ schedule_delayed_work(&priv->ts_work, SKB_TIMESTAMP_TIMEOUT);
+ } else {
+ netif_rx_ni(skb);
+ }
+
+ return true;
+}
+
+static void at8031_txtstamp(struct mii_timestamper *mii_ts,
+ struct sk_buff *skb, int type)
+{
+ struct at803x_priv *priv =
+ container_of(mii_ts, struct at803x_priv, mii_ts);
+ struct at8031_skb_info *skb_info = (struct at8031_skb_info *)skb->cb;
+
+ switch (priv->hwts_tx_en) {
+ case HWTSTAMP_TX_ON:
+ skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+ skb_info->tmo = jiffies + SKB_TIMESTAMP_TIMEOUT;
+ skb_info->ptp_type = type;
+ skb_queue_tail(&priv->tx_queue, skb);
+ break;
+
+ case HWTSTAMP_TX_OFF:
+ default:
+ kfree_skb(skb);
+ break;
+ }
+}
+
+static int at8031_hwtstamp(struct mii_timestamper *mii_ts, struct ifreq *ifr)
+{
+ struct at803x_priv *priv =
+ container_of(mii_ts, struct at803x_priv, mii_ts);
+ struct hwtstamp_config cfg;
+
+ if (copy_from_user(&cfg, ifr->ifr_data, sizeof(cfg)))
+ return -EFAULT;
+
+ if (cfg.flags) /* reserved for future extensions */
+ return -EINVAL;
+
+ if (cfg.tx_type < 0 || cfg.tx_type > HWTSTAMP_TX_ON)
+ return -ERANGE;
+
+ priv->hwts_tx_en = cfg.tx_type;
+
+ switch (cfg.rx_filter) {
+ case HWTSTAMP_FILTER_NONE:
+ priv->hwts_rx_en = 0;
+ break;
+ case HWTSTAMP_FILTER_PTP_V2_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+ priv->hwts_rx_en = 1;
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ if (priv->hwts_tx_en || priv->hwts_rx_en)
+ at8031_ptp_configure(priv->phydev, true);
+ else
+ at8031_ptp_configure(priv->phydev, false);
+
+ return copy_to_user(ifr->ifr_data, &cfg, sizeof(cfg)) ? -EFAULT : 0;
+}
+
+static int at8031_ptp_probe(struct phy_device *phydev)
+{
+ struct at803x_priv *priv = phydev->priv;
+ struct device *dev = &phydev->mdio.dev;
+ int i;
+
+ if (!IS_ENABLED(CONFIG_AT8031_PHY_TIMESTAMPING))
+ return 0;
+
+ priv->mii_ts.rxtstamp = at8031_rxtstamp,
+ priv->mii_ts.txtstamp = at8031_txtstamp,
+ priv->mii_ts.hwtstamp = at8031_hwtstamp,
+ priv->mii_ts.ts_info = at8031_ts_info,
+
+ phydev->mii_ts = &priv->mii_ts;
+
+ /* We have to keep the PLL running otherwise the RTC won't count. */
+ priv->flags |= AT803X_KEEP_PLL_ENABLED;
+ at8031_rtc_set_inc(priv->phydev, NOMINAL_INC_VALUE);
+
+ priv->ptp_info = at8031_ptp_info;
+ priv->ptp_clock = ptp_clock_register(&priv->ptp_info, dev);
+ if (IS_ERR(priv->ptp_clock))
+ return PTR_ERR(priv->ptp_clock);
+
+ INIT_DELAYED_WORK(&priv->ts_work, rx_timestamp_work);
+
+ INIT_LIST_HEAD(&priv->rxts);
+ INIT_LIST_HEAD(&priv->rxpool);
+ for (i = 0; i < MAX_RXTS; i++)
+ list_add(&priv->rx_pool_data[i].list, &priv->rxpool);
+
+ spin_lock_init(&priv->rx_lock);
+ skb_queue_head_init(&priv->rx_queue);
+ skb_queue_head_init(&priv->tx_queue);
+
+ return 0;
+}
+
static int at803x_probe(struct phy_device *phydev)
{
struct device *dev = &phydev->mdio.dev;
@@ -485,6 +1212,7 @@ static int at803x_probe(struct phy_device *phydev)
return -ENOMEM;

phydev->priv = priv;
+ priv->phydev = phydev;

return at803x_parse_dt(phydev);
}
@@ -497,6 +1225,88 @@ static void at803x_remove(struct phy_device *phydev)
regulator_disable(priv->vddio);
}

