Messages in this thread | | | From | George Hilliard <> | Subject | [PATCH 0/5] Support the Allwinner F1C100s USB stack | Date | Thu, 27 Feb 2020 12:14:47 -0600 |
| |
The Allwinner F1C100s has an MUSB-based USB peripheral. This patch series implements support for it alongside existing Allwinner support code.
This series was originally written by Icenowy Zheng for Linux v4.14. I've rebased and bugfixed that work against mainline and tested it on both the Lichee Nano and my custom hardware.
George Hilliard (3): dt-bindings: Add new F1C100s compatible strings for USB phy: sun4i-usb: add support for the USB PHY on suniv SoC musb: sunxi: add support for the suniv MUSB controller
Icenowy Zheng (2): ARM: suniv: add USB-related device nodes ARM: suniv: f1c100s: enable USB on Lichee Pi Nano
.../phy/allwinner,sun4i-a10-usb-phy.yaml | 1 + .../usb/allwinner,sun4i-a10-musb.yaml | 1 + .../boot/dts/suniv-f1c100s-licheepi-nano.dts | 16 ++++++++++ arch/arm/boot/dts/suniv-f1c100s.dtsi | 29 +++++++++++++++++++ drivers/phy/allwinner/phy-sun4i-usb.c | 11 +++++++ drivers/usb/musb/sunxi.c | 8 +++-- 6 files changed, 64 insertions(+), 2 deletions(-)
-- 2.25.0
| |