lkml.org 
[lkml]   [2020]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/4] watchdog: Add K3 RTI watchdog support
On Fri, Feb 28, 2020 at 04:23:30PM +0200, Tero Kristo wrote:
> Texas Instruments K3 SoCs contain an RTI (Real Time Interrupt) module
> which can be used as a watchdog. This IP provides a support for
> windowed watchdog mode, in which the watchdog must be petted within
> a certain time window. If it is petted either too soon, or too late,
> a watchdog error will be triggered.
>

This needs to be explained in detail in the driver itself. It doesn't
belong into the commit description.

> Signed-off-by: Tero Kristo <t-kristo@ti.com>
> ---
> drivers/watchdog/Kconfig | 8 ++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/rti_wdt.c | 250 +++++++++++++++++++++++++++++++++++++
> 3 files changed, 259 insertions(+)
> create mode 100644 drivers/watchdog/rti_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index cec868f8db3f..81faf47d44a6 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -583,6 +583,14 @@ config DAVINCI_WATCHDOG
> NOTE: once enabled, this timer cannot be disabled.
> Say N if you are unsure.
>
> +config K3_RTI_WATCHDOG
> + tristate "Texas Instruments K3 RTI watchdog"
> + depends on ARCH_K3 || COMPILE_TEST
> + select WATCHDOG_CORE
> + help
> + Say Y here if you want to include support for the K3 watchdog
> + timer (RTI module) available in the K3 generation of processors.
> +
> config ORION_WATCHDOG
> tristate "Orion watchdog"
> depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU || (COMPILE_TEST && !ARCH_EBSA110)
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 2ee352bf3372..6de2e4ceef19 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -57,6 +57,7 @@ obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
> obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
> obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o
> obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
> +obj-$(CONFIG_K3_RTI_WATCHDOG) += rti_wdt.o
> obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o
> obj-$(CONFIG_SUNXI_WATCHDOG) += sunxi_wdt.o
> obj-$(CONFIG_RN5T618_WATCHDOG) += rn5t618_wdt.o
> diff --git a/drivers/watchdog/rti_wdt.c b/drivers/watchdog/rti_wdt.c
> new file mode 100644
> index 000000000000..b0933b090f53
> --- /dev/null
> +++ b/drivers/watchdog/rti_wdt.c
> @@ -0,0 +1,250 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Watchdog driver for the K3 RTI module
> + *
> + * (c) Copyright 2019 Texas Instruments Inc.
> + * All rights reserved.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/types.h>
> +#include <linux/kernel.h>
> +#include <linux/watchdog.h>
> +#include <linux/platform_device.h>
> +#include <linux/io.h>
> +#include <linux/device.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/pm_runtime.h>

Alphabetic order, please.

> +
> +#define MODULE_NAME "rti-wdt"
> +#define DEFAULT_HEARTBEAT 60
> +#define MAX_HEARTBEAT 1000
> +
> +/* Timer register set definition */
> +#define RTIDWDCTRL 0x90
> +#define RTIDWDPRLD 0x94
> +#define RTIWDSTATUS 0x98
> +#define RTIWDKEY 0x9c
> +#define RTIDWDCNTR 0xa0
> +#define RTIWWDRXCTRL 0xa4
> +#define RTIWWDSIZECTRL 0xa8
> +
> +#define RTIWWDRX_NMI 0xa
> +
> +#define RTIWWDSIZE_50P 0x50
> +
> +#define WDENABLE_KEY 0xa98559da
> +
> +#define WDKEY_SEQ0 0xe51a
> +#define WDKEY_SEQ1 0xa35c
> +
> +#define WDT_PRELOAD_SHIFT 13
> +
> +#define WDT_PRELOAD_MAX 0xfff
> +
> +#define DWDST BIT(1)
> +
> +static int heartbeat;
> +
> +/*
> + * struct to hold data for each WDT device
> + * @base - base io address of WD device
> + * @clk - source clock of WDT
> + * @wdd - hold watchdog device as is in WDT core
> + */
> +struct rti_wdt_device {
> + void __iomem *base;
> + struct clk *clk;
> + struct watchdog_device wdd;
> +};
> +
> +static int rti_wdt_start(struct watchdog_device *wdd)
> +{
> + u32 timer_margin;
> + unsigned long freq;
> + struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd);
> +
> + freq = clk_get_rate(wdt->clk);
> +
Does this change at runtime ? Otherwise it would be less costly to
get the frequency in the probe function to avoid having to read it
multiple times.

