lkml.org 
[lkml]   [2020]   [Feb]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next 3/3] net: phy: mscc: implement RGMII skew delay configuration
On Thu, Feb 27, 2020 at 05:25:06PM +0100, Andrew Lunn wrote:
> > Also, do we actually need to write that register only when skews are defined
> > in the DT? Can't we just write to it anyway (I guess the fact that 0_2 skew
> > is actually 0 in value should put me on the right path but I prefer to ask).
>
> Ideally, you don't want to rely on the boot loader doing some
> magic. So i would prefer the skew is set to 0 if the properties are
> not present.

Will do.

Thanks,
Antoine

--
Antoine Ténart, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2020-02-27 19:54    [W:0.039 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site