+static irqreturn_t at8031_interrupt(int irq, void *data)
+{
+ struct phy_device *phydev = data;
+ int mask;
+
+ mask = phy_read(phydev, AT803X_INTR_STATUS);
+ if (mask < 0)
+ return IRQ_NONE;
+
+ if (mask & AT803X_INTR_LINK_CHANGE_MASK)
+ phy_mac_interrupt(phydev);
+
+ if (IS_ENABLED(CONFIG_AT8031_PHY_TIMESTAMPING)) {
+ if (mask & AT8031_INTR_RX_PTP)
+ at8031_get_rxts(phydev);
+ if (mask & AT8031_INTR_TX_PTP)
+ at8031_get_txts(phydev);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int at8031_probe(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->mdio.dev;
+ struct at803x_priv *priv;
+ u16 mask;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ phydev->priv = priv;
+ priv->phydev = phydev;
+
+ ret = at8031_ptp_probe(phydev);
+ if (ret)
+ return ret;
+
+ if (!phy_polling_mode(phydev)) {
+ ret = request_threaded_irq(phydev->irq, NULL, at8031_interrupt,
+ IRQF_ONESHOT | IRQF_SHARED,
+ phydev_name(phydev), phydev);
+ if (ret)
+ return ret;
+
+ mask = AT803X_INTR_LINK_CHANGE_MASK;
+ if (IS_ENABLED(CONFIG_AT8031_PHY_TIMESTAMPING))
+ mask |= AT8031_INTR_RX_PTP | AT8031_INTR_TX_PTP;
+
+ /* clear pending interrupts */
+ ret = phy_read(phydev, AT803X_INTR_STATUS);
+ if (ret < 0)
+ return ret;
+
+ ret = phy_write(phydev, AT803X_INTR_ENABLE, mask);
+ if (ret)
+ return ret;
+ }
+
+ return at803x_parse_dt(phydev);
+}
+
+static void at8031_remove(struct phy_device *phydev)
+{
+ struct at803x_priv *priv = phydev->priv;
+
+ phydev->mii_ts = NULL;
+
+ cancel_delayed_work_sync(&priv->ts_work);
+
+ skb_queue_purge(&priv->rx_queue);
+ skb_queue_purge(&priv->tx_queue);
+
+ if (priv->ptp_clock)
+ ptp_clock_unregister(priv->ptp_clock);
+
+ if (priv->vddio)
+ regulator_disable(priv->vddio);
+}
+
static int at803x_clk_out_config(struct phy_device *phydev)
{
struct at803x_priv *priv = phydev->priv;
@@ -585,13 +1395,9 @@ static int at803x_config_intr(struct phy_device *phydev)
value = phy_read(phydev, AT803X_INTR_ENABLE);

if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
- value |= AT803X_INTR_ENABLE_AUTONEG_ERR;
- value |= AT803X_INTR_ENABLE_SPEED_CHANGED;
- value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED;
- value |= AT803X_INTR_ENABLE_LINK_FAIL;
- value |= AT803X_INTR_ENABLE_LINK_SUCCESS;
-
- err = phy_write(phydev, AT803X_INTR_ENABLE, value);
+ value |= AT803X_INTR_LINK_CHANGE_MASK;
+ err = phy_write(phydev, AT803X_INTR_ENABLE,
+ AT803X_INTR_LINK_CHANGE_MASK);
}
else
err = phy_write(phydev, AT803X_INTR_ENABLE, 0);
@@ -750,8 +1556,9 @@ static struct phy_driver at803x_driver[] = {
.phy_id = ATH8031_PHY_ID,
.name = "Qualcomm Atheros AR8031/AR8033",
.phy_id_mask = AT803X_PHY_ID_MASK,
- .probe = at803x_probe,
- .remove = at803x_remove,
+ .flags = PHY_HAS_OWN_IRQ_HANDLER,
+ .probe = at8031_probe,
+ .remove = at8031_remove,
.config_init = at803x_config_init,
.set_wol = at803x_set_wol,
.get_wol = at803x_get_wol,
@@ -760,8 +1567,6 @@ static struct phy_driver at803x_driver[] = {
/* PHY_GBIT_FEATURES */
.read_status = at803x_read_status,
.aneg_done = at803x_aneg_done,
- .ack_interrupt = &at803x_ack_interrupt,
- .config_intr = &at803x_config_intr,
}, {
/* ATHEROS AR9331 */
PHY_ID_MATCH_EXACT(ATH9331_PHY_ID),
--
2.20.1
\
 
 \ /
  Last update: 2020-02-28 19:03    [W:0.088 / U:22.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site