> + /* set timeout period */
> + timer_margin = (u64)wdd->timeout * freq;
> + timer_margin >>= WDT_PRELOAD_SHIFT;
> + if (timer_margin > WDT_PRELOAD_MAX)
> + timer_margin = WDT_PRELOAD_MAX;
> + writel_relaxed(timer_margin, wdt->base + RTIDWDPRLD);
> +
So if freq is 0 (which can happen per code in rti_wdt_get_timeleft),
the value programmed into the chip will be 0.

> + /* Set min heartbeat to 1.1x window size */
> + wdd->min_hw_heartbeat_ms = 11 * wdd->timeout * 1000 / 20;

wdd->timeout is in seconds. If we assume it is set to 1 second,

11 * 1 * 1000 / 20 = 550.

With 10 seconds:
11 * 10 * 1000 / 20 = 5500

... meaning the next ping must not be earlier than 55%
of the timeout. This is highly unusual. Most watchdog daemons
will send pings earlier.

This warrants a detailed explanation. The purpose if min_hw_heartbeat_ms
is to prevent pings to be sent too closely because the HW can not handle
it otherwise. If that is what is happening here, and if pings indeed
need to be that far apart for somew reason, it needs to be documented
in the driver.

Also, "window size" is a misleading term. This is really 55%
of the configured timeout.

> +
> + /* Generate NMI when wdt expires */
> + writel_relaxed(RTIWWDRX_NMI, wdt->base + RTIWWDRXCTRL);
> +

What is the expected action ? Shouldn't there be an NMI handler ?

> + /* Window size 50% */
> + writel_relaxed(RTIWWDSIZE_50P, wdt->base + RTIWWDSIZECTRL);
> +

If the minimum ping interval is configurable, it should really be
set to a _much_ lower value. If that isn't feasible for some reason,
this reason needs to be explained in detail.

> + readl_relaxed(wdt->base + RTIWWDSIZECTRL);
> +
> + /* enable watchdog */
> + writel_relaxed(WDENABLE_KEY, wdt->base + RTIDWDCTRL);
> + return 0;
> +}
> +
> +static int rti_wdt_ping(struct watchdog_device *wdd)
> +{
> + struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd);
> +
> + /* put watchdog in service state */
> + writel_relaxed(WDKEY_SEQ0, wdt->base + RTIWDKEY);
> + /* put watchdog in active state */
> + writel_relaxed(WDKEY_SEQ1, wdt->base + RTIWDKEY);
> +
> + if (readl_relaxed(wdt->base + RTIWDSTATUS))
> + WARN_ON_ONCE(1);

What is the purpose of this warning/traceback, and what is the expected
reaction ? Some systems are set to reboot on warnings, so this may result
in a reboot. Unless such a reboot is warranted, I don't see the point of
forcing that. Have you considered dev_warn_once() instead ?

