lkml.org 
[lkml]   [2020]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 5/5] ARM: dts: dra7: Add PRU-ICSS interconnect target-module nodes
Date
The AM57xx family of SoCs contains two identical PRU-ICSS instances
that have a very unique SYSC register. The IPs do not have any
PRCM reset lines unlike those on AM33xx/AM437x SoCs. Add the PRUSS
interconnect target-module nodes with all the required properties.

Each of the PRUSS devices themselves shall be added as child nodes
to the corresponding interconnect node in the future. The PRU-ICSS
instances are only available on AM57xx family of SoCs and are not
supported on DRA7xx family of SoCs in general, so the target module
nodes are added in a separate dtsi file. This new dtsi file is
included in all the AM57xx SoC dtsi files, so the nodes are
automatically inherited and enabled on all AM57xx boards.

Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
v2: No changes

arch/arm/boot/dts/am57-pruss.dtsi | 50 +++++++++++++++++++++++++++++++
arch/arm/boot/dts/am5718.dtsi | 1 +
arch/arm/boot/dts/am5728.dtsi | 1 +
arch/arm/boot/dts/am5748.dtsi | 1 +
arch/arm/boot/dts/dra7.dtsi | 2 +-
5 files changed, 54 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/am57-pruss.dtsi

diff --git a/arch/arm/boot/dts/am57-pruss.dtsi b/arch/arm/boot/dts/am57-pruss.dtsi
new file mode 100644
index 000000000000..b1c583dee10b
--- /dev/null
+++ b/arch/arm/boot/dts/am57-pruss.dtsi
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Common PRUSS data for TI AM57xx platforms
+ */
+
+&ocp {
+ pruss1_tm: target-module@4b226000 {
+ compatible = "ti,sysc-pruss", "ti,sysc";
+ reg = <0x4b226000 0x4>,
+ <0x4b226004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
+ SYSC_PRUSS_SUB_MWAIT)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS1_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x4b200000 0x80000>;
+ };
+
+ pruss2_tm: target-module@4b2a6000 {
+ compatible = "ti,sysc-pruss", "ti,sysc";
+ reg = <0x4b2a6000 0x4>,
+ <0x4b2a6004 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
+ SYSC_PRUSS_SUB_MWAIT)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ /* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00000000 0x4b280000 0x80000>;
+ };
+};
diff --git a/arch/arm/boot/dts/am5718.dtsi b/arch/arm/boot/dts/am5718.dtsi
index d51007c3e8c4..a80c2e3eee2e 100644
--- a/arch/arm/boot/dts/am5718.dtsi
+++ b/arch/arm/boot/dts/am5718.dtsi
@@ -4,6 +4,7 @@
*/

#include "dra72x.dtsi"
+#include "am57-pruss.dtsi"

/ {
compatible = "ti,am5718", "ti,dra7";
diff --git a/arch/arm/boot/dts/am5728.dtsi b/arch/arm/boot/dts/am5728.dtsi
index 82e5427ef6a9..9a3810f5adcc 100644
--- a/arch/arm/boot/dts/am5728.dtsi
+++ b/arch/arm/boot/dts/am5728.dtsi
@@ -4,6 +4,7 @@
*/

#include "dra74x.dtsi"
+#include "am57-pruss.dtsi"

/ {
compatible = "ti,am5728", "ti,dra7";
diff --git a/arch/arm/boot/dts/am5748.dtsi b/arch/arm/boot/dts/am5748.dtsi
index 5e129759d04a..2b65317b1513 100644
--- a/arch/arm/boot/dts/am5748.dtsi
+++ b/arch/arm/boot/dts/am5748.dtsi
@@ -4,6 +4,7 @@
*/

#include "dra76x.dtsi"
+#include "am57-pruss.dtsi"

/ {
compatible = "ti,am5748", "ti,dra762", "ti,dra7";
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index d78b684e7fca..f2e44c0dcd1e 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -143,7 +143,7 @@
* the moment, just use a fake OCP bus entry to represent the whole bus
* hierarchy.
*/
- ocp {
+ ocp: ocp {
compatible = "ti,dra7-l3-noc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
--
2.23.0
\
 
 \ /
  Last update: 2020-02-27 23:30    [W:0.073 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site