> +
> + return 0;
> +}
> +
> +static unsigned int rti_wdt_get_timeleft(struct watchdog_device *wdd)
> +{
> + u64 timer_counter;
> + unsigned long freq;
> + u32 val;
> + struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd);
> +
> + /* if timeout has occurred then return 0 */
> + val = readl_relaxed(wdt->base + RTIWDSTATUS);
> + if (val & DWDST)
> + return 0;
> +
> + freq = clk_get_rate(wdt->clk);
> + if (!freq)
> + return 0;
> +
> + timer_counter = readl_relaxed(wdt->base + RTIDWDCNTR);
> +
> + do_div(timer_counter, freq);
> +
> + return timer_counter;
> +}
> +
> +static const struct watchdog_info rti_wdt_info = {
> + .options = WDIOF_KEEPALIVEPING,
> + .identity = "K3 RTI Watchdog",
> +};
> +
> +static const struct watchdog_ops rti_wdt_ops = {
> + .owner = THIS_MODULE,
> + .start = rti_wdt_start,
> + .ping = rti_wdt_ping,
> + .get_timeleft = rti_wdt_get_timeleft,
> +};
> +
> +static int rti_wdt_probe(struct platform_device *pdev)
> +{
> + int ret = 0;
> + struct device *dev = &pdev->dev;
> + struct resource *wdt_mem;
> + struct watchdog_device *wdd;
> + struct rti_wdt_device *wdt;
> +
> + wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
> + if (!wdt)
> + return -ENOMEM;
> +
> + wdt->clk = devm_clk_get(dev, NULL);
> + if (IS_ERR(wdt->clk)) {
> + if (PTR_ERR(wdt->clk) != -EPROBE_DEFER)
> + dev_err(dev, "failed to get clock\n");
> + return PTR_ERR(wdt->clk);
> + }
> +
> + pm_runtime_enable(dev);
> + ret = pm_runtime_get_sync(dev);
> + if (ret) {
> + if (ret != -EPROBE_DEFER)
> + dev_err(&pdev->dev, "runtime pm failed\n");
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, wdt);
> +
> + wdd = &wdt->wdd;
> + wdd->info = &rti_wdt_info;
> + wdd->ops = &rti_wdt_ops;
> + wdd->min_timeout = 1;
> + /* Set min heartbeat to 1.1x window size */
> + wdd->min_hw_heartbeat_ms = 11 * DEFAULT_HEARTBEAT * 1000 / 20;
> + wdd->max_hw_heartbeat_ms = MAX_HEARTBEAT * 1000;
> + wdd->timeout = DEFAULT_HEARTBEAT;
> + wdd->parent = dev;
> +
> + set_bit(WDOG_RESET_KEEPALIVE, &wdd->status);
> +
> + watchdog_init_timeout(wdd, heartbeat, dev);
> +
> + watchdog_set_drvdata(wdd, wdt);
> + watchdog_set_nowayout(wdd, 1);
> + watchdog_set_restart_priority(wdd, 128);
> +
> + wdt_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + wdt->base = devm_ioremap_resource(dev, wdt_mem);
> + if (IS_ERR(wdt->base)) {
> + ret = PTR_ERR(wdt->base);
> + goto err_iomap;
> + }
> +
> + ret = watchdog_register_device(wdd);
> + if (ret) {
> + dev_err(dev, "cannot register watchdog device\n");
> + goto err_iomap;
> + }
> +
> + return 0;
> +
> +err_iomap:
> + pm_runtime_put_sync(&pdev->dev);
> +
> + return ret;
> +}
> +
> +static int rti_wdt_remove(struct platform_device *pdev)
> +{
> + struct rti_wdt_device *wdt = platform_get_drvdata(pdev);
> +
> + watchdog_unregister_device(&wdt->wdd);
> + pm_runtime_put(&pdev->dev);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id rti_wdt_of_match[] = {
> + { .compatible = "ti,rti-wdt", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, rti_wdt_of_match);
> +
> +static struct platform_driver rti_wdt_driver = {
> + .driver = {
> + .name = "rti-wdt",
> + .of_match_table = rti_wdt_of_match,
> + },
> + .probe = rti_wdt_probe,
> + .remove = rti_wdt_remove,
> +};
> +
> +module_platform_driver(rti_wdt_driver);
> +
> +MODULE_AUTHOR("Tero Kristo <t-kristo@ti.com>");
> +MODULE_DESCRIPTION("K3 RTI Watchdog Driver");
> +
> +module_param(heartbeat, int, 0);
> +MODULE_PARM_DESC(heartbeat,
> + "Watchdog heartbeat period in seconds from 1 to "
> + __MODULE_STRING(MAX_HEARTBEAT) ", default "
> + __MODULE_STRING(DEFAULT_HEARTBEAT));
> +
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:rti-wdt");
> --
> 2.17.1
>
> --
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2020-02-28 18:46    [W:0.120